• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.321-329
• /
• 2003

The change of strain-dependent hydraulic conductivity around mined panels due to subsidence is examined where normal and shear strains, modulus reduction ratio and joint spacing are major factors controlling the changes of hydraulic conductivity. Modulus reduction ratio and joint spacing are defined through RMR and RQD, respectively. Utilizing these two empirical parameters, changes of hydraulic conductivity values of a full gamut of rock mass conditions are determined. The change of hydraulic conductivity is not apparent in the near surface area and more significant change takes place in the area around mined panels. A zone of strong influence from the subsidence extends to a height of approximately 20m above mined panels. The shear strain does also play the role of increasing a hydraulic conductivity around mined panels. As RMR of rock mass decreases, a hydraulic conductivity is found to be increased and this means that subsidence in a poor rock with low RMR has a great effect on a hydraulic conductivity field.

• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.154-162
• /
• 2015

As there is no case study with current status, measurements or description on the state of actual site of rural area only, the delivery of actual conditions about such an area is significantly limited. The purpose of this study is to pinpoint issues with housing conditions of low-income family with disabled members in the rural area. For such a purpose, 25 households of disabled people have been visited for interview, on-site research and survey, of which results are summed up in this paper as following: First, average monthly income of such family turned out to be KRW 480,000, most of which is from the government subsidy. High ratio of such families has resided in a house with average size of approximately 56m2 for about 24 years. Secondly the most needed maintenance work with top priority was for the toilet, and many of the interviewees expressed their discomfort about small size of their bathrooms and inconvenient facilities therein. Thirdly, most of such houses had too high thresholds that posed danger and inconvenience. Such thresholds had average height of 13cm, which can be considered as completely inconsiderate of disabled users. Fourth issue was that these people needed safety handle that will enable them to stand up or to be in the standing posture in the living room and bedroom where they spend most of their time. Fifthly, they wanted finishing materials with waterproof functionality as well as replacement of finishing materials and wallpaper which were too old and caused hygiene issues. As these issues represent, current housing for disabled people in the rural area turned out to be poor and risky space rather than the place where difficulty of individual situation can be resolved or their disability can be complemented. Thus it can be determined that now is the time to arrange the solutions for such housing difficulties and to establish customized housing plan to ensure safety and convenience.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.149-156
• /
• 2013

Men should be able to do whatever they want to and want to safely protected at home which is special domain for them. The disabled live mentally uncomfortable lives at home which should be a place where they should be comfortable and convenient. Renovation projects started in Incheon since 2009 by commencing renovation projects for the disabled by the government and welfare centers. Since the project is a program supported by the government or welfare centers thus priority on renovation was decided and carried out by in-depth interview to decide areas to renovate because of limited budgets. This paper is aimed to propose plans for renovating homes according to priority for renovation for dwellers when renovating homes for the disabled with limited budgets. Renovating home for the disabled can be broadly divided into physical, environmental, esthetic renovations, and physical renovation is a basic renovation for daily lives without restrictions in living and include easy movements, accesses to each rooms and adequacy of movement, easily accesses related with easily accessible distance and height, safety to prevent accidents caused by physical inabilities. Environmental renovation is general supports becoming the base of daily living and include control for controlling lighting, heating, air quality for comfortable environments in living space and pleasantness to maintain bright and pleasant interior with sufficient light. Esthetic renovation includes expression of identity by expressing image of one self and visual effects or spatial consideration for hobbies to enjoy comfortable and rich lives.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.155-165
• /
• 1998

Cultural-historical places, due to their strong symbolic sense of place shared in various people, have important impacts on people's cognitive and emotional reactions. Especially, the visual characteristics of surrounding areas of cultural -historical places directly influence the way the places are perceived, because they function as a visual background of the places. This study examined how the visual characteristics of surrounding landscape of cultural-historical places nfluenced the perception of the places. The visual characteristics of the surrounding landscape was minipulated by a computer simulation in the two aspects; quality and scale. The quality of the simulated landscape was divided by two kinds : natural and artificial . The scale of the simulated landscape was classified by three kinds : 1/3 of the middle ground, 2/3, and 3/3. Specifically, in each photo simulation, simulated natural or artificial background was introduced up to 1/3, 2/3 or the full height of historic monument. After a computer simulation, people's cognitive and emotional reactions to the simulated slides were investigated. The results showed that the quality of surrounding landscape have a great impact on all the cognitive and emotional reactions investigated. On the vontrary, the scale of surrounding landscape was found to habve an impact on partial reactions, such as all the emotions, part of the cognitions, and visiting preference only. The results revealed that the visual characteristics of surrounding landscape should be considered as the crucial elements in planning of cultural-historical places. Based on the study results, several suggestions were made for the landscape planning and conservation for cultural-historical places and historic cities.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.756-759
• /
• 2006

