• Title/Summary/Keyword: heating temperature and time

Search Result 1,377, Processing Time 0.03 seconds

Weed Control in Herb Field by Means of Physical Treatments I.Weed Occurrence in Herb Field and Effect of $H_2SO_4$ and Heating on the Germination of Weed Seeds. (더덕 및 참취포장에서의 물리적인 방법을 이용한 잡초방제 I. 더덕 및 참취포장에서의 주요잡초 분포양상 및 잡초종자발아에 미치는 황산 및 열처리효과)

  • 강화석
    • Korean Journal of Plant Resources
    • /
    • v.10 no.2
    • /
    • pp.169-174
    • /
    • 1997
  • This study was conducted to obtain basic information needed to develop the effective weed control method by using thermal weeder which uses LPG as fuel. For survey of weed distribution in herb field, weed species were investigated at two kinds of herb field of Codonopsis lanveolata and Aster scaber located in Hoengseongkun and Hwacheonkun, Kangwondo. In Codonopsis lanveolata field, Digitaria sanguinalis and Persicaria viridis L were dominated. In Aster scaber field, Digitaria sanguinalis and Erigeron canadensis were dominated. In general, Grasses weeds in herb were more dominated than other broadleaf and Cyperaceae weeds. The treatments of $H_2SO_4$ in weed seeds were more effective for germination of several weeds, compared with that nontreated weed seeds. However, the rate of germination differed depending on weed species and tereatment time of $H_2SO_4. Also, viability of weed seeds was significantly affected by irradiation time and temperature. As the temterature and treatment time of irradiation increased, the rate of germination was decreased.

  • PDF

The Direct Dissolution of Ion-Exchange Resin by Fenton's Reagent (펜톤시약을 이용한 이온교환수지의 직접분해)

  • Kim, Kil-Jeong;Shon, Jong-Sik;Ryu, Woo-Seog
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.5 no.1
    • /
    • pp.85-90
    • /
    • 2007
  • Fenton's Reagent is applied to directly dissolve the cation-exchange resin, IRN-77. The characteristics of the experimental procedure is to dry the resin first and $FeSO_4$ solution is completely absorbed into the resin, and then $H_2O_2$ is introduced later for an effective reaction between the reagents within the resin. An a characteristic of the dissolution, the lag time is needed for about 1 hour until the main reaction is occurred, which was more affected with the less concentration of $FeSO_4$ and the less initial dose of $H_2O_2$. The dose of $H_2O_2$ was equally divided into the early stage and the later stage after the initial reaction to provide an effective and safe reaction condition. The optimum conditions is appeared that the concentration of $FeSO_4$ is 0.9M and the dose of 15% $H_2O_2$ solution is 6-7 volume for the dissolution of unit weight of IRN-77. The effect of the heating on the lag time was checked and the time could be reduced within 5 minutes at $50^{\circ}C$, which is a relatively low temperature. The large amount of the resin, 5g and 10g, was also completely decomposed by increasing the dose of $H_2O_2$ to 9-10 volume ratio.

  • PDF

Risk Assessment Technique for Gas Fuel Supply System of Combined Cycle Power Plants (I) : Based on API RBI Procedures (복합화력발전의 가스연료 공급계통에 대한 위험도 평가 기법 연구 (I) : API RBI 절차에 기반한 위험도 평가)

  • Song, Jung Soo;Yu, Jong Min;Han, Seung Youn;Choi, Jeong Woo;Yoon, Kee Bong
    • Journal of Energy Engineering
    • /
    • v.27 no.2
    • /
    • pp.1-13
    • /
    • 2018
  • The proportion of natural gas-fueled power generation is expanding due to the change of domestic energy policy pursuing reduction of dust and increasing clean energy consumption. Natural gas fuels used for the combined-cycle power plants and the district-heating power plants are operated at high temperature and high pressure in the fuel supply system. Accidents due to leakage of the gas such as fire and explosion should be prevented by applying risk management techniques. In this study, risk assessment was performed on the natural gas fuel supply system of a combined power plant based on the API RP 581 RBI code. For the application of the API RBI code, lines and segments of the evaluation target system were identified. Operational data and input information were analyzed for the calculations of probability of failure and consequence of failure. The results of the risk assessment were analyzed over time from the initial installation time. In the code-based evaluation, the gas fuel supply system was mainly affected by thinning, external damage, and mechanical fatigue damage mechanisms. As the operating time passes, the risk is expected to increase due to the external damage caused by the CUI(Corrosion Under Insulation).

