• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.185-192
• /
• 1997

The combustion of cellulose insulation treated with Borax, Boric acid and Aluminum Sulfate as combustion retardants is examined by candle type combustion tester. The cellulose fibers in cellulose insulation are classified by diameter as less than 0.2mm, 0.2mm-0.5mm, 0.5mm-2mm and more than 2mm. The burning behavior of cellulose insulation are studied by LOI (Limit Oxygen Index: Beginning point of smoldering), L- point (Lower point of combustion transition from smoldering- flaming to flaming combustion), LOI, L-point and H-point rise with the increasing particle size of cellulose fibers because thermal decomposition rate of cellulose fiber decreases. The phenomena of combustion transition from smoldering to flaming combustion are determined by the generating rate of combustible gas and the formation rate of combustible gas mixture within the zone of cellulose fiber heated.

• 한국정밀공학회지
• /
• 제30권2호
• /
• pp.241-246
• /
• 2013

This paper reports fabrication and characterization of cellulose Electro-Active Paper (EAPap) with increased thickness. Usual thickness of cellulose EAPap was $15{\mu}m$. This thickness needs to be increased to enhance the mechanical force output of EAPap. To fabricate thick cellulose EAPap, the fabrication process parameters including casting and drying processes should be investigated. In this paper, the casting thickness is increased from $800{\mu}m$ to $1500{\mu}m$, and heating times on a hot plate before and after curing process are introduced at 40 and $60^{\circ}C$ for 30 and 60 minutes, respectively. Thickness measurement, Thermal Gravitational Analysis (TGA), UV-transmittance, Young's modulus, and piezoelectric charge constant are measured. Heated EAPaps with increased thickness have similar TGA result, higher transmittance, higher Young's modulus and lower piezoelectric charge constant.

• Journal of the Korean Wood Science and Technology
• /
• 제33권6호통권134호
• /
• pp.63-70
• /
• 2005

$225^{\circ}C$에서 $325^{\circ}C$ 이하의 저온에서 열처리한 셀룰로오스의 물성과 에틸아민 흡착특성을 열처리온도별로 조사하였다. 열처리온도의 증가와 더불어 수율이 감소하고, 탄소함량이 증가하는 반면, 수소나 산소의 함량은 감소하였다. 표면관능기량을 Boehm 법으로 측정한 결과, 열처리온도가 $300^{\circ}C$까지 올라가면 산성관능기량이 증가하였으나 그 이상의 온도에서는 다소 감소하는 경향이 있었다. 염기성관능기는 거의 존재하지 않았으며 열처리온도 $325^{\circ}C$에서 미량 확인할 수 있을 정도였다. 열처리셀룰로오스를 1점법으로 측정한 비표면적은 처리온도가 높으면 다소 증가하는 경향이 있었으나 매우 적었다. 열처리 온도가 증가할수록 셀룰로오스의 에틸아민증기 흡착량이 증가하여 $300^{\circ}C$ 처리 셀룰로오스의 에틸아민흡착에 의한 중량증가가 최대 113%를 나타내었다. $275^{\circ}C$에서 열처리셀룰로오스는 에틸아민 흡착 시, 팽윤이 일어나고 용해현상이 일어났다. $275^{\circ}C$ 이상의 온도에서 열처리한 셀룰로오스는 X선회절도 상에서 무정형화 하는 것으로 나타났다. 에틸아민 흡착한 열처리셀룰로오스의 용해 현상은 셀룰로오스의 결정구조 붕괴와 염기성 가스의 흡착량 증가에 의한 것으로 추측된다.

• 한국안전학회지
• /
• 제5권1호
• /
• pp.7-18
• /
• 1990

This study measured the smouldering temperature of dust layer for various combustible natural polymer material by practical apparatus. The dust layer was either put on the preheated plate of constant temperature, or formed with cylinderical metal sleeve of various diameters and depths at room temperature and then heated up to a pre-determined smouldering temperature. Plots of arrival times versus smouldering temperature were made to compare the smouldering characteristics with kinds of dusts. The natural polymer material was divided into theree groups by characteristics of smouldering mechanism. This groups are cellulose group, lipide group and glucose group.