The ocean tide loading (OTL) is an important factor for the GPS positioning, especially in the height direction. The shorter of the distance to the ocean, the larger of the error by the OTL. The influence will be changed when we measure in different place and the order of magnitude is from few centimeters to ten centimeters. In this study, more than ten kinds of the OTL models were collected and applied on the GPS static relative positioning in Taiwan. The GPS observations including five stations were obtained from Nov. 9, 2004 to Feb. 23, 2005 and we used the Bernese GPS software to execute the data processing. In this period, the average amplitudes of the 3-D coordinates are as follows: N is 0.4 cm, E is 0.7 cm, h is 1.8 cm at Kinmen station; N is 0.7 cm, E is 1.3 cm, h is 2.3 cm at Lanyu station; N is 0.5 cm, E is 0.7 cm, h is 2.0 cm at Matsu station; N is 0.6 cm, E is 0.6 cm, h is 2.0 cm at Penghu station and N is 0.5 cm, E is 1.2 cm, h is 1.7 cm at Hsinchu station. Moreover, we will analyze the advantage and disadvantage of every kind of the OTL models in different environments to offer some information to the GPS users and enhance the precision of the GPS positioning.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.115-124
• /
• 2006

This study was conducted to investigate the running motion in the max-velocity phase(150-160m) and the fatigue phase(350-360m) during 400m sprint by performed elementary school athletes. Eighteen elementary school male athletes who achieved at least the 3rd place in the sprint at the Korea Gangwon-Do elementary school track and field meetings during 2004 and 2005 were selected as subjects. The running motions performed by the subjects were recorded using two 8mm high speed cameras at the nominal speed of 100 frames per second. The Direct Linear Transformation technique was adopted from the beginning of filming to the final stage of data extraction. KWON 3D motion analysis package program was used to compute the 3 Dimensional coordinates, smoothing factor in which lowpass filtering method was used and cutoff frequency was 6.0 Hz. The movement patterns during foot touchdown and takeoff for the running stride were related with the biomechanical consideration. Within the limitations of this study it is concluded: In order to increase running velocity, several conditions must be fullfilled at the instant of leg touchdown and takeoff during the fatigue phase(350-360m). First, the body C.O.G(Center of Gravity) height should be raised at the instant of leg touchdown and takeoff during the fatigue phase. Second, the foot contact time should be shortened and the takeoff distance should be increased at the foot takeoff during the fatigue phase. Third, the shank angular velocity with respect to a transverse axis through the center of gravity should be increased during the leg touchdown and takeoff in the fatigue phase. Forth, the active landing style described as clawing the ground with the sole of the foot should be performed during the leg touchdown and takeoff in the fatigue phase) phase. Fifth, In order to increase running velocity in the fatigue phase while taking a slightly greater leg knee angle and body lean angle within the range of the subject's running motion during the fatigue phase would result in greater flight distance.

• Journal of Korean Elementary Science Education
• /
• v.26 no.2
• /
• pp.161-170
• /
• 2007

This study aims at helping us improve the methods used to teach elementary school students how to handle experimental apparatus by examining their manual skills and their understanding of the alcohol lamp, spuit and thermometer. To evaluate their ability to handle each experimental apparatus, a practical skills test and knowledge evaluation sheets were developed. The evaluation was carried out with 270 students from 2 classes each in the 3rd, 4th, 5th and 6th grade of D Elementary School located in Daejeon City. For their handling ability of the alcohol lamp, the results for the practical skills test showed that the students had a very low ability in placing objects in the center of the apparatus for safe use and also in adjusting the height of the trivet to place objects so that they contact the outer flames correctly. For the spuit, the pass rate of the skills test was generally low in regards to how students should grasp a spuit and the timing and method of depressing the rubber part before dipping it into liquid. For the thermometer, on the other hand, the pass rate was relatively high in every respect. The knowledge evaluation results for the use of experimental apparatus showed a very high rate of correct answers for alcohol lamps and thermometers. The test results for spoils also produced a relatively high rate of correct answers, with the exception of the test item regarding the way that students should grasp them.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2019-2026
• /
• 2001