Temporal Variation of Winter Indoor PM2.5 Concentrations in Dwellings in Ger Town of Ulaanbaatar, Mongolia (몽골 울란바토르시 게르촌 주택의 겨울철 실내 초미세먼지(PM2.5) 농도의 시간적 변이)

  • Lee, Boram;Jang, Yelim;Lee, Jiyoung;Kim, Yoonjee;Ha, Hunsung;Lee, Wooseok;Choe, Wooseok;Kim, Kyusung;Woo, Cheolwoon;Ochir, Chimedsuren;Lee, Kiyoung
    • Journal of Environmental Health Sciences
    • /
    • v.44 no.1
    • /
    • pp.98-105
    • /
    • 2018
  • Objectives: In Mongolian housing, they use coal as a fuel for indoor heating and cooking. The combustion of coal releases particulate matter, which can affect indoor air quality. The purpose of this study was to analyze the concentrations of indoor $PM_{2.5}$ in winter time dwellings in ger town. Methods: In this study, indoor $PM_{2.5}$ concentrations, temperature and humidity in houses were measured by a real-time PM monitor, while the time activity patterns of the residents were also observed. Results: The correlation between factors that may affect the indoor air quality was analyzed.The indoor $PM_{2.5}$ concentrations were $178.4{\pm}152.7{\mu}g/m^3$ (n=37). Five types of indoor $PM_{2.5}$ concentrations have been classified, which were associated with indoor activity. The stove type, fuel types and indoor activities such as cleaning, cooking and opening the stoves were not significantly associated with indoor $PM_{2.5}$ levels. Conclusions: Further study is needed to determine the effect of stove type through 24hours of indoor air quality monitoring.

Dehydration of Foamed Fish(Sardine)-Starch Paste by Microwave Heating 2. Quality Stability and Shelf-life of the Product (어육(정어러) 발포건조제품가공에 관한 연구 2. 제품저장중의 품질변화와 저장기간)

  • LEE Kang-Ho;LEE Byeong-Ho;SONG Dong-Suck;You Byeong-Jin;LEE Byeong-Ho;SUH Jae-Soo;JEA YOi-Guan;RYU Hong-Soo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.15 no.4
    • /
    • pp.291-297
    • /
    • 1982
  • In this part of the studies on dielectric dehydration of foamed fish-starch paste, qualify stability and shelf-life of the product of which the preparation formula and processing conditions were described in previous report (Lee et al, 1982) were determined by means of accelerated reaction test. The product was stored for 50 days under the conditions of temperatures at 35, 45, and $55^{\circ}C$ in steady state and various water activities of 0.44, 0.52, 0.65, and 0.75, respectively. The loss of available lysine, extent of TBA value, and development of browning during the storage were measured and reaction kinetically analysed to assess quality stability and shelf-life of the product for the storage at room temperature of $25^{\circ}C$. Extent of browning was accelerated with the increase of water activity and temperature marking the time to reach a limit of color and flavor deterioration, or to reach brown color density of 0.17 O.D./g at 420 nm, 106 days at aw=0.44, $35^{\circ}C$, and 41 days at aw=0,65, $55^{\circ}C$, These reaction rates resulted in a prediction of shelf-life, 130 to 110 days in the storage at aw=0.44 to 0.75, $25^{\circ}C$. The quality limit assessed by TBA values and sensory evaluation of rancidity was 87 days at aw=0.44, $35^{\circ}C$, and 30 days at aw=0.75, $55^{\circ}C$ which gave a predicted shelf-life, 128 to 113 days . at aw=0.44 to 0.75, $25^{\circ}C$ storage.

