• Fisheries and Aquatic Sciences
• /
• 제5권3호
• /
• pp.219-228
• /
• 2002

Based on the five-year (October 1992 through September 1997) Topex/Poseidon altimeter measurements, we describe the statistical characteristics of the eddy variability in the East Sea in terms of sea surface height anomaly, slope variability, and eddy kinetic energy (EKE). The sea surface height anomalies in the East Sea are produced with standard corrections from Topex/Poseidon measurements. In order to eliminate the high frequency noise in the sea surface height anomaly data, the alongtrack height anomaly data was filtered by about 40 km low-pass Lanczos filter based on Strub et al. (1997) and Kelly et a1. (1998). We find that there exists a distinct spatial contrast of high eddy variability in the south and low eddy energy in the north, bordering the Polar Front. In the northwestern area $(north\;of\;39^{\circ}N\;and\;west\;of\;133^{\circ}E)$ from the Polar Front where the eddies frequently appear, the EKE is also considerabel. The high kinetic energy in the southern East Sea reveals a close connection with the paths of the Tsushima Warm Current, suggesting that the high variability in the south is mainly generated by the baroclinic instability process of the Tsushima Warm Current. This finding is supported by other studies (Fu and Zlontnicki, 1989; Stammer, 1997) wh.ch have shown the strong eddy energy coupled in the major current system. The monthly variation of the EKE in both areas of high and low eddy variability shows a strong seasonality of a high eddy kinetic energy from October to February and a relatively low one from March to September. The sequential pattern of wind stress curl shows resemblance with those of monthly and seasonal EKE and the two sequences have a correlation of 0.82 and 0.67, respectively, providing an evidence that wind stress curl can be the possible forcing for the monthly and seasonal variation of the EKE in the East Sea. The seasonality of the EKE also seems to correlate with the seasonality of the Tsushima Warm Current. There also exists the large spatial and interannual variabilities in the EKE.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.27-39
• /
• 2005

This study is to show the qualitative analytic methods of facial asymmetry with three-dimensional morphometry and find out asymmetry change resulted from enlarging three local regions. Steel balls (1.2mm in diameter) were attached in twenty seven landmarks of a symmetrical artificial human skull. This artificial human skull was used as experimental materials. Twelve different asymmetrical artificial human skulls were formed by gradually enlarging the mandibular body length, gonial angle, and ramus height of the left hemiface. From the three-dimensional morphometry of each skull type, nine local area measurements and three total sum area measurements(representing the mandibular area, maxillary area, and lower facial area) were acquired and made into the surface area asymmetry degree. Menton deviation itself was used as the surface area asymmetry degree while right-left percentages were used in the other measurements. These surface area asymmetry degrees were compared with each other to find out asymmetry change according to the degree of actual facial asymmetry. Through the statistical analysis, following results were obtained. The results were as follows: 1. Left maxillary area of artificial human skull was 7.13$\pm$0.26% larger while mandibular area was 4.14$\pm$0.12% smaller than each those of right hemiface. After all, left lower facial area was 1.44$\pm$0.07% larger than those of right hemiface.(n=7). 2. Among the reduce rates of surface area asymmetry degree resulted from enlarging three local regions, ramus height was similar to mandibular body length while it was bigger than those of gonial angle. 3. Among the increase rates of menton deviation resulted from enlarging the local regions, ramus height was the biggest, mandibular body length was the second and gonial angle was the smallest. These results suggest that three-dimensional morphometry can be used to qualitatively analyse facial asymmetry and the asymmetry degree is more influenced by enlarging the ramus height, mandibular body length than those of gonial angle.

• Journal of Periodontal and Implant Science
• /
• 제50권1호
• /
• pp.38-47
• /
• 2020

Purpose: The aim of this study was to investigate the available alveolar bone height between the maxillary molars and the sinus floor according to their anatomical relationship using cone-beam computed tomographic (CBCT) images. Methods: A total of 752 maxillary first (M1) and second molars (M2) on CBCT scans of 188 patients were selected. First, each maxillary molar was categorized as type 1, 2, 3, or 4 according to the relationship of the molar root with the maxillary sinus floor. The frequency distribution of each type was analyzed. Second, the shortest vertical distance (VD) of each molar was measured from the furcation midpoints of the roots to the lowest point of the sinus floor by 2 observers. Intraclass correlation coefficients and the t-test were calculated for the VD measurements. Results: For M1, type 3 was the most frequent, followed by type 2. For M2, type 3 was the most common, followed by type 1. The VD measurements of type 1 were 9.51±3.68 mm and 8.07±2.73 mm for M1 and M2, and those of type 3 were 3.70±1.52 mm and 4.03±1.53 mm for M1 and M2, respectively. The VD measurements of M2 were significantly higher in female patients than in male patients. Conclusions: Type 3 was the most frequent anatomical relationship in the maxillary molars, and showed the lowest alveolar bone height. This information will help clinicians to prevent complications related to the maxillary sinus during maxillary molar treatment and to predict the available bone height for immediate implant planning.