In this paper, we proposed the car license plate extraction and recognition algorithm using both the dynamical thresholding method and the kohonen algorithm. In general, the areas of car license plate in the car images have distinguishing characteristics, such as the differences in intensity between the areas of characters and the background of the plates, the fixed ratio of width to height of the plates, and the higher dynamical thresholded density rate 7han the other areas, etc. Taking advantage of the characteristics, the thresholded images were created from the original images, and also the density rates were computed. A candidate area was selected, whose density rate was corresponding to the properties of the car license plate obtained from the car license plate. The contour tracking method by utilizing the Kohonen algorithm was applied to extract the specific area which included characters and numbers from an extracted plate area. The characters and numbers of the license place were recognized by using Kohonen algorithm. Kohonen algorithm was very effective o? suppressing noises scattered around the contour. In this study, 80 car images were tested. The result indicate that we proposed is superior in performance.

• Korean Journal of Health Education and Promotion
• /
• v.12 no.1
• /
• pp.111-127
• /
• 1995

This study was designed to investigate the relationships between children's physical growth and health and their raising conditions and to find out the important conditions to improve their physical growth and health. The rasing conditions were classified into three major parts; i. e., family conditions, conditions of nutrition up-taking, and conditions of rest or sleep and exercise or play. Then, the questionnaire including the items to survey these three areas of raising condition and the items to evaluate the health status were given to children' mothers or fathers and filled up by them. The data of their 4 anthropometric measures; body weight, stature, sitting height and chest girth, were also collected from their latest records of health examination. The data of health status were converted to health scores representing 6 domains of health; digestive organs, respiratory organs, auto-nerve systems, fatigue, others and health as a whole. Then, correlations of raising conditions were determined with four antropometric measures and 6 health scores as criterion variables. Then, number of families to live together, and child's birth order in the domain of family conditions, habits of unbalanced diet, eating frequency of eggs, fruits, green and yellow vegetables, light colored vegetables, milk products in the domain of nutrition up-take, and the time for study at home, the place for play, the number of friends to play with together, the hours for playing out of door, the hours for playing sports, and the hours to move their body for assisting house keeping were picked out to investigate their relationships with physical growth and health status. Then, their habits of unbalanced diet and eating frequency of eggs, green or yellow colored vegetables, and milk products were found more influential conditions and more over, birth order, the time for study at home, the time to play out of door showed moderate degree of connection with physical growth and health status in early childhood.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.61-65
• /
• 2002

The experiment was conducted to find out the effect of four feeding systems namely; stall feeding, tethering, restricted grazing and grazing on carcass characteristics of Black Bengal goat. Twenty four does of approximately 1 year of age were randomly selected for four treatments of feeding systems having 6 replications in each. Stall fed goats were kept into house all time and adequate amount of natural grass were supplied for ad libitum feeding. Goats of tethering group were tethered for eating natural grass from 8 a.m. to 4 p.m. and were transferred after one hour interval for changing the grazing place. Goats of restricted grazing group were allowed for grazing from 8 a.m. to 1 p.m. Goats of grazing group were grazed for 8 a.m. to 4 p.m. Concentrate supplement was given at the rate of 150 g per day per goat for all of the treatment groups. Goats were slaughtered after the experiment of 219 days. Body length and height at wither were significantly higher in stall feeding group than others. Average dressing percentage were 42.18, 39.0, 36.79 and 34.0 for stall feeding, tethering, restricted grazing and grazing groups, respectively. Dressing percentage varied significantly (p<0.05) among feeding groups. Caul fat and empty gut weight differed significantly (p<0.05) in all of the feeding systems but others non-carcass parameters did not differ significantly. Percentage of dry matter and ether extract were also significantly (p<0.05) higher in stall fed groups. In conclusion, among four treatment groups, performance of stall fed goats were most satisfactory and then tethering showed better performance than any other groups.