• Journal of the Korean Society of School Health
• /
• v.10 no.2
• /
• pp.213-239
• /
• 1997

In recent years, adolescent issues including smoking, drinking, drug abuse, juvenile delinquency, deviant sexual behavior, mental health problems, high suicide rate, misconducts and absence without due notice, etc are emerging as serious social problems and the debate on these controversial issues is heating up. Accordingly, the purpose of this study is to analyze factors which are changeable and fixable among the factors influencing the adolescent's health behavior and misconducts and, eventually influencing factors which can be used as the basis to establish health policies and health promotion program to reduce the health risk behavior and misconducts of adolescents. The smoking rates are 34.1% for male students of prep schools and 13.8% for females students of the same school and 55.7% for males, 31.8% for females of the vocational schools and 58.3% for males and 48.8% for females of social institutional schools, which showed the great diffence among the different types of schools and between sex. In particular, male students of social institutional school showed 1.7 times higher smoking rate than those of prep schools and in case of female students, 3.5 times higher rate. The time of initial smoking was most frequently during the middle school days for both males and females. In case of drug abuse, 5.4% of males and 2.7% females of general schools were using adhesives and inhalants which was 2.5 times higher for males and 6.3 times higher for females of social institutional schools. 41.8% of males and 30.3% of females of prep schools, 41.8% of males and 59.4% of females of vocational schools and 55.1% of males and 36.6% of females of social institutional schools have experienced kissing. Regarding the health promoting behavior and misconducts, female students practiced the health promoting behavior more than male students while male students showed higher rate of health risk behavior and misconducts than female students, which was statistically significant. The group of students who have not attended the health education class, in comparison to those who have attended, were more likely to practice health risk behavior and misconducts. Those with higher academic achievement was more likely to practice the health promoting behavior while those with poor academic achievement were more likely to practice health risk behavior and misconducts. As the perceived health status was higher and as students experienced less illness, the health promoting behavior was higher.

• Applied Biological Chemistry
• /
• v.40 no.6
• /
• pp.484-489
• /
• 1997

The characteristics of growth and esterase activity of bacterial strains isolated from acid hydrolysed soybean protein were examined. All the isolated strains having decomposition activity of p-hydroxybenzoic acid butyl ester and esterase producing activity were identified as Bacillus sp. by morphological and biochemical methods. The specific growth rates, esterase activities and p-hydroxybenzoic acid butyl ester decomposition activities of isolated strains were $0.844{\sim}1.213\;h^{-1}$, $21{\sim}222\;mU/ml$ and $5.4{\sim}8.1\;mU/ml$, respectively. In the fermentation of Bacillus sp. KB8 strain which had the highest esterase producing activity, growth, extracellular excretion and intracellular synthesis of esterase were inhibited by adding NaCl in the culture broth. Esterase producing activity gradually increased after late exponential growth phase, until maximum value of 420 mU/ml reached after 64 hours culture period. Esterase of Bacillus sp. KB8 strain was stable up to $50^{\circ}C$ for 30 minutes, but was inactivated by heating for 30 minutes at $70^{\circ}C$. The enzyme activity exponentially decreased during the incubation time at the temperatures of $60^{\circ}C$ and $65^{\circ}C$.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1273-1279
• /
• 2016

Production of iodine-131 by neutron activation of tellurium in tellurium dioxide ($TeO_2$) material requires a target that meets the safety requirements. In a radiopharmaceutical production unit, a new lid for a can was designed, which permits tight sealing of the target by using tungsten inert gaswelding. The leakage rate of all prepared targets was assessed using a helium mass spectrometer. The accepted leakage rate is ${\leq}10^{-4}mbr.L/s$, according to the approved safety report related to iodine-131 production in the TRIGA Mark II research reactor (TRIGA: Training, Research, Isotopes, General Atomics). To confirm the resistance of the new design to the irradiation conditions in the TRIGA Mark II research reactor's central thimble, a study of heat effect on the sealed targets for 7 hours in an oven was conducted and the leakage rates were evaluated. The results show that the tightness of the targets is ensured up to $600^{\circ}C$ with the appearance of deformations on lids beyond $450^{\circ}C$. The study of heat transfer through the target was conducted by adopting a one-dimensional approximation, under consideration of the three transfer modes-convection, conduction, and radiation. The quantities of heat generated by gamma and neutron heating were calculated by a validated computational model for the neutronic simulation of the TRIGA Mark II research reactor using the Monte Carlo N-Particle transport code. Using the heat transfer equations according to the three modes of heat transfer, the thermal study of I-131 production by irradiation of the target in the central thimble showed that the temperatures of materials do not exceed the corresponding melting points. To validate this new design, several targets have been irradiated in the central thimble according to a preplanned irradiation program, going from4 hours of irradiation at a power level of 0.5MWup to 35 hours (7 h/d for 5 days a week) at 1.5MW. The results showthat the irradiated targets are tight because no iodine-131 was released in the atmosphere of the reactor building and in the reactor cooling water of the primary circuit.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.134-142
• /
• 1995

