• 한국환경보건학회지
• /
• 제18권1호
• /
• pp.1-5
• /
• 1992

A study was performed to measure the heavy metal concentrations of suspended particles in iron castings during February, 1990. The heavy metal concentrations were analyzed using patricles atomic absorption spectrophotometer. The results were as fellows 1. The concentrations of suspended paticles by casting process were at furnace 4.19mg/m$^{3}$ at pouring 2.93mg/m$^{3}$ at nonferrous furnace 3.90mg/m$^{3}$, at molding 1.17mg/m$^{3}$, jung ja 2.23mg/m$^{3}$, desanding 5.42mg/m$^{3}$, sand treatment 4.82mg/m$^{3}$, finishing 1,20mg/m$^{3}$. 2. Among the total of 8 iron casting workplaces, the concentrations Fe of furnace was 0.36mg/m$^{3}$, Cu of nonferrous furnace 0.02mg/m$^{3}$, Pb of pouring 0.02mg/m$^{3}$, Cr of desanding 0.01mg/m$^{3}$ and Mn of furnace 0.03mg/m$^{3}$.

• 생태와환경
• /
• 제43권3호
• /
• pp.377-384
• /
• 2010

안동호와 임하호에 서식하고 있고 누치(H. labeo)의 부위(아가미, 신장, 뼈, 비늘, 근육)에 따른 각 조직 내 중금속(Al, As, Cr, Cd, Hg, Pb, Cu, Fe, Mn, Zn) 함량을 측정하여 양호의 서식환경에 따른 누치의 부위별 중금속 축적량을 알아보고자 하였다. 안동호와 임하호에 서식하는 누치의 중금속 함량은 안동호에서 높았으며, As, Cd과 Hg은 함량의 차이가 컸다. Al, As와 Fe의 함량은 모두 아가미 조직에서 가장 높았고 근육 조직에서 가장 낮았으며, Zn 함량은 조사된 모든 부위에서 거의 동일한 수준을 보였다. 또한 Al, Cr, Cu와 Mn 함량은 임하호에 서식하는 누치에서 보다는 안동호에 서식하는 누치의 아가미와 신장 조직에서 높게 나타났다. 본 연구의 결과 안동호에 서식하는 누치가 임하호에 서식하는 누치보다 중금속 함량이 높았으며, 이는 안동호의 수질과 저니에서 중금속 함량이 높은 것으로 보아 수환경의 수질과 저니에 포함된 유기물을 어류가 먹이로 섭취함으로써 어류에서도 높은 함량을 보인 것으로 생각된다.

• 한국물환경학회지
• /
• 제18권4호
• /
• pp.341-354
• /
• 2002

Heavy metal concentration/distribution in sediments and bivalves from the tidal flats in Saemankeum coastal area, western Korea, were investigated, Among 6 sampling sites, S2, S5 and S6 showed the higher levels of Zn, Cr, Ni, Cu and Cd contamination and S1 did the higher level of Pb contamination than other sites, while S-4 showed the lowest levels of these metal contamination. Overally, the levels of Zn, Cu and Pb concentrations in Sinonovacula constricta were estimated to be relatively high. The shell lengths of the collected mussels were linearly related to their dry weights of the whole soft parts, but the mussels collected from S3 were in a poor nutrition, resulting in the distinctively high levels of metal concentrations in the body. It was shown that in S. constricta, Cr, Ni, Cu and Zn are distributed equally into the whole soft parts or a little more into the flesh, after absorption, while Fe, Cd, Pb and Mn are transferred more into the non-flesh parts than into the flesh parts. In S. constricta, the heavy metal concentrations in the flesh increase with those in the whole soft parts. The bioaccumulation factors(heavy metal concentration in S. constricta/heavy metal concentration in sediment) showed that, of the examined metals, Cd is the most cumulative in the body of S. constricta, followed by Zn and Cu, while Mn, Cr, Ni and Pb are not cumulative.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.397-400
• /
• 2007

