• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.4
• /
• pp.46-53
• /
• 2002

Push-pull strength has been found to be associated with various work factors such as height, distance, repetition, duration, posture and individual factors. Therefore, this study was performed to investigate the effect of various work factors on push-pull strength and muscle recruitment pattern. Work factors were consisted of grip height(elbow, shoulder), grip distance(100%, 50%, and 25% of maximum grip distance) and shoulder angle(neutral($90^{\cire}$), and abduction($45^{\cire}$, $0^{\cire}$)) during sitting work. The results showed that the normalized strength and EMG value were higher at the elbow height than the shoulder height, and increased with grip distance and shoulder adduction. The results of ANOVA showed that there was significant difference on muscle recruitment patterns among the task conditions. Therefore, it is necessary to consider work factors as well as strength to prevent workers from work-related injuries.

• Journal of the Korean Society of Safety
• /
• v.37 no.3
• /
• pp.79-85
• /
• 2022

The annual statistics on fall fatality consistently show the dangers of working at height. The "Occupational Safety and Health Act" specifies legal restrictions on work at height using a scaffold. However, there are different classes of work at height, and some rely only on ropes. This study proposes education, training, and institutionalization of the "rope access work system." In brief, it was concluded that accurate instruction on the knot method and the setting of some standards were important. For this, the use of an integrated work chair harness equipment was suggested.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.2
• /
• pp.167-173
• /
• 1998

Many workers like welders work in squatting postures with the object on the ground during an entire work shift. It is suspected that such prolonged squatting without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is to examine the physical stress caused by the prolonged squatting and to recommend a safe work/rest schedule for a welding task with squatting posture based on the lab experiments. In this study, 8 healthy student subjects participated in the experiment. They maintained a squatting work posture for 16 minutes with 4 different stool height conditions: no stool; 10cm height; 15cm height; and 20cm height. Every 2 minutes, the discomfort was subjectively assessed with the magnitude estimation method for the whole body, lower back, upper leg and lower leg. Based on discomfort ratings, we found that a 10cm height stool relieved the workload most. Discomfort rating results also indicated that a 20cm height stool showed the highest workload, and the there were no difference in workload between a 15cm height stool and no stool. We recommend to use low height stools and to maintain such working postures no longer than 6 minutes for prolonged squatting tasks.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.3
• /
• pp.155-163
• /
• 2016

Objective: This study aims to draw the characteristics of occupational accidents occurred in cabling work, and assess accident severity based on occupational injury data. Background: Accident factors and accident risk are different by the place of work in cabling work. Field managers require information on accident prevention that can be easily understood by workers. However, there has been a lack of studies that focus on cabling work in Korea. Method: This study classifies 450 injured persons caused in cabling work by process, and analyzes the characteristics of occupational injuries from the aspects of age, work experience and accident type. This study also analyzes accident frequency and severity of injury. Results: Results show that preparing/finishing (33.3%) was the most common type of cabling process in injuries, followed by maintenance (28.4%), routing/income (23.1%) and wiring/installation (15.1%) process. The critical incidents in the level of risk management were falls from height in the routing/incoming process, and falls from height in the maintenance process. And, incidents ranked as 'High' level of risk management were slips and trips, fall from height and vehicle incident in the preparing/finishing process, and fall from height in the wiring/installation process. Conclusion and Application: The relative frequency of accident and its severity by working process serve as important information for accident prevention, and are critical for determining priorities in preventive measures.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.3
• /
• pp.289-294
• /
• 2013

PURPOSE: The purpose of this study was to examine differences in erect spinae activities at different height of table during ultrasound therapy in order to propose a optimum work environment. METHODS: Twenty five healthy adult males and females volunteered to participate in this study. EMG signals of both erector spinae(T10, T12, L2, L4) were recorded throught the surface electromyography system at different height of table(45cm, 56.2cm, 67.5cm) during ultrasound therapy work. RESULTS: The higher table heights was, the lower %RVC of the T10, T12, L2, L4 erect spinae at both sides. The left and right T10, T12 and the left L4 showed significant differences. The lower the spinal level was, the higher %RVC of both erect spinae at 45cm, 56.2cm, 67.5cm. The left erect spinae at 56.2cm, right erect spinae at 45cm, 67.5cm showed significant differences. CONCLUSION: The muscle activities of both erect spinae decreased at higher table height and increased lower spinal level. We identified lower table height are risk factor of spine work related musculoskeletal disorders.