  • PDF

The Production and Properties of Pretense by Serratia sp. 2000-1 Isolated from Clinical Specimes (임상검체에서 분리된 Serratia sp. 2000-1에 의한 Pretense의 생산 및 효소학적 성질)

  • 김태전;김승곤;김상택
    • Biomedical Science Letters
    • /
    • v.6 no.3
    • /
    • pp.209-221
    • /
    • 2000
  • The purpose of this study was to investigate the practical availability of pretense production that can be used at home after isolating Serratia sp.2000-1 which produced extracellular pretense from clinical specimen. Basic production conditions and partial enzymatic characteristics of pretense produced by Serratia sp. 2000-1 was as follows: The kind and concentration of carbohydrate, nitrogen and metal salts for optimal enzyme production condition were each identified as the concentration of 1.5% glucose, 2.0% CSP, and 0.1% CaCl$_2$, and the optimal temperature, time and initial pH for culture were each 3$0^{\circ}C$, 72 hours, and pH 8.0. The final enzymatic yeild that was purified by 3 steps with ammonium sulfate precipitation (45~80%), DEAE-cellulose column chromatography, and Sephadex G-200 gel chromatography was 14.4%, and enzyme inactivity rate increased approximately 291314s. The optimal temperature and pH for purified pretense activity were 35$^{\circ}C$ and pH 7.0~8.0, and purified pretense activity was relatively stable by 4$0^{\circ}C$ at pH 6~10 for 30 min, however heating at 6$0^{\circ}C$ for 30 min, it liminated detectable pretense activity. The pretense activity was activated by $Mg^{2+}$, $Ba^{2+}$, $Ca^{2+}$, Mn$^{2+}$, but inactiviaed by Hg$^{2+}$, Ag$^{2+}$, Cu$^{2+}$, and the pretense activity was inhibited strongly by SDS among enzyme activity inhibitors. Further study is required to evaluate the practical availability of pretense production that can be used at home by isolating Serratia sp. from more clinical specimen and examining pretense more in details.

  • PDF

Weed and Pest Control by Means of Physical Treatments;Effect of infrared irradiation on loam for weed control (물리적인 방법을 이용한 잡초 및 병해충 방제 방법의 개발;적외선 조사에 의한 잡초방제를 위한 양토의 가열 효과)

  • Kang, Whoa-Seug;Yu, Chang-Yeon;Shin, Hyun-Dong;Kang, Wie-Soo;Oh, Jae-Heun
    • Korean Journal of Environmental Agriculture
    • /
    • v.15 no.1
    • /
    • pp.91-104
    • /
    • 1996
  • The viability loss or death of weed seeds buried in soil can be induced by infrared irradiation which has good penetration in moist soil. By using this principle of pre-emergence soil-treatment, the study was carried out to obtain basic information needed to develop the effective weed control method for the production of less polluted agricultural products. An apparatus for irradiating infrared was constructed by using ceramic material with high emissivity. The LPG was used as fuel for producing infrared by heating ceramic material. The soil heated in this study was loam with four levels of moisture contents (0.6, 5.7, 10.7, 15.1 % wb). The temperature distribution was measured at various soil depths when soil with different moisture content was irradiated with infrared for three different times (30, 60, 90 sec). The soil depths with duration time of minimum 3 minutes over $80^{\circ}C$, temperature inducing viability loss of weed seeds, were investigated. When the moisture content of soil was 0.6 and 5.7 % wb, the soil depths which can induce viability loss of weed seeds was greatly increased with increasing irradiation time. However, any depths of soil tested in this study was not reached to the temperature of $80^{\circ}C$ when 30 seconds of irradiation time was applied on soil with moisture content of 10.7 or 15.1 % wb. Generally, the soil depth needed for viability loss of weed seeds was decreased with increasing moisture content of soil. Also, longer irradiation time was required to induce viability loss of weed seeds with increasing moisture content of soil.

