• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.1
• /
• pp.10-17
• /
• 2020

Objectives: This study was performed to evaluate the total dust, size-selective dust, and heavy metal concentrations generated inside and outside toll booths on an expressway and to identify the source through analysis of the components of the deposited dust. Methods: A total of 32 samples were collected from eight expressway toll booths. Each total dust sample was collected using a 37 mm PVC filter attached to a personal air sampler. Heavy metal samples were collected according to NIOSH method 7300. The size-selective dust concentrations were identified using a DustMate, and deposited dust was analyzed by WD-XRF and UHR-FE-SEM. Results: The geometric mean concentrations of the total dust inside and outside the toll booths were 337.5 ㎍/㎥ and 342.7 ㎍/㎥, respectively. The overall concentrations of TSP, PM₁₀, PM_2.5, and PM1 were higher on the outside of the toll booths, as the particle size of dust was larger, and higher in the underground passage as the dust size was smaller. The real-time analysis of the dust concentrations of TSP, PM₁₀, PM_2.5, and PM1 revealed to be higher at morning and evening times than other times because of heavy traffic. The element components of deposited dust in the toll booth were related to natural sources rather than artificial sources. Among the chemical components in the deposited dust analyzed by WD-XRF, SiO₂ was the highest. For the elements analyzed by UHR-FE-SEM, C was the highest, followed by O, and Si. Conclusions: In order to reduce the dust concentrations around toll booths on an expressway, it is necessary to periodically clean surrounding areas such as underground passages, and it is also necessary to remove deposited dust inside the toll booth from time to time.

• The Journal of Natural Sciences
• /
• v.5 no.2
• /
• pp.19-24
• /
• 1992

To find out the extent of air pollution in Taejon city, we investigated the concents of heavy metals in barks of trees in principal roadside, the outer block of a roadside and Pomunsan Park. Among the road-side trees in these areas, Platanus orientalis, Ginkgo biloba and Liriodendron tulipifera have been chosen. And we analyzed the relationship between the content of heavy metal of the barks and the traffic volume expressed by cars passing through for an hour. The range of contents of the lead in barks of the trees in the roadside and Pomunsan Park were respectively 2-1109 ppm and 5-11 ppm. Generally the contents of lead of barks of the trees in roadside was much higher than that in Pomunsan Park. And there has been positive correlation between the traf-fic volume and the content of lead in the barks. The more cars passing through for an hour, the higher the maximum in contents of lead in the barks of roadside trees. By the way the contents of cadmium in barks of the roadside trees was slightly higher than that in Pomunsan Park and was little variable.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.73-81
• /
• 2005

Triangle-shaped island was been used for the exclusive separation between the right-turn and the through flow. However, in case that existing Triangle-Shaped Island is built at the intersection of narrow road. there are more possibilities of traffic collision trespassing into the opposite lane. Accordingly, separation of the opposite lane is required so as to prevent the intrusion of the large-sized (a heavy) vehicle into the opposite lane turning at the intersection. This study showed the comparison between intersection composed of existing Triangle-Shaped Island and the intersection with Drop Island is added. First of all, in the safety aspect, a method to decide location and shape of Drop Island considering turning trajectory of the large-sized (the heavy vehicle) is addressed. The guideline on the placement of drop island install location and method to decide form the consider heavy truck's turn trajectory in safety side. As a conclusion. we analyzed that drop island is relatively superior to existing Triangle-Shaped Island in terms of driver, ease of driving, driving pleasantness, pedestrian, widening and economic performance aspect.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.633-644
• /
• 1999

Gully pot is a part of urban darainage system to butter the runoff water fluxes from road to rivers and to minimize environmental pollution by prevending over the surrounding area. A series of studies have been carried out concerning the physicochemical characteristics of the sewage sludge sediments sttling down in such a gully pot in order to over to evaluate the contamination for heavy metals such as pb, Zn, Cu and Cd. The roadside soil and sewage sludge samples from gully pots were characterized by XRD analyses and sequential extraction : Zn 2595.7$\mu$g/g; Cd9.8$\mu$/g; Cu602.5$\mu$g/g; Pb260.0$\mu$g/g),because of a long-term accumulation of vehicle- and industrial-related pollutants. Mean Zn concentration in Yeouido (3873$\mu$g/g) and Junggu(3262$\mu$g/g)areas are 4-5 times higher than those in Dobonggu area, suggesting that Zn may be derived from automobile traffic (including the rubber of automobile tires). The mean concentrations of Cu and Cr are very significantly high in Junggu and Gurogu areas, possibly due to the industrial activities in these areas. The low Pb levels throughtotut the whole study areas in Seoul can be accounted for the use of unleaded gasoline since 1987. Sequential extraction experiments illustrate that a major part of Zn is bound to FII and FIII, representing about 88% of the total Zn concentration. Fraction IV, related to orgnic matter, is mostly significant for Cu accounting for 60% of the total Cu, and FII is next in importance. The main carriers of Pb are the fractions III, II and FIV, and in that order. The behavior of Cd is quite different from other elements (Zn, Cu, Pb), and most of the Cd is associated with FV. Changes in the physicochemical environments (such as acidification) may result in severe environmental pollution of surface water and rivers with respect to heavy metals (especially Zn and Cu).