• Journal of the Ergonomics Society of Korea
• /
• v.10 no.2
• /
• pp.3-13
• /
• 1991

As the VDT work constrains work postures because of its work characteristics. VDT worksta- tions should be properly designed so as to be fitted to various types of physical conditions of op- erators. Therefore, in this study, the preferred settings of VDT wrokstation dimensions of operators. Therefore, in this study, the preferred settings of VDT workstation dimensions and work postures were studied in order to determine the appropriate dimensions and the work postures for VDT operators which will alleviate the musculoskeletal troubles or visual fatigue. The scpoe of the study is as follows. 1. Measurement and analysis of the preferred settings of the height of workstation, keyboard, seat, and screen among the experienced VDT operators. 2. Anaysis of the relationship between the preferred settings of workstation height and the seat height control among the experienced VDT operators. 3. Analysis of the work postures of the experienced VDT operators.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.89-92
• /
• 2007

This investigation aims at calculating the geoid height, distance between the ellipsoidal height and the orthometric height by GPS/Levelling data for nationwide 58 Bench Marks, and calculating the effect of geoid height to engineering public works. The accuracy of the results from baseline analyses and adjustment of a network. using GPS surveying data by nationwide 58 BM show 4mm for horizontal direction and 7cm for vertical direction. The 58 geoid height was calculated by GPS/Levelling. For a construction work field GPS/Levelling for distributed 4 BM in test area can calculate the orthometric height in 20 ppm relativity accuracy with 95% reliability. Besides the calculated geoid height in the investigation was 0.367m higher than EGM96 model. The test results of a engineering work site, the result by EGM96 model was 1.8cm in 10km and it was also 3.6cm in interpolation method. The results show that it is equivalent to levelling of $20mm\sqrt{S}$.

• IE interfaces
• /
• v.18 no.3
• /
• pp.288-296
• /
• 2005

Many jobs and activities in our daily lives require squatting postures. The fore part includes housekeepers, farmers, and welders and the latter includes a wide variety of activities such as housekeeping; planting, cultivating and harvesting various agricultural products; grinding, welding, etc. It is speculated that prolonged squatting postures without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is conducted to examine the proper height of stools according to the position of the working materials and to develop wearable stools for workers with squatting posture. Forty male and female subjects participated in the experiment to find the proper height of stools according to the position of the working materials. Subjects were asked to squat and work with 3 different working positions: floor level; ankle level; shank level of 3 different stool height conditions: 10cm height; 15cm height; and 20cm height. After 5 minutes of maintaining a squatting work posture while sitting on the different height stools, Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided stools under the conditions of different working positions. The results of statistical analysis show that the subjects preferred 10cm height stool for floor level, 15cm height stool for ankle level, 20cm height stool for knee level. We thus strongly recommend to use appropriate height stools in accordance with the different working positions. Moreover, a prototype wearable stool was designed such that workers with squatting posture do not need to move the stool while they are moving about. The purpose of developing wearable stool was to decrease the physical stress and hence promote worker's health who work with squatting posture.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.90-94
• /
• 1997

Many workers like welders are working in squat sitting postures with te object on the ground for an entire work shift. It is suspected that such prolonged squat sitting without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is to quantitatively evaluate the physical stress caused by the prolonged squat sitting and to recommend a safe work/rest schedule for the task with squat sitting posture based on the lab experiment. In this study, 8 healthy student subjects participated in the experiment. They maintained a squat sitting posture for 16 minutes with 4 different stool height conditions: no stool, 10cm hight, 15cm height, 20cm height. Every 2 minutes, the discomfort was subjectively assessed using the magnitude estimation method for the whole body, lower back, upper leg and lower leg. Based on discomfort rating, we found that 10cm height stool relieved the workload most. Discomfort rating results also indicated that 20cm height stool showed the heghest workload, and that there was no difference in workload between 15cm height and no stool. We recommend to provide the workers with 10cm height stool for prolonged squat sitting tasks.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2003

Objectives : This study was to investigate the relationship analysis in VDT(visual display terminal) of work hours. Methods : Questionnaires were completed by 41 women in VDT operations. The information was used to estimate multiple regression for the VDT of work hours related factors association. Results : The prevalence of the VDT of work hours was significantly higher in the shoulder which followed by the neck, the hand and fingers, the arms, the lowback, the back. The VDT of work hours decreased with aging. The VDT of work hours increased with work duration, single, lower among habitual exercise. The desk height, the seat pan height, the posture on the sitting, the elbow angle all did not meet the recommended criteria. Conclusions : Data from this study support a statistically significant association with satisfaction for occupation.