  • PDF

An Experimental Study on the Improvement of Insulation Performance in Old University Buildings and Economic Evaluation (노후화된 대학 건물의 단열성능 향상 실험 및 경제성 평가)

  • Lee, Jeongmin;So, Wonho;Cho, Kyungchan;Choi, Dongnyeok;Lee, Kwon-yeong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.8
    • /
    • pp.287-297
    • /
    • 2020
  • This study examined ways of improving the internal insulation performance of aging university buildings, and to enhance the convenience of occupants in university buildings and the insulation effect of aging buildings. This research was conducted to solve the problem of continuous requests for improving the insulation performance of office workers in the Nehemiah Hall building of Handong University. The results showed that the internal temperature of Nehemiah Hall was low compared to the internal temperature of the adjacent building. Considering the characteristics of the building, the university chose insulating materials under the theme of internal insulation. The experiment was conducted by installing internal wall insulation used in the market by producing a model room that miniaturized the university professor's office. Based on the experimental results, an economic evaluation was conducted to analyze the insulation effect by measuring the heating time and actual heat transmission coefficient. An economic evaluation was conducted by experiment and theory and on a winter and summer basis. According to the research, when an Isopink (30 T) was introduced as an internal insulation material in 60 offices of Nehemiah Hall, it could save up to 1,071,600 won in total during the winter season and 109,200 won during the summer season.

Hydrochar Production from Kenaf via Hydrothermal Carbonization: Effect of Process Conditions on Hydrochar Characterization (열수탄화를 통해 kenaf로부터 hydrochar생산과 공정 조건에 따른 hydrochar 특성에 끼치는 영향)

  • Youn, Hee Sun;Um, Byung Hwan
    • Applied Chemistry for Engineering
    • /
    • v.33 no.1
    • /
    • pp.28-37
    • /
    • 2022
  • The lignite and bituminous coal are mainly used in thermal power plant. They exhaust green house gas (GHG) such as CO2, and become deplete, thus require alternative energy resources. To solve the problem, the hydrochar production from biomass is suggested. In this study, both hydrothermal carbonization (HTC) and solvothermal carbonization (STC) were used to produce high quality hydrochar. To improve the reactivity of water solvent process in HTC, STC process was conducted using ethanol solution. The experiments were carried out by varying the solid-liquid ratio (1:4, 1:8, 1:12), reaction temperature (150~300 ℃) and retention time (15~120 min) using kenaf. The characteristic of hydrochar was analyzed by EA, FT-IR, TGA and SEM. The carbon content of hydrochar increased up to 48.11%, while the volatile matter decreased up to 39.34%. Additionally, the fuel characteristic of hydrochar was enhanced by reaction temperature. The results showed that the kenaf converted to a fuel by HTC and STC process, which can be used as an alternative energy source of coal.

Feasibility Study on Packaged FBG Sensors for Debonding Monitoring of Composite Wind Turbine Blade (풍력발전기 복합재 블레이드의 접착 분리 모니터링을 위한 패키징 광섬유 브래그 격자 센서 탐촉자의 사용성 검토)

  • Kwon, Il-Bum;Choi, Ki-Sun;Kim, Geun-Jin;Kim, Dong-Jin;Huh, Yong-Hak;Yoon, Dong-Jin
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.31 no.4
    • /
    • pp.382-390
    • /
    • 2011
  • Smart sensors embedable in composite wind turbine blades have been required to be researched for monitoring the health status of large wind turbine blades during real-time operation. In this research, the feasibility of packaged FBG sensor probes was studied through the experiments of composite blade trailing edge specimens in order to detect cracking and debonding damages. The instants of cracking and debonding generated in the shear web were confirmed by rapid changes of the wavelength shifts from the bare FBG sensor probes. Packaged FBG sensor probes were proposed to remove the fragile property of bare FBG sensor probes attached on composite wind blade specimens. Strain and temperature sensitivity of fabricated probes installed on the skin of blade specimen were almost equal to those of a bare FBG sensor. Strain sensitivity was measured to be ${\mu}{\varepsilon}$/pm in a strain range from to 0 to 600 ${\mu}{\varepsilon}$, and the calculated temperature sensitivity was to be 48 pm/$^{\circ}C$ in the heating test up to 80 degree.