• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.59-66
• /
• 2000

This study describes the precise DTM by image processing method through scanning the positive film of aerial photo using scanner instead of plotter. First, scanned the positive film of aerial photo by drum scanner and flatbed scanner in different resolution, and then compared the height from image processing method using auto correlation method with height which is taken using $50^m{\times}50^m$ grid in 1 :5,000 geographical map. It shows that heights from aerial photo image of high resolution obtained from scanner are comparable to the heights from 1：5,000 geographical map.

• Journal of Urban Science
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2021

The purpose of this study was to evaluate accessibility condition of buildings in a college from manual wheel chair users' perspective in order to suggest improvements, and to develop 3D accessibility maps in order to assist manual wheelchair users' prior planning for the building use. In May 2020, on-site investigation was held to three buildings in Chungbuk National University. Major findings were as follows. (1) There were some building entrances that showed level difference over 2cm without proper ramp with slow slope 1/8 or less. (2) Some rooms were found to have accessibility issues to have floors with height more than 2cm, and/or to have no height-adjustable desks. (3) Although accessible restrooms were in good condition for manual wheelchair users' access and use, it is suggested to install accessible restroom for each gender in each floor for better access. Using the study results, 2-dimensional accessibility maps for each floor were developed in color and grayscale, which were further developed into 3-dimensional accessibility maps for each building.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.78-95
• /
• 2011

This study has developed various DEMs with different spatial resolutions using many different interpolation methods with the aid of a 1:5,000 digital map. In addition, this study has evaluated the vertical accuracy of various DEMs constructed by check point data obtained from the network RTK GPS survey. The obtained results suggest that a DEM developed from the TIN-based Terrain method performs well in evaluating height restriction of buildings in a flying safety area considering general RMSE values, land-type RMSE values and profile evaluation results, etc. And, it has been found that three meters is the right spatial resolution for a DEM in evaluating height restriction of buildings in a flying safety area. Meanwhile, elevation values obtained by the DEM are not point estimation values but interval estimation values. This can be used to check whether the height of buildings in the vicinity of an airfield violates height limitation values of the area. To check whether the height of buildings measured in interval estimation values violates height limitation values of the area, this study has adopted three steps: 1) high probability of violation, 2) low probability of violation, 3) inconclusiveness about the violation. The obtained results will provide an important basis for developing a GIS related to the evaluation of height restriction of buildings in the vicinity of an airfield. Furthermore, although results are limited to the study area, the vertical accuracy values of the DEM constructed from a two-dimensional digital map may provide useful information to researchers who try to use DEMs.

• Journal of Korean Elementary Science Education
• /
• v.40 no.3
• /
• pp.390-406
• /
• 2021

This study investigated how elementary students with different spatial ability constructed spatial thinking process about on volcanoes and earthquakes with GeoMapApp-based materials. Students' spatial thinking process was analyzed in terms of spatial concept recognized, tools of spatial representation, and their spatial reasoning to construct topographic structure. The student group with high-scored spatial ability showed the spatial reasoning based on internal representation of building mental images through sectional division of horizontal distance, directly connected with spatial concept, or distorting spatial concept. The student group with low-scored spatial ability built the spatial reasoning directly connected with spatial concept instead of transforming into internal representation, and partially recognized spatial concept on either distance or depth. Based on the results, we argued identifying spatial concepts such as distance, height, or depth from the GeoMapApp data would be funda- mental for the better spatial thinking.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.45-58
• /
• 1999

Digital map is utilized for an effective display of the distributions of the hydrogeological variables such as water table height(hydraulic head) and log-transmissivity(lnT) in north Pohang, KyungBug. Specifically the geostatistical method kriging is used to construct the distributions in an unconfined aquifer from a finite set of measured data. The experimental variograms for both the head and lnT suggest spherical models with nugget of 0 and range of 6km. The kriged results by using these variograms show that the head decreases primarily from the west to the east with a large peak in the north-western part and lnT is at the maximum level in the central part with outwardly decreasing trend. The constructed delineation is also used to calculate the flow field in the region. Finite differences with second order consistency are used to calculate the fluxes in the east(x) and north(y) across a vertical cross-section of unit width and height equal to the thickness of the wet zone in the aquifer. It is demonstrated that the flow is dominantly in the east with diverging trend on the eastern hillside of the water table peak. A few convergent spots also appear.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.145-149
• /
• 2009

High-resolution atmospheric numerical system was set up to simulate the motion of the atmosphere and to produce the wind map on land. The results of several simulations were improved compare to the past system, because of using the fine geographical data, such as terrain height and land-use data, and the meteorological data assimilation. To estimate surface maximum wind speed when a typhoon is expected to strike the Korea peninsula, wind information at the upper level atmosphere was applied. Using 700hPa data, wind speed at the height of 300m was estimated, and surface wind speed was estimated finally considering surface roughness length. This study used formula from other countries and estimated RMW but RMW estimation formula apt to Korea should be developed for future.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.39-45
• /
• 1974