In order to elevate the efficiency of methane fermentation using the paper mill sludge, this experiment was conducted at two temperature conditions($35^{\circ}C$ and $60^{\circ}C$), and overlooked the addition effects of ethyl acetate as a substrate, nickel as a constituent of $F_430$, and sulfur as a cell growth factor and reductant. The cellulose of paper mill sludge was degraded to lower molecular materials by heating at $60^{\circ}C$ and NaOH treatment. Methane forming rates were 4.8% from NaOH-treated paper mill sludge added with ethyl acetate, 16.5% with sodium sulfide, 19.8% with nickel trioxide, 31.9% with mixture, and 9.6% with control at $60^{\circ}C$, but 0.21% with ethyl acetate, 2.14% with nickel acetate, 3.02% with nickel sulfate, 3.34% with nickel trioxide and 0.62% with control at $35^{\circ}C$. Therefore, methane yield was increased by approximately 10-fold at $60^{\circ}C$ than $35^{\circ}C$, and fermentation liquid added with mixture(nickel trioxide+ethyl acetate+sodium sulfide) at $60^{\circ}C$ showed the medium pH(7.0), higher COD value and lower nitrogen content.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.250-256
• /
• 2004

The objectives of this study were to develop a new commercial grain cooler suited to domestic weather and post-harvesting conditions for paddy, and to evaluate the performance. A prototype grain cooler capable of cooling paddy of 200 tons within 24 hours was developed. The grain cooler was designed to control the refrigeration capacity from 0 to 100% by controlling the capacity of compressor with unloading solenoid valve and by changing the flow rates of hot refrigerant gas flowing into reheater and evaporator from compressor. And a controller with one chip microprocessor was developed to control temperature and relative humidity of cooling air. The maximum cooling capacity of the grain cooler was 35,284㎉/hr at condensing/evaporating pressure of 16.5/3.6 kgf/$\textrm{cm}^2$. Maximum flow rate of cooling air was 120 ㎥/min at static pressure of 279 mmAq. The total maximum required power was 22.8㎾, and total required energy was saved from 26.7 to 33.3% of maximum power depending on operating conditions. The coefficient of performance of refrigeration devices and total coefficient of performance of the grain cooler were 4.71 and 1.8, respectively.

• Applied Biological Chemistry
• /
• v.28 no.2
• /
• pp.51-55
• /
• 1985

Dried black soybeans were soaked in water at the temperature range of $4^{\circ}C{\sim}100^{\circ}C$ and in salt or sugar solution at $100^{\circ}C$ in order to investigate their effects on the cooking ratio and diffusion property of color pigments. As the temperature increased, the equilibrated absorbance at 490nm of soaking water after 120min was linearly increased. The activation energy for diffusion of color pigments were found to be 4.23 Kcal/mole at the range of $60^{\circ}C{\sim}100^{\circ}C$ and 8.31 kca1/mo1e at $4^{\circ}C{\sim}60^{\circ}C$. The cooking ratio, % cooked beans after heating, of black soybeans were more affected by the salt concentration that of sugar. Both concentrations reduced the cooking ratio as they increased. The sorption isotherm of Kongjaban showed a quite different curves between the storage at $4^{\circ}C$ and $25^{\circ}C$. The sorption and desorption rates during storage could be represented by the equation of $log({\frac{dw}{dt}}{\times}10^3))=alogt+logb$ with a very high correlation.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.161-166
• /
• 2005

Glass formation, thermal property and crystallization behavior were investigated in $xK_2O-(33.3-x)BaO-16.7TiO_2-50SiO_2(mole\%)$ with fresnoite($Ba_2TiSi_2O_8$) crystal by replacement BaO for $K_2O$. As x(0$\le$x$\le$20) contents increased, glass formation became easy, and crystallization temperature moved on to the low temperature. Crystal phase of the $Ba_2TiSi_2O_8$ was confirmed by XRD, and the replaced x was not effected on the formation of new crystals. The kinetics of crystallization of fresnoite were studied by applying the DTA measurements carried out at different heating rates. The average avrami exponent(n) and activation energy were changed $2.26 {\pm}0.1,\;2.03 {\pm}0.1,\;1.93{\pm}0.15$, $279 {\pm}12kJ/mole,\;302{\pm}7kJ/ mole,\;319{\pm}1kJ/mole$ according to x contents, respectively. The replaced x improved the orientation of crystal growth.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.21 no.1
• /
• pp.31-46
• /
• 1993

