• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.386-391
• /
• 2009

To verify the possibility of manufacturing a germinated rough rice tea, germinated rough rice was roasted at 200, 220, and $250^{\circ}C$ for 10, 20, and 30 min. The treated rice powder was then put into tea bags and leached for 1, 3, and 5 min, after which their antioxidant, physicochemical, and sensory characteristics were compared. The total polyphenol content and 2,2'-Azino-bis-(3-ethyl benzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activities of the germinated rough rice tea increased as the roasting temperature increased as well as in response to increased roasting and leaching times. Furthermore, the greater the roasting temperature, roasting time, and leaching time, the greater the increase in total soluble solid contents. Moreover, the turbidity and browning index of the germinated rice tea rose as the roasting temperature, roasting time, and leaching time increased. Additionally, the pH tended to decrease as the roasting temperature, roasting time, and leaching time increased. Evaluation of the sensory characteristics of the germinated rice tea revealed that the formation of a Maillard reaction product in the course of heating the rice added a unique flavor, which led to increase preference for the color, flavor, and taste, and therefore, the overall preference.

• Journal of the Korean Ceramic Society
• /
• v.18 no.1
• /
• pp.27-34
• /
• 1981

The phase separation of low-alkali borosilicate glass with the composition of $6.25Na_2O$.$18.75B_2O_3$.$75.00SiO_2$(mole%) substituting $Li_2O$ for $Na_2O$ was studied. The phase separation in the temperature range of transformation was examined with various heating temperatures and soaking times. Durability to water, thermal expansion and specific density of the specimen were investigated and the microstructure of the separated phase was also observed by transmission electron micrograph techniques. The maximum alkali extraction result with the best phase separation effect was obtained when $Na_2O$ of the base glass was replaced with $1.88Li_2O$ (mole %) and electron micrograph of carbon film replica of $1.88Li_2O$$4.37Na_2O$.$18.75B_2O_3$.$75.00SiO_2$ (mole %) glass showed that the glass consisted of homogeneous two phases. The minimum specific density was shown with the specimen treated at 57$0^{\circ}C$ and it was also shown that the longer the treating time the lower the specific density. The apparent activation energies of approximately 45 kcal/mole by the alkali extraction and 43kcal/mole by the thermal expansion method were derived from the Arrhenius plots, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.506-509
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using thin plastic substrates. The LC aligning capabilities and pretilt angle of the thin plastic substrates by in-situ photoalignment method were better than that of the glass substrate by general photoalignment. Also, the LC pretilt angle increased with increasing heating temperature and exposure time. And EO characteristics of photoaligned TN-LCDs using in-situ photodissociation method on glass substrate and on plastic substrate are also excellent.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.90-93
• /
• 2002

The sintering process of BSCCO 2223 tapes is a complex process that is very sensitive to parameters, such as temperature, oxygen partial pressure, heating and cooling rate and holding time. During the first heat treatment, 2212 phase of precursor powder is partially transformed into 2223 phase and some residual secondary phases, such as $(Bi,Pb)_2$$Sr_2$CuO／sub y／(2201), $(Ca,Sr)_2$CuO／sub y／(2/1AEC), (Ca,Sr)／sub 14／Cu／sub 24／O／sub 41／(14／24 AEC) etc. The secondary phases are difficult to be removed from the BSCCO 2223 matrix on the heat treatment. These secondary phases degrade the critical current density. In order to minimize the amount and size of alkaline earth cuprate(AEC) particles step heat treatment is applied during the first heat treatment under the varying atmosphere. Experimental results showed that by adapting the step heat treatment process, the amount and particle size of the secondary phases in the final tapes are decreased. Consequently, the BSCCO 2223grain texture and Jc properties are improved.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.245-247
• /
• 2017

A turbine wheel undergoes high heat flux and centrifugal force when a gas turbine starts. The temperature and stress of the turbine wheel increase rapidly, and the time point and rate of them may not coincident. The difference of heating and rotating rates influences the life of turbine wheel. We conducted thermo-mechanical fatigue analysis with finite element methods to study the influence. The low acceleration and deceleration of the wheel extends the life. If the turbine wheel decelerate faster than cooling, the life increases.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.10
• /
• pp.1363-1370
• /
• 1997

Single liquid droplet combustion processes including heating, evaporation, droplet burning and flame radiation were theoretically investigated by adopting nongray gas radiation model for the radiative transfer equation (RTE). n-Heptane was chosen as a fuel and the numerical results were compared with the experimental data available in the literature. The discrete ordinate method (DOM) was employed to solve the radiative transfer equation and the weighted sum of gray gases model (WSGGM) was applied to account for nongray effect by CO$_{2}$, and H$_{2}$0. Therefore, detailed effects by nongray gas and its comparison with the gray gas model could be figured out in the results. It is found that the radiative heat flux is higher when the nongray model is used, thereby reducing the maximum gas temperature and the flame thickness, but the total burning time increases due to the deceased conductive heat flux in nongray model. Consequently, a better agreement with experimental data could be obtained by using nongray model.