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.49-56
• /
• 2016

PURPOSES : In this study, noise reduction effect of a two-layer porous asphalt pavement was investigated through site measurement and computer simulation. METHODS : To examine noise reduction effect, a 3 km long quiet pavement was installed by removing previous normal pavement, which had a rather low porosity. The studied site was a high-rise apartment building surrounded by the quiet pavement and Seoul ring road with heavy traffic volume, indicating relatively high background noise. RESULTS : The measurement result before and after installing the quiet pavement showed a noise reduction effect of 4.3 dB(A) at a distance of 7.5 m from the road. After validating the accuracy of simulation using SoundPLAN, the reduction in SPL(sound pressure level) at the facades by the quiet pavement was predicted by considering five different road conditions generating traffic noise from each road or in the combination of the quiet pavement and Seoul ring road. In the case of no noise from Seoul ring road, noise reduction at the facades was 4.2 dB(A) on average for 702 housing units. With background noise from Seoul ring road, however, the average SPL decreased to 2.0 dB(A). Regarding subjective response of noise, the number of housing units with a noise reduction of over 3 dB(A) was 229 out of 706 units (approximately 32%). For 77 housing units, the noise reduction was between 1~3 dB(A), while it was less than 1 dB(A) for 400 housing units. CONCLUSIONS : The overall result indicates that the quiet pavement is useful to reduce noise evenly at low and high floors compared to noise barriers, especially in the urban situation where background noise is low.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1194-1201
• /
• 2003

Measurements of network traffic have shown that self-similarity is a ubiquitous phenomenon spanning across diverse network environments. We have advance the framework of multiple time scale congestion control and show its effectiveness at enhancing performance for fast TCP prototype control. In this paper, we extend the fast TCP prototype control framework to window-based congestion control, in particular, TCP. This is performed by interfacing TCP with a large time scale control module which adjusts the aggressiveness of bandwidth consumption behavior exhibited by TCP as a function of "large time scale" network state. i.e., conformation that exceeds the horizon of the feedback loop as determined by RTT. Performance evaluation of fast TCP prototype is facilitated by a simulation bench-mark environment which is based on physical modeling of self-similar traffic. We explicate out methodology for discerning and evaluating the impact of changes in transport protocols in the protocol stack under self-similar traffic conditions. We discuss issues arising in comparative performance evaluation under heavy-tailed workload. workload.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.815-820
• /
• 2004

For providing high quality-guaranteed service over Internet, traffic engineering based on an MPLS technology is being introduced. MPLS traffic engineering performs the computation on the path guaranteeing service`s quality and the reservation on network resources by an MPLS signaling protocol. As one of MPLS signaling protocol, RSVP-TE protocol transmits and receives periodic refresh messages for maintaining the path of a traffic flow. Such characteristic gives a heavy processing overhead to routers for maintaining states of large number of paths. In this paper, we propose a scalable implementation approach for RSVP-TE without dramatically increasing processing overhead. And we eval-uate the processing overhead on periodic messages by implementing the RSVP-TE protocol and the reduction mechanism of periodic messages.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.147-154
• /
• 2004

The purpose of this paper is to improve the existing phase split algorithm considering the minimum green time in COSMOS. In the case of a signalized intersection where two wide and narrow streets intersect each other, the time required for the pedestrian crossing is frequently longer than the time alloted to the through traffic on a minor street. In order to meet the minimum green time requirement for the pedestrian less time in alloted automatically to the left-turn traffic, creating heavy congestion on the left-turn approach. To solve this problem, this study suggests a new algorithm which shares the barrier using minimum green time and shares the burden with signal phases alloted to the crossing street traffic on the basis of the equal ratio of the degree of saturation, while maintaining the minimum green time requirement. The new algorithm was compared with the existing algorithm by using a microscopic simulation model for COSMOS evaluation developed at Ajou University. The simulation results show that the new algorithm produces better performance than the existing one.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.203-209
• /
• 2014

Today, Distributed denial of service (DDoS) attack present a very serious threat to the stability of the internet. The DDoS attack, which is consuming all of the computing or communication resources necessary for the service, is known very difficult to protect. The DDoS attack usually transmits heavy traffic data to networks or servers and they cannot handle the normal service requests because of running out of resources. It is very hard to prevent the DDoS attack. Therefore, an intrusion detection system on large network is need to efficient real-time detection. In this paper, we propose the detection mechanism using analysis of flow information against DDoS attacks in order to guarantee the transmission of normal traffic and prevent the flood of abnormal traffic. The OPNET simulation results show that our ideas can provide enough services in DDoS attack.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.1
• /
• pp.94-104
• /
• 2012

The purpose of this research is to quantify the compliance of on-road emission from a light duty diesel vehicle, based on a comparison to emission regulation standard. $NO_x$, CO and THC emissions were measured using a portable device on a selected real-world driving route with a length of approximately 22 km. On-road measurements were repeated by 10 times on a same route to reflect variability in traffic conditions. A test route was divided into 22 road links with length of 1 km to analyze emission results with higher spatial resolution. The average emissions of $NO_x$, CO and THC over total travel distance, which is approximately 220 km, were quantified to be in compliance with emission regulation standards. Under higher spatial resolution, $NO_x$ concentration exceeded a standard in 92 links out of 220 links. The extended time in stop period and the stop-and-go driving cycle were identified as two important reasons for increased $NO_x$ emissions in observed cases. Heavy traffics showed higher $NO_x$ emissions than free flow. These results indicate that the real-world vehicle emissions might exceed the compliance level associate with traffic conditions. Another interesting observation of this research is that the on-road emission characteristics can be independent to the average speed of road links with higher spatial resolution. Variability in on-road emission might not be fully described by solely relying on an average speed, because variability in traffic conditions and road conditions can influence on real-world vehicle emissions.