The objects of this study are to induce the experimental equation suitable to estimate the height growing process, and to get some information that could be to reduce the error percent on determining the site index. The height growing process per sample plot were made up from the height age curve getted through the stem-analysis of the dominant tree. The 11 equations were calculated in the functional formulas between the age and the dominant height of Alnus hirsuta, Larix leptolepsis, L. Gmelini, P. koraiensis, Abies holophylla, P. rigida, Q. acutissima and Q. aliena. The suitable equation for estimating the guide curve were selected with the highest correlation and the low standard error with comparision on the age-height distributed map as Fig. 2. The suitable equation is different between the species as their calculated results as follows; The growing process of tree height are occasionally found to be polymorphous in the growth pattern as Fig. 3. By this result, the site index are practically found to be always not constant but shows variation to age in same plot as example 5. So, that the site index are estimated from the height-growth curve to age drawing by the stem-analysis or the polymorphic-curve, are concluded to be suitable on the study of site evaluation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.5
• /
• pp.1-12
• /
• 2019

It is important to measure the height of trees as an essential element for assessing the forest health in urban areas. Therefore, an automated method that can measure the height of individual tree as a three-dimensional forest information is needed in an extensive and dense forest. Since airborne LiDAR dataset is easy to analyze the tree height(z-coordinate) of forests, studies on individual tree height measurement could be performed as an assessment forest health. Especially in urban forests, that adversely affected by habitat fragmentation and isolation. So this study was analyzed to measure the height of individual trees for assessing the urban forests health, Furthermore to identify environmental factors that affect forest growth. The survey was conducted in the Mt. Bongseo located in Seobuk-gu. Cheonan-si(Middle Chungcheong Province). We segment the individual trees on coniferous by automatic method using the airborne LiDAR dataset of the two periods (year of 2016 and 2017) and to find out individual tree growth. Segmentation of individual trees was performed by using the watershed algorithm and the local maximum, and the tree growth was determined by the difference of the tree height according to the two periods. After we clarify the relationship between the environmental factors affecting the tree growth. The tree growth of Mt. Bongseo was about 20cm for a year, and it was analyzed to be lower than 23.9cm/year of the growth of the dominant species, Pinus rigida. This may have an adverse effect on the growth of isolated urban forests. It also determined different trees growth according to age, diameter and density class in the stock map, effective soil depth and drainage grade in the soil map. There was a statistically significant positive correlation between the distance to the road and the solar radiation as an environmental factor affecting the tree growth. Since there is less correlation, it is necessary to determine other influencing factors affecting tree growth in urban forests besides anthropogenic influences. This study is the first data for the analysis of segmentation and the growth of the individual tree, and it can be used as a scientific data of the urban forest health assessment and management.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.120-128
• /
• 2017

The aim of this study is to analyze the accuracy of SRTM Ver 3.0 and ASTER GDEM Ver 2 over Korea. To enable this, accuracy analysis was performed by using precise DEM which was made with multiple aerial image matching and national base map benchmark. The result of this study identified both SRTM and ASTER have different features. The height of the SRTM was found to be higher (3.8 m on average) at lower elevation and lower (8.4 m on average) at higher elevation. In contrast, the ASTER was found to be lower than the actual height at both lower and higher elevation (2.92 m, 4.51 m on average). The cause of this height bias according to the elevation is due to the differences in data acquisition and processing methods of DEM. It was identified however that both SRTM and ASTER were within allowable limits of error. In addition, RMSE of the SRTM was smaller than the ASTER in comparison to benchmark, and also the bias trend both at higher and lower terrain were similar to the precise DEM which was made with multiple aerial image matching. Therefore, the reliability of SRTM can be considered to be higher.

• Korean Journal of Remote Sensing
• /
• v.22 no.2
• /
• pp.101-110
• /
• 2006

The accuracy of rural land cover using airborne multispectral images and LEAR (Light Detection And Ranging) data was analyzed. Multispectral image consists of three bands in green, red and near infrared. Intensity image was derived from the first returns of LIDAR, and vegetation height image was calculated by difference between elevation of the first returns and DEM (Digital Elevation Model) derived from the last returns of LIDAR. Using maximum likelihood classification method, three bands of multispectral images, LIDAR vegetation height image, and intensity image were employed for land cover classification. Overall accuracy of classification using all the five images was improved to 85.6% about 10% higher than that using only the three bands of multispectral images. The classification accuracy of rural land cover map using multispectral images and LIDAR images, was improved with clear difference between heights of different crops and between heights of crop and tree by LIDAR data and use of LIDAR intensity for land cover classification.