• 한국의상디자인학회지
• /
• 제9권2호
• /
• pp.85-92
• /
• 2007

This study focused on bean-juice treatment method which have dyeing property to indigo, yellow soil, sappan wood, cochineal and also on the possibility of applying to mordanting. This is different from the active mordanting using chemicals. Natural mordants with development of dyeing are not harmful, also are the medicines for disease. Limestone and ash neutralize the acidic soil. bean-juice protein adhere to cellulose surface and change the physical properties of protein so that coloring of dye is better than before and film non-soluble in water is made. Therefore the color made from bean-juice process lasts after washing. This study try to show one of the ways to improve the current method using the heavy metal which can have bad effects for environment and human being. Bean-juice(raw bean, heated bean) treatment method can be the way to fix the natural dyeing problem of bad dyeing. Bean-juice had been treated under various condition with pre-treatment, post-treatment and raw bean, heated bean. Following results are obtained in this study. In the case of Indigo dyeing, pre-treatment of heated bean shows the biggest difference of color. In the case of yellow soil dyeing, pre-treatment of raw bean-juice shows the biggest gap of color. Pre-treatment of heated bean in sappan wood dyeing case and post-treatment of raw bean show bigger color difference than pre-treatment of raw bean. In cochineal dyeing, raw bean pre-treatment shows the biggest color difference.

• 대한화학회지
• /
• 제42권2호
• /
• pp.190-196
• /
• 1998

셀룰로스시료를 치환체로 만들지 않고 분자량 및 분자량분포를 결정하기 위한 새로운 시료처리 및 크기배제크로마토그래피방법을 확립하였다. 먼저 셀룰로스시료를 N-methylmorpholine N-oxide (NMMO)에 녹인 후 dimethyl sulfoxide (DMSO)에 희석함으로써 50/50(w) NMMO/DMSO에 녹은 약 0.1%의 시료용액을 만들었다. 컬럼으로는 글루코오스를 입힌 polydivinylbenzene 겔을 채운 크기배제크로마토그래피용 컬럼을 이용하였으며 용리액으로는 0.05M의 LiBr와 2.5%의 바탕용액을 포함하는 DMSO를 이용하였다.유속은 1 mL/min로 일정하게 유지하였고, DMSO의 점도를 낮추기 위해 컬럼을 포함하는 전체 시스템을 80$^{\circ}C$ 로 유지하였다. 0.05M의 LiBr를 가함으로써 SEC바탕선의 표류를 방지할 수 있었고 2.5%의 바탕용액을 가함으로써 시료와 컬럼충진물질 사이의 상호작용을 감소시키는 효과를 얻었다. 좁은 분포를 가지는 pullulan표준물질로부터 얻은 컬럼보정곡선을 이용하여 두 개의 I 펄프시료와 두 개의 셀룰로스 스펀지 시료의 평균분자량을 결정함으로써 펄프로부터 스펀지를 만드는 서로 다른 두 가지 공정에서의 셀룰로스 분자들의 분해정도를 결정, 비교할 수 있었다.

• 한국균학회지
• /
• 제14권1호
• /
• pp.79-84
• /
• 1986

Ganoderma lucidum의 개체배양물(個體培養物)로 부터 얻은 cellulase를 ammonium sulfate fractionation으로 조정제(組精製)한 후(後) 이 효소(酵素)의 기본적(基本的)인 특성(特性)을 조사(調査)하였다. 이 효소(酵素)의 최적작용(最摘作用) pH와 온도(溫度)는 각각 pH $4.0{\sim}7.0$사이와 $50^{\circ}C$ 이하(以下)의 온도(溫度)에서는 비교적(比較的) 안정(安定)하였다. CMC-2Na분해(分解)에 대한 activation energy는 6.2 Kcal/mole이었다. $Mg^{++},\;Co^{++}$에 의해서 효소활성(酵素活性)이 증가(增加)되었으나 $Hg^{++}$에 의해서는 저해(沮害)되었다. 한편 본(本) 효소활성(酵素活性)은 SDS에 의해서 약 27%저해(沮害)된 것을 제외(除外)하고는 여러가지 chemical reagents에 의해서는 아무런 영향(影響)을 받지 않았다. 본(本) 효소(酵素)의 CMC-2Na에 대한 Km치(値)는 2.4 mg/ml였으며 CMC-2Na 이외(以外)에 천연(天然) cellulose에도 작용(作用)을 하였다.