For mapping the distribution of heavy metals in the mining area, field spectroscopy and hyperspectral remote sensing were used in this study. Although heavy metals are spectrally featureless from the visible to the short wave infrared range, possible variations in spectral signal due to heavy metals bound onto minerals can be explained with the metal binding reaction onto the mineral surface. Variations in the spectral absorption shapes of lattice OH and oxygen on the mineral surface due to the combination of heavy metals were surveyed over the range from 420 to 2400 nm. Spectral parameters such as peak ratio and peak area were derived and statistically linked to metal concentration levels in the streambed samples collected from the dry stream channels. The spatial relationships between spectral parameters and concentrations of heavy metals were yielded as well. Based on the observation at a ground level for the relationship between spectral signal and metal concentration levels, the spectral parameters were classified in a hyperspectral image and the spatial distribution patterns of classified pixels were compared with the product of analysis at the ground level. The degree of similarity between ground dataset and image dataset was statistically validated. These techniques are expected to support assessment of dispersion of heavy metal contamination and decision on optimal sampling point.

• 한국식품과학회지
• /
• 제26권6호
• /
• pp.745-749
• /
• 1994

녹차음료가 음용수나 식품에 오염된 중금속의 장내흡수 및 체내 축적 억제와 같은 생리적 기능이 있는지를 조사하기 위해 동물실험을 실시하였다. 쥐에게 3주간 수질기준의 5,000배와 500배 수준으로 납과 카드뮴을 오염시킨 음료수를 부여했을 때 식이섭취량과 체중증가량은 카드뮴 고농도 부여군을 제외한 모든 군에서 중금속 투여로 인한 유의적 차이를 나타내지 않았다. 표적장기의 무게는 신장과 대퇴골에서 중금속 투여에 의한 유의적 차이를 나타냈으며 녹차 투여로 인한 장기무게에는 영향을 나타내지 않았다. 표적장기의 중금속 함량에 있어서는 녹차 음용에 의한 장기의 축적억제 효과를 나타냈는데 특히 대퇴골에서 납은 $25{\sim}45%$, 카드뮴은 고농도 투여군에서 42%의 뚜렷한 감소효과를 보였다. 대퇴골의 칼슘함량은 중금속 투여로 크게 낮아졌으나 녹차 투여 군에서는 그 함량이 증가하였으므로 녹차 투여로 중금속의 축적이 방해되어 칼슘흡수가 증가했음을 확인할수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.89.2-89.2
• /
• 2010

The dye-sensitized solar cell (DSSC) is a device for the conversion of visible light into electricity, based on the sensitization of wide bandgap semiconductors. The performance of the cell mainly depends on a dye used as sensitizer. The absorption spectrum of the dye and the anchorage of the dye to the surface of $TiO_2$ are important parameters determining the efficiency of the cell. Generally, transition metal coordination compounds(ruthenium polypyridyl complexes) are used as the effective sensitizers, due to their intense charge-transfer absorption in the whole visible range and highly efficient metal-to ligand charge transfer. However, ruthenium polypyridyl complexes contain a heavy metal, which is undesirable from point of view of the environmental aspects. Moreover, the process to synthesize the complexes is complicated and costly. Alternatively, organic dyes can be used for the same purpose with an acceptable efficiency. The advantages of organic dyes include their availability and low cost. We designed and synthesized a series of organic sensitizers containing long wavelength absorption-chromophores for the dye sensitized solar cell. The DSSC composed of Blue-chromophores for the sensitization absorbed long wavelength region which is different also applied into the dye-cocktail (mixing) system. The photovoltaic property of DSSCs organic long wavelength absorption-chromophores were measured and evaluated by comparison with that of individual chromophores.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.118.1-118.1
• /
• 2011