A radiative transfer model with two-stream/delta-Eddington approximation has been developed to calculate the vertical distributions of atmospheric heating rates and radiative fluxes. The performance of the model has been evaluated by comparison with the results of ICRCCM (Intercomparison of radiative codes in climate models). It has been demonstrated that the presented model has a capability to calculate the solar radiation not only accurately but also economically. The characteristics of ultraviolet-B radiation (UV-B; 280-320nm) are examined by comparison of relation between the flux at the top of atmosphere and that at the surface. The relation of UV-B is quadratic due to the strong ozone absorption in this band. Also, the dependence of the UV-B radiation on the stratospheric ozone depletion and stratospheric aerosol haze due to volcanic eruption on the stratospheric ozone depletion and stratospheric aerosol haze due to volcanic eruption has been tested with various solar zenith angles. The surface UV-B increases as the solar zenith angle increases. The existence of stratospheric aerosols causes an increase in the planetary albedo due to the aerosols' backscattering. The planetary albedo with aerosol's effect has been increases as the solar zenith angle is not sensitive. It may be caused by the fact that the aerosols' scattering effect becomes saturated with the relatively long path length in a large solar zenith angle. Finally, the regional impact of stratospheric aerosols due to volcanic eruption on the intensity of UV-B radiation at the surface has been estimated. A direct effect is that the flux is diminished at the low latitudes, while it is enhanced in the high latitudes by the aerosols' photon trap or twilight effect. In the high latitudes, both aerosols' scattering and ozone absorption have strong and opposite impacts to the surface UV-B radiation is located at the mid-latitudes during spring season in both hemispheres.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.78-91
• /
• 2002

In the thermal power plant, there are six manipulated variables: main steam flow, feedwater flow, fuel flow, air flow, spray flow, and gas recirculation flow. There are five controlled variables: generator output, main steam pressure, main steam temperature, exhaust gas density, and reheater steam temperature. Therefore, the thermal power plant control system is a multinput and output system. In the control system, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, strict control of the steam temperature must be maintained to avoid thermal stress. Maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature versus changes in fuel flow rate, difficulty of control of the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, and the fluctuation of inner fluid water and steam flow rates during the load-following operation. Up to the present time, the Proportional-Integral-Derivative Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on the characteristic comparison of the PID controller and the modified 2-DOF PID Controller (Two-Degrees-Freedom Proportional-Integral-Derivative) on the DCS (Distributed Control System). The method is to design an optimal controller that can be operated on the thermal generating plant in Seoul, Korea. The modified 2-DOF PID controller is designed to enable parameters to fit into the thermal plant during disturbances. To attain an optimal control method, transfer function and operating data from start-up, running, and stop procedures of the thermal plant have been acquired. Through this research, the stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Also, this paper addressed whether an intelligent tuning method based on immune network algorithms can be used effectively in tuning these controllers.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.570-575
• /
• 2007

The thermal performance of the air receiver filled with porous material for 5kWt dish solar collector installed in Inha University, Korea, is experimentally investigated. The diameter of the parabolic dish is 3.2 m, and its focal length is 2 m. It consists of 10 small pieces of glasses which have their own curvatures, and the effective reflecting area is 5.9 m2. The reflectivity of the glass is 0.95, and the thermal capacity of the system is about 5 kW thermal. The aperture diameter of the cylindrical-shape receiver which is made of stainless steel is 100 mm, and the height is 210 mm. A quartz window is installed at the receiver aperture to minimize the convective heat loss and prevent air leakages. In order to increase the heat transfer area, porous material (nickel-alloy) is inserted into the receiver. Air flows into the upper part of the receiver, which is the opposite side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 3 exits which are located near the aperture. The volumetric flow rates of air are varied from 600 to 1200 L/min. The thermal efficiency of the receiver ranges from 82% - 92% depending upon the flow rate. The results show that the system efficiency and receiver efficiency increase as the volume flow rate increases as expected. These results from the experiment will be useful for the applications to air heating receivers and solar reactors.