• Food Science and Biotechnology
• /
• 제15권2호
• /
• pp.177-182
• /
• 2006

Polyphenol oxidase (PPO) was isolated from the flesh of Fuji apples by DEAE-Cellulose, ammonium sulfate precipitation, phenyl-Sepharose CL-4B, and Sephdex G-100 chromatography. The molecular mass of the purified PPO was estimated to be 40 kDa by SDS polyacrylamide gel electrophoresis. With regard to substrate specificity, maximum activity was achieved with chlorogenic acid as substrate, followed by catechin and catechol whereas, there was no detectable activity with hydroquinic acid, resorcinol, or tyrosine as substrate. The optimum pH and temperature with catechol as substrate were 6.5 and $35^{\circ}C$, respectively. The enzyme was most stable at pH 6.0 and unstable at acidic pH. The enzyme was stable when it was heated to $45^{\circ}C$ but heating at $50^{\circ}C$ for more than 30 min caused 50% loss of activity. Reduced $ZnSO_4$, L-cystein, epigallocatechin-3-o-gallate (EGCG), and gallocatechin gallate (GCG) also inhibited activity.

• 대한화학회지
• /
• 제8권4호
• /
• pp.164-168
• /
• 1964

"좀개구리밥"에서 histone 型 鹽基性 蛋白質을 單離하는데 처음으로 成功했다. 鹽基性 單白質은 "좀개구리밥"의 細胞磨碎物에서 稀 錦酸으로 抽出 分離하였다. 그 中 Amberlite CG-50에 (pH 6.0에서) 吸着되는 蛋白質成分은 송아지 胸腺 histone과 비슷한 amino 酸組成을 보였고, 構成 amino 酸 殘基로서는 lysine 이 特히 많았다. Carboxymethyl cellulose에 (pH 4.2에서) 吸着되는 蛋白成分의 溶出 chromatogram은 송아지 胸腺 histone과 비슷했으나, 各 peak의 比率은 相遠했으며, 特히 非吸着 成分이 含有되어 있음도 相違했다. 또 吸着成分의 amino 酸組成은 histone 型 鹽基成을 나타냈으나, 非吸着 成分은 典型的인 histone과는 相異한 蛋白質임을 確認했다. 송아지 胸腺 histone과 "좀개구리밥"에서 單離한 蛋白 成分들의 黃酸 存在下에서 $HgSO_4$와의 沈澱反應을 histone아닌 蛋白質과 比較 檢討한 結果, "좀개구리밥"에서 單離한 것은 histone 型 蛋白成分이 分明하였다.

• Journal of Plant Biotechnology
• /
• 제6권1호
• /
• pp.1-7
• /
• 2004

Forestry sector has witnessed some unprecedented events in the recent past both in terms of galloping biotechnological developments and heated environmental debates over risks associated with release of transgenic trees. Improvements in the in vitro propagation techniques has made it possible to develop tissue culture based plant regeneration protocols just for about any tree species. And with the inclusion of every new species within the realms of tissue culture technology, it becomes a candidate for genetic improvement through recombinant DNA technology, the so called genetic engineering. Poplars and their hybrids serve as the model tree species on which most of the genetic transformation work as been carried out. A lot of work has also gone in genetic transformation of fruit trees and trees of horticultural interests. Trees have been successfully transformed for traits ranging from reduction of length of juvenile phase to alteration of tree architecture to altering wood quality by lignin and cellulose modification. More-over trees have been genetically engineered successfully to combat various types of insect pests and pathogens causing diseases. But all these developments have ignited controversies over the possible benefits and risks associated with transgenic plantations by various environmental agencies and activists. Solutions to most of these concerns can be found out with more intensive prioritized research.