• 한국의류학회지
• /
• 제9권3호
• /
• pp.1-7
• /
• 1985

연구의 목적은 의류생산에 있어서 동양(Oriental women)과 서양여자(Caucasian women: U.S.A)의 인체계측에 의한 치수의 비교를 하였다. 연구자료는 동양여자 100명과 서양여자 970명의 자료로 비교하였다. 동양여자의 인체계측치는 1981년 4월 일본에서 필자에 의해 수집되고 서양여자의 인체계측치는 1976년 11월부터 1977년 2월 미국(U.S.A by the Quartermaster Corps of the United States Army)에서 인체계측을 한 자료이다. 동양과 서양여자의 인체계측치 중에서 각각 32항목을 선출하여 비교된 것은 높이항목과 길이항목(height-related measurements; height and length), 나비항특(surface measurements; breadth and depth) , 둘레항목(measurement of circumference)이다. 32항목을 평균치의 t-test로 동양인과 서양인을 비교한 결과, 모든 항목에서 P<.001 수준에서 유의한 차를 보였다. 그 중에서 머리둘레, 목둘레, 손목둘레, 팔굼치둘레, 손바닥둘레의 항목에서는 동양인이 서양인에 비해서 큰 값을 나타냈다. 그 외에 27개 항목은 동양인이 전부 높거나, 길거나, 또는 큰 값을 나타냈다. 표준편차에서 보이는 바와 같이 서양인자가 동양여자보다 크고, 특히 높이 항목, 길이항목(height-related measurements)이 더 높거나 길다. 이러한 결과로서 동양과 서양여자의 인종적인 측면에서, 다양한 의류생산에 있어서 고려해야 할 것 같다. 이 동양과 서양여자의 인체계측비교에 중요한 요점을 두고 연구한 것은 의류생산과정에 있어서, size설정, 보다 미적인 design, 의복구성을 위한 등등에 고려되겠으나, 특히 미국과 같은 대량생산국에서 동양과의 무역(import or export)에 있어서 중요하게 고려가 될것이며, 나날이 발전하는 우리나라의 의류무역에도 고려되리라 본다. 뒤에 recommendations for future research에서 말한 바와 같이 서양과 한국여자의 입체계측비교를 하며 우리나라의 의류무역(수출)에 도움이 되었으면 한다.

• 대한치과의사협회지
• /
• 제13권5호
• /
• pp.421-427
• /
• 1975

• 핵의학기술
• /
• 제23권1호
• /
• pp.40-44
• /
• 2019

목적: $^{99m}Tc$-DTPA를 이용한 사구체 여과율 측정에서 신장(Height)과 체중(Weight)의 변동에 따른 사구체 여과율의 변화 정도를 확인하고 표준화된 신체 계측의 중요성에 대해 제고하고자 한다. 실험재료 및 방법: 서울아산병원 핵의학과에 사구체 여과율 검사를 위해 내원한 50명을 대상으로 전자의무기록(EMR)에 기록된 한 달 이내의 신체 계측 값의 변화를 조사하였고, 신장(Height)과 체중(Weight)의 변화 폭이 가장 컸던 값을 기준으로 신장(Height)과 체중(Weight)을 변화시키며 사구체 여과율을 재산출하여 그 변화를 분석하였다. 결과: 신장(Height)이 1cm 증가할 때마다 사구체 여과율은 평균 0.6%씩 감소하였고. 체중(Weight)이 1kg 증가할 때마다 사구체 여과율은 평균 1.6%씩 증가하였다. 결론: 신장(Height)과 체중(Weight)의 오류로 인한 사구체 여과율의 오류를 줄이기 위해서는 신체 계측 방법에 대한 표준화가 필요하며, 신체 계측에 영향을 줄 수 있는 변수에 대한 통제가 필요할 것으로 사료된다.

• Imaging Science in Dentistry
• /
• 제50권1호
• /
• pp.37-43
• /
• 2020

Purpose: The purpose of this study was to evaluate the accuracy of linear measurements in the horizontal and vertical dimensions based on object position and slice inclination in cone-beam computed tomography (CBCT) images. Materials and Methods: Ten dry sheep hemi-mandibles, each with 4 sites (incisor, canine, premolar, and molar), were evaluated when either centrally or peripherally positioned within the field of view (FOV) with the image slices subjected to either oblique or orthogonal inclinations. Four types of images were created of each region: central/cross-sectional, central/coronal, peripheral/cross-sectional, and peripheral/coronal. The horizontal and vertical dimensions were measured for each region of each image type. Direct measurements of each region were obtained using a digital caliper in both horizontal and vertical dimensions. CBCT and direct measurements were compared using the Bland-Altman plot method. P values <0.05 were considered to indicate statistical significance. Results: The buccolingual dimension of the incisor and premolar areas and the height of the incisor, canine, and molar areas showed statistically significant differences on the peripheral/coronal images compared to the direct measurements (P<0.05). Molar area height in the central/coronal slices also differed significantly from the direct measurements (P<0.05). Cross-sectional images of either the central or peripheral position had no marked difference from the gold-standard values, indicating sufficient accuracy. Conclusion: Peripheral object positioning within the FOV in combination with applying an orthogonal inclination to the slices resulted in significant inaccuracies in the horizontal and vertical measurements. The most undesirable effect was observed in the molar area and the vertical dimension.

