• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.3
• /
• pp.91-102
• /
• 2019

This study explores the causes and processes of morphological transformation of apartment complexes in Busan. All apartment complexes built until the year 2016 were selected for statistical analysis, drawing/map examination, field observation, selected expert interviews based on 6 periodical groups: Period I(~1990), Period II(1991~1995), Period III(1996~2000), Period IV(2001~2005), Period V(2006~2010), and Period VI(2011~2016). The research argues for three 'arrangement' types, P1U, L1U and P2U, which have dominated the whole periods occupying 88% of the total 260 complexes. The switch of the leading type represents for morphological transformation of apartment complexes. Four aspects, density(F.A.R.), height(maximum number of floors), deformed-building-type ratio, and building-orientation, have affected the change of 'arrangement' types. Density was the major cause of the arrangement-type switch, from P1U to L1U, on Period II(1991~1995). The morphological change, from type L1U to P2U, on Period V(2006~2010) was caused by height and orientation, and is correlated with the increased number of deformed-type buildings. The first phase morphological change on Period II(1991~1995) was resulted by the supply side of apartment. However, the second phase transformation on Period V(2006~2010) had gone through the complex process including reflection of consumers' demands. The significance of research is to reveal the morphological transformation process of apartment complexes through analytical investigation of the entire apartment data in Busan. The result shows that the major change of urban paysage started to occur from Period V(2006~2010), and the superficial evaluation on apartment 'being monotonous and repetitive' may not be proper at least from the perspective of town plan.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.101-115
• /
• 2006

As coastal erosion is increasing sharply because of sudden changes in the natural environment and increases in artificial development, the problem of coastal erosion become an important issue, socially and economically. To building the data which needed to grasp the situation and find a solution, we need the monitoring system for long-term. In this study, we analyzed the coastal topography and land cover changes in the Haeundae Beach during 60 years. The Haeundae Beach is the most famous beach in the country and coastal erosion are going on. First, we analyzed the change of coastal topography by calculated the coastline and area of the beach using aerial photos during 60 years. We extracted the coastline by digitized on aerial photo and corrected the height of tide level using sounding and GPS survey data. And we computed the area of beach and analyzed the change of area during 60 years. Second, we analyzed the change of land cover using landcover map. We made the detailed landcover map by on-screen digitizing and estimated the soil loss for the area nearby Haeundae Beach. As a result, we could see that the coastline get nearer to land and the area of beach has been reduced in general. We think that interception of sand supply by the development is the artificial cause of coastal erosion. The result of this study would be useful in long-term coastal monitoring and to analyze the cause of coastal environment change. We expect that the result is available on the coastal information system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.192-197
• /
• 2009

This study was conducted to investigate the effect of site-specific variable fertilization following digital fertility map generated from soil analysis on rice growth and yield. The site-specific application of fertilizer was implemented by using rice transplanter equipped with side dressing applicator and global positioning system (GPS). Coefficient of variation (C.V.) of soil nitrogen content was reduced after the experiment, and spatial variation of semivariogram was reduced. Rice growth from tillering to ripening stage, plant height, tiller and panicle number increased at site-specific variable fertilization treatment, and coefficient variation (C.V.) of each growth characteristics was lower than those of conventional fertilization treatment. As a result, fertility in the rice field was more uniform become of site-specific fertilizer application. Head rice yield of site-specific application plot increased by 9% (i.e., to from 450 kg/10a to 492 kg/10a of the control plot) and its CV was significantly reduced to 3.5 compared to 7.8 of the control plot. In addition, there was no significant difference in amylose, protein contents and whiteness of milled rice, but its CV was reduced.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.282-292
• /
• 2003

This paper proposes an efficient data structure for forwarding IPv4 and IPv6 packets at the gigabit speed in backbone routers. The LPM(Longest Prefix Matching) search becomes a bottleneck of routers' performance since the LPM complexity grows in proportion to the forwarding table size and the address length. To speed up the forwarding process, this paper introduces a data structure named BMT(Bit-Map Tie) to minimize the frequent main memory accesses. All the necessary search computations in BMT are done over a small index table stored at cache. To build the small index table from the tie representation of the forwarding table, BMT represents a link pointer to the child node and a node pointer to the corresponding entry in the forwarding table with one bit respectively. To improve the poor performance of the conventional tries when their height becomes higher due to the increase of the address length, BMT adopts a binary search algorithm for determining the appropriate level of tries to start. The simulation experiments show that BMT compacts the IPv4 backbone routers' forwarding table into a small one less than 512-kbyte and achieves the average speed of 250ns/packet on Pentium II processors, which is almost the same performance as the fastest conventional lookup algorithms.