The dye-sensitized solar cell (DSSC) is a device for the conversion of visible light into electricity, based on the sensitization of wide bandgap semiconductors. The performance of the cell mainly depends on a dye used as sensitizer. The absorption spectrum of the dye and the anchorage of the dye to the surface of TiO2 are important parameters determining the efficiency of the cell. Generally, transition metal coordination compounds(ruthenium polypyridyl complexes) are used as the effective sensitizers, due to their intense charge-transfer absorption in the whole visible range and highly efficient metal-to ligand charge transfer. However, ruthenium polypyridyl complexes contain a heavy metal, which is undesirable from point of view of the environmental aspects. Moreover, the process to synthesize the complexes is complicated and costly. Alternatively, organic dyes can be used for the same purpose with an acceptable efficiency. The advantages of organic dyes include their availability and low cost. We designed and synthesized a series of organic sensitizers containing long wavelength absorption-chromophores for the dye sensitized solar cell. The DSSC composed of Blue-chromophores for the sensitization absorbed long wavelength region which is different also applied into the dye-cocktail (mixing) system. The photovoltaic property of DSSCs organic long wavelength absorption-chromophores were measured and evaluated by comparison with that of individual chromophores.

• 한국환경보건학회지
• /
• 제10권1호
• /
• pp.33-45
• /
• 1984

In order to investigate the pollution of heavy metal in soil, chinese cabbage and radish collected from Singal interchange (highway area), Anyang stream, Jungryang stream (stream basin) and Chunchun dong, Suweon (non-polluted area), this study was carried out from July to October in 1983. The contents of cadmium, copper, lead, and zinc were determined by atomic absorption spectrqphotometry. Generally in soil, the contents of heavy metals in highway area were lower than that in Anyang stream and Jungryang stream, but higher than that in non-polluted area. (Chunchun dong, Suweon). The vegetable samples of highway area were more polluted compared with that of Chunchun dong, Suweon. The contents of heavy metals in radish were higher than that of chinese cabbage and radish leaves were more polluted than roots.

• 한국식품영양학회지
• /
• 제15권1호
• /
• pp.64-69
• /
• 2002

To know a degree of pollution in agricultural products cultivated around 4 unworked mines located in Chollanam-Do, we investigated a concentration of heavy metal and trace metal to provide the basic data for its residual limits. 28 samples of seven kinds of agricultural products(lettuce, onion, potato, radish, pepper, pumpkin, bean) collected from 4 unworked mines located in Chollanam-Do in 2001 were analyzed by Mercury Analyzer for mercury and Atomic Absorption spectrophotometer for Pb, As, Cd, Cu, Mn, and Zn. Hg contents were detected N.D. ∼trace level(0.01 ppm and less) and As content were detected N.D. ∼ 0.029 lpm but most of same)leE were not detected. Cd contents were detected N.D∼0.124 ppm. The results of Hg, As, Pb and Cd content showed that for all the 7 species of agricultural products studied, none have accumulated levels dangerous enough to Pose health problems. The average contents of Cu were 3.070 ∼ 7.825 ppm in bean, the Mn were 3.688 ∼23.935 ppm in lettuce ailed the Zn were 5.690 ∼21.171 ppm in bean, respectively.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.231-238
• /
• 1984

Heavy metal fluoride glasses exhibit considerable promise as high transparency materials from the UV to the IR. These glasses are prepared by fusion of the mixture of metal fulorides($ZrF_4$, $BaF_2$, $LaF_3$ etc) at 800-1, 00$0^{\circ}C$ under the inert$(N_2)$ or reactive ($CCl_4$, $Cl_2$) atmosphere following the casting into glass on cooling. Infrared absorption at the 3, 400 cm-1 -OH peak has been measured as a function of thickness for several ZrF-$BaF_2$-LaF and $HfF_4$-$BaF_2$-$LaF_3$ glasses to separate contributions from bulk and surface -OH. For glasses melted under $CCl_4$ reactive atmosphere the peak is due almost entirely to surface-OH. and melting in a closed reactor was best for removing -OH. In ambient atmosphere the -OH peak exhibited no time dependence over a 30 d period indicating a very small rate of surface attack by atmospheric H2O. Removal of -OH absorption processing was generally easier and more complete for the $BaF_2$/ThF4-glasses than for the $ZrF_4$-or $HfF_4$-based glasses.