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.357-362
• /
• 2002

A bacterial strain showing the fibrinolytic activity was screened from korean traditional soybean products. For the identification, the strain was investigated morphology and biochemical characteristics and it was classified to Bacillus subtilis. The strain had high fibrinolytic activity in Chungkukjang. The optimum fermentation condition of temperature and time were 37$^{\circ}C$ and 24hour. The pH in Chungkukjang was gradually alkalized during fermentation. The fibrinolytic enzyme in Chungkukjang stable at heft treatment; After heating at 6$0^{\circ}C$ and 8$0^{\circ}C$ for 30 min, the fibrinolytic activity remained 75% and 40%, respectively.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.74-83
• /
• 2020

In Korea, about 110,000 LPG small storage tanks of less than three tons have been installed in restaurants, houses and factories, and are used as LPG supply facilities for cooking, heating and industrial use. In the case of combustible liquefied gas storage tanks, the tank may rupture due to the temperature increase of the tank steel plate (approximately 600℃) even when the safety valve is operating normally, causing large-scale damage in an instant. Therefore, in the event of a fire near the LPG small storage tank, it is necessary to accurately predict the timing of the BLEVE(Boiling Liquid Expanding Vapour Explosion) outbreak in order to secure golden time for lifesaving and safely carry out fire extinguishing activities. In this study, we have first investigated the results of a prior study on the prediction of the occurrence of BLEVE in the horizontal tanks. And we have developed thermodynamic models and simulation program on the prediction of BLEVE that can be applied to vertical tanks used in Korea, have studied the effects of the safety valve's ability to vent, heat flux strength of external fires, size of tanks, and gas remaining in tanks on the time of BLEVE occurrence and have suggested future utilization measures.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.535-539
• /
• 2001

To establish the cultural practices of persimmon in heated plastic house, the growth and flower bud differentiation of 4-year old 'Nishimurawase' persimmon tree planted in 80 L pots were investigated. Temperature was kept at above $18^{\circ}C$. The earlier heating induced the earlier flower bud differentiation, while the number of days from bud burst to flower bud differentiation was 70-75 days, which was not affected by the date of heating. The date of flower bud differentiation in 'Nishimurawase' persimmon was May 1, May 21, and June 1 in the plastic house heated from Jan. 15, Feb. 15, and Mar. 15, respectively. The number of flower primordia per bud in the plastic house was 6.2-7.1, slightly fewer than that of 7.8 in the open-field, with the tendency of increasing the number by earlier heating. The days required for the differentiation of the last flower bud primordia from the beginning of differentiation of the first bud were 40-60, and that required for the flower bud differentiation of all buds on the same shoot was 30. The total carbohydrates in shoot increased and the contents of nitrogen decreased, resulting in increased C/N ratio just before flower bud differentiation, and it coincided with the time when the total carbohydates increased above 15%. During two weeks before flower bud differentiaton, The contents of zeatin per 1 g dry matter of shoot drastically increased from $27.2{\mu}g$ to $47.3{\mu}g$, while that of IAA slightly decreased from $188.6{\mu}g$ to $172.4{\mu}g$, and that of GA decreased from $2,225{\mu}g$ to $1,555{\mu}g$.

• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.36-42
• /
• 2006

In this report, we demonstrate a comprehensive analysis of the effects of Au addition on the microstructure and magnetic properties of $Fe_{73.5}Si_{13.5}B_{9}Nb_{3}Au_1$ Finemet-type alloy. It was found that the as-quenched alloys were the amorphous state and turned into nanocrystalline state under heat treatments. The DSC analysis indicates that the sharply exothermal peak corresponding to the crystallization of the $\alpha-Fe(Si)$ was observed at $547-579^{\circ}C$ depending on the heating rates, which is little higher than that of original Finemet (542-$570{^{\circ}C}$, respectively). Besides, the thermomagnetic result confirmed that the full substitution of Cu by Au with the single phase structure in the M(T) curve along cooling cycle. Ultrasoft magnetic properties of the nanocrystallized samples were significantly enhanced by the proper annealing such as the increase of permeability and the decrease of the coercivity. The optimum annealing condition was found at the annealing temperature of $540^{\circ}C$ and the increase of the annealing time up to 90 min.