• Journal of Wetlands Research
• /
• v.9 no.2
• /
• pp.33-43
• /
• 2007

Distribution area, actual vegetation map, standing crop biomass, relative growth, and primary productivity of Salix spp.were investigated to provide the basic data necessary for conservation and ecotechnological application of Salix community in the Upo wetland, Changryeong County, Gyeongsangnamdo Province, Korea from April 2005 to April 2006. 1. Among seven Salix species, the dominant species was S. nipponica and S. glandulosa was subdominant. There were six kinds of Salix communities such as S. nipponica, S. glandulosa, S. koreensis, S. nipponica-S. glandulosa, S. glandulosa-S. nipponica, and S. nipponica-S. koreensis. 2. Distribution area of S. nipponica community was largest as 28.46 ha among Salix communities and those of S. nipponica-S. glandulosa community, S. glandulosa-S. nipponica community, S. nipponica-S. koreensis community, S. glandulosa community, and S. koreensis community were 6.12 ha, 6.12 ha, 2.92 ha, 1.86 ha, and 0.81 ha, respectively. 3. The tree age, tree height, and DBH of S. nipponica were 5~13year, 4.1~7.2 m, and 3.0~14.0 cm and those of S. glandulosa were 2~36year, 3.5~10.1 m, and 3.2~26.0 cm, respectively. 4. The standing crop of S. nipponica was 408 ton and that of S. glandulosa was 336 ton in the study area. 5. The productivity of S. nipponica was $235g\;m^{-2}yr^{-1}$ and the annual production was 86.4 ton, and those of S. glandulosa were $1,006g\;m^{-2}yr^{-1}$ and 80.3 ton in the study area.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.39-50
• /
• 2015

This research selected Daegu Metropolitan City representing a combination of natural space and urban space for this case study. To achieve this, a prerequisite was to set up an optimal block size to evaluate landscape diversity of the research site by using a RPR-Area Curve. Further, landscape diversity evaluation was conducted based on land cover map by using FRAGSTATS to analyze spatio-temporal changes. Notably, this research regarded it as the most significant to set forth criteria in order to apply landscape diversity to the development plans of the newtown and outskirt of a city under high pressure development. Results derived from this research are summarized as follows. According to the results derived from establishing the optimal block size, a size about $2km^2$ was analyzed to measure landscape diversity of the research site. Also, according to the results derived from land diversity evaluation based on land cover map, land diversity was highly measured around urban stream such as Nakdong River and Geumho River, and in particular, the value of landscape diversity was measured considerably high around the urban parks. Results derived from analysis on spatio-temporal changes of land diversity demonstrated that a certain level of urban development exerted a positive effect on an increase in land diversity, but consistent urban development lowered a value of landscape diversity. Results derived from regression analysis to set forth the optimal urban space showed that an urban area of a space about $2km^2$ exerted a positive effect at a rate of about 0~43.3% and a negative effect at a rate about 43.3~100%. In conclusion, the results of this research are considered to provide important basic data for future urban and landscape planning. Nonetheless, as only the layout on the 2D plane was analyzed in this research, further research in future is required to complexly consider diverse factors such as height of structure and change in visible real area arising from geographical features.

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.19-35
• /
• 1997

The purpose of this study is to find out the characteristics of landform in Geoje-Do using GIS and DTED data. The characteristics of landform in Geoje-Do are as follows; First, the height-range of Geoje-Do is $0{\sim}580m$, and the average elevation of it is 124m. Volcanic and granite region is mainly appeared at high elevation-region. But, we can't find out outstanding difference of elevation, according to its geology. The second. the slope-range of Geoje-Do is $0{\sim}52$ degree, and the average slope of it is 17.6 degree. The slope of volcanic and granite area is more steeper than any other region. But the results of analysis of the geology in Geojo-Do, don't show outstanding difference of the slope. The third, the area-rate of the aspect of Geoje-Do is almost same in all direction. And the area-rate of south-west direction is the highest. According to the geology of Geoje-Do, granite is distributed the most widely, and the area of volcanic and granite occupy 60% of entire island's area. According to analysis of influence of geology with elevation, geology has little relationship with elevation. According to analysis of geology and drainage network, streams are inclined to be developed well in Alluvium area. Drainage network is well developed throughout the entire island, except southeast area. The highest order of stream is 4 in 1:25,000 topographic map. The density of stream in Geoje-Do is very high, such as 1.6. The bifurcation-ratio of stream is also higher than 4 in all order. The length-ratio of stream is ranged from 1.24 to 3.25. According to the relationship between order and elevation. order is the greater, elevation is the lower. According to the relationship between order and slope, order is the greater, slope is the gentler. In this study, we use DTED Data, and compare it with topographic map data. According to the comparison, there is a little difference between DTED data and topographic map data. Therefore, to use DTED data in landform analysis, it is required coordinate matching process. This process is very important, and take very long time. Thus, if you use DTED in landform analysis, some processes are required. DTED data can be taken very easily, but its using is not simple. Because coordinate adjust is very hard work.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.445-454
• /
• 2009