• 치과방사선
• /
• 제24권2호
• /
• pp.381-390
• /
• 1994

The purpose of this study was to determine whether any similarity existed in craniofacial morphology between parents and offspring in cleft lip with or without cleft palate. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in 28 families comprising 28 fathers, 28 mothers and 28 cleft patients. The measurements of cleft patients were compared with those of their fathers, mothers and midparents. The obtained results were as follows: 1. There were similar measurements between the cleft patients and their fathers; rama1 height(Ar-Go), mandibular angle(∠MP-RP). 2. There were similar measurements between the cleft patients and their mothers; cranial base angle(∠NSBa), relation of maxilla to the cranial base(∠SNA), relation of maxilla to the cranial base(soft tissue:∠BaN'Sn), angle of inferior border of mandible(∠SNL-MP) and convexity of nose apex(soft tissue:∠N'PmPog'). 3. There were similar measurements between the cleft patients and their midparents; ramal height (Ar-Go), cranial base angle( ∠NSBa), relation of maxilla to the cranial base(soft tissue: ∠BaN'Sn), Y axis angle(∠NSGn) and mandibular angle(∠MP-RP). 4. There was no similar measurements between the cleft patients and their fathers and mothers simultaneously.

• 복식문화연구
• /
• 제18권1호
• /
• pp.93-108
• /
• 2010

R$\ddot{o}$hrer index, Vervaeck index and Body Mass Index(BMI) are frequently used in order to judge obese subjects in clothing & textiles field. However, there are no certain criteria of judging the degree of obesity. Each researcher utilized these obesity indices according to their own criteria so far. Therefore, the purpose of the study is to suggest a reliable obesity index and new criteria for judging the degree of obesity. The results are as follows; Utilizing frequency analysis, main percentiles, minimums, maximums and ranges were presented by 5 age groups from twenties to sixties. Obesity rates dramatically increased, the subject got older. Especially, obesity rate of the subjects in their fifties and sixties were much higher than other age groups. 1.6 & higher can be used in the R$\ddot{o}$hrer index, 98 & higher can be used in the Vervaeck index, and 25 & higher can be used in the BMI as the Optimal criteria of the obesity. Total of 24 body measurements and 3 obesity indices were used for analyzing the correlation analysis. All heights measurements showed negative correlation with the 3 obesity indices. It is determined heights measurements have high correlation with R$\ddot{o}$hrer index compare to other indices. Crotch height, interscye back, neck shoulder point to breast point, bust circumference, waist circumference, upper arm circumference and armscye circumference have high positive correlation with all obesity indices. According to the ANOVAs by each percentile group of the R$\ddot{o}$hrer and Vervaeck indices, there are big significances in all measurements and obesity indices except arm length. In general, heights decreased significantly by getting bigger, while circumferences and lengths, widths and indices increased rapidly by getting bigger. The results of the analysis by each percentile group in the BMI, it showed the significant differences in the all measurements except cervical height and arm length. There were similar tendency of differences according to the degree of the obesity in BMI percentile groups. It was confirmed that the BMI is the most reliable index for judging the obesity owing to the high correlations and significant differences with other measurements.

• Imaging Science in Dentistry
• /
• 제49권1호
• /
• pp.9-17
• /
• 2019

Purpose: This study aimed to introduce a novel method to evaluate the alveolar bone and interdental septum in the anterior mandible using cone-beam computed tomography (CBCT). Materials and Methods: Fifty-six CBCT scans from adult patients were selected. The CBCT scans were obtained before and after orthodontic treatment. The following measurements were taken: width of the alveolar bone and the interdental septum, height of the interdental septum, height of the bone plates, distance between the cementoenamel junction and marginal bone crests, and vertical positioning of the mandibular incisor, using the lingual plane as a reference. To test the reproducibility and the stability of the lingual plane, a triangle was traced in the anterior mandible. The intra-class correlation coefficient(ICC) was used to determine intra- and inter-examiner agreement. The paired Student t-test was used to evaluate the area of the triangle and the reproducibility of all measurements. Results: The ICC was excellent for the alveolar bone and dental measurements (0.9989 and 0.9977, respectively), as well as for the interdental septum (0.9987 and 0.9961, respectively). The area of the triangles showed stability in the lingual plane (P>0.05). For the alveolar bone, mandibular incisor, and interdental septum measurements, no statistically significant differences were found between the 2 examiners(P>0.05), confirming the technical reliability of the measurements. Conclusion: The method used in this study provides a valid and reproducible assessment of alveolar bone dimensions in the anterior mandible measured on CBCT images.