Localized unprecedented torrential rain and heavy rainfall cause repeated damages and make it difficult to detect and predict the landslide caused by heavy rainfall. To analyze the landslide characteristics of Inje area this study used satellite images photographed after the occurrence of landslide caused by the typhoon Ewiniar occurred in July, 2006, and for GIS analysis purpose, interpreted the satellite images (SPOT5) visually to digitize into developing parts, water traveling parts and sediment parts. For analysis of spatial characteristics, landslide areas obtained from visual interpretation of digital map, 3rd & 4th forest vegetation maps and detailed soil map and grids were overlaid and analyzed. As a result, in regard to topographic features, landslide occurred at places, of which average slope is $26.34^{\circ}$, had south, south-east, south-west aspects and average altitude of 627m. From hydrological analysis, it was found out that water traveling area rapidly spread approaching water traveling area and sediment area. From forest type analysis, it was found out that landslide occurrence was high in pine woods, and in terms of girth class attribute, landslide occurred in small-sized woods, in which the crown occupancy of trees that have the diameter at breast height, 6~16cm, was greater than 50%. From the analysis of soil series, landslide areas constitute 37.85% of OdF and 37.35% of SmF, which had sandy loam soil and excellent drainage capacity. Through this study, landslides in Inje area were characterized and SPOT5 images of 2.5m resolution could be used. But there was a difficulty in determining water traveling parts adjacent to urban area.

• Korean Journal of Remote Sensing
• /
• v.16 no.3
• /
• pp.221-233
• /
• 2000

An intertidal topography is continuously changed due to morphodynamics processes. Detection and measurement of topographic change for a tidal flat is important to make an integrated coastal area management plan as well as to carry out sedimentologic study. The objective of this study is to generate intertidal DEM using leveling data and waterlines extracted from optical and microwave remotely sensed data in a relatively short period. Waterline is defined as the border line between exposed tidal flat and water body. The contour of the terrain height in tidal flat is equivalent to the waterline. One can utilize satellite images to generate intertidal DEM over large areas. Extraction of the waterline in a SAR image is a difficult task to perform partly because of the presence of speckle and partly because of similarity between the signal returned from the sea surface and that from the exposed tidal flat surface or land. Waterlines in SAR intensity and coherence map can effectively be extracted with MSP-RoA edge detector. From multiple images obtained over a range of tide elevation, it is possible to build up a set of heighted waterline within intertidal zone, and then a gridded DEM can be interpolated. We have tested the proposed method over the Gomso Bay, and succeeded in generating intertidal DEM with relatively high accuracy.

• The Korean Journal of Applied Statistics
• /
• v.35 no.3
• /
• pp.407-419
• /
• 2022

The semiconductor fabrication process is complex and time-consuming. There are sometimes errors in the process, which results in defective die on the wafer bin map (WBM). We can detect the faulty WBM by finding some patterns caused by dies. When one manually seeks the failure on WBM, it takes a long time due to the enormous number of WBMs. We suggest a two-step approach to discover the probable pattern on the WBMs in this paper. The first step is to separate the normal WBMs from the defective WBMs. We adapt a hierarchical clustering for de-noising, which nicely performs this work by wisely tuning the number of minimum points and the cutting height. Once declared as a faulty WBM, then it moves to the next step. In the second step, we classify the patterns among the defective WBMs. For this purpose, we extract features from the WBM. Then machine learning algorithm classifies the pattern. We use a real WBM data set (WM-811K) released by Taiwan semiconductor manufacturing company.