• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.185-192
• /
• 1997

The combustion of cellulose insulation treated with Borax, Boric acid and Aluminum Sulfate as combustion retardants is examined by candle type combustion tester. The cellulose fibers in cellulose insulation are classified by diameter as less than 0.2mm, 0.2mm-0.5mm, 0.5mm-2mm and more than 2mm. The burning behavior of cellulose insulation are studied by LOI (Limit Oxygen Index: Beginning point of smoldering), L- point (Lower point of combustion transition from smoldering- flaming to flaming combustion), LOI, L-point and H-point rise with the increasing particle size of cellulose fibers because thermal decomposition rate of cellulose fiber decreases. The phenomena of combustion transition from smoldering to flaming combustion are determined by the generating rate of combustible gas and the formation rate of combustible gas mixture within the zone of cellulose fiber heated.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.241-246
• /
• 2013

This paper reports fabrication and characterization of cellulose Electro-Active Paper (EAPap) with increased thickness. Usual thickness of cellulose EAPap was $15{\mu}m$. This thickness needs to be increased to enhance the mechanical force output of EAPap. To fabricate thick cellulose EAPap, the fabrication process parameters including casting and drying processes should be investigated. In this paper, the casting thickness is increased from $800{\mu}m$ to $1500{\mu}m$, and heating times on a hot plate before and after curing process are introduced at 40 and $60^{\circ}C$ for 30 and 60 minutes, respectively. Thickness measurement, Thermal Gravitational Analysis (TGA), UV-transmittance, Young's modulus, and piezoelectric charge constant are measured. Heated EAPaps with increased thickness have similar TGA result, higher transmittance, higher Young's modulus and lower piezoelectric charge constant.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.63-70
• /
• 2005

The purpose of this study was to investigate how to modify the physical properties of cellulose after thermal treatment. Cellulose was treated between $225^{\circ}C$ and $325^{\circ}C$ for 3 hrs under air flow, and then the thermally treated cellulose was measured to specific surface area, constitute elements, consumption ofacid and base, as well as the adsorption capacity of ethylamine vapor. The higher was the treating temperature from $225^{\circ}C$ to $325^{\circ}C$, the lower was the total yield of cellulose. Elemental analysis revealed that carbon content in thermally treated cellulose was gradually increased in proportion to temperature increment. The amount of acidic functional groups tended to increase up to $300^{\circ}C$, after then to be lowered slightly. In principle, no alkaline functional groups were found in thermally treated cellulose. In case of treatment with $325^{\circ}C$, only a few amount of alkaline functional groups were detectable. Specific surface area of thermally treated cellulose are determined to $1.9m^2/g$, which value can become higher when the treated temperature rises. The thermally treated cellulose at $275^{\circ}C$ shows the highest adsorption capacity of ethylamine at $40^{\circ}C$ for 4 hrs. Solubility of those two celluloses with WPG (Weight Percent Gain) value of 113% and 108%, respectively, was determined to almost 100%. X-ray diffractogram of thermally treated cellulose suggested that the crystalline structure of cellulose began to be destroyed at the temperature of $275^{\circ}C$. As a conclusion, changes of such a physical properties make it possible to weaken inter and/or intra hydrogen bond in crystal region of cellulose macromolecules. When thermally treated cellulose adsorbs ethylamine, it turns to be well soluble to water.

• Journal of the Korean Society of Safety
• /
• v.5 no.1
• /
• pp.7-18
• /
• 1990

This study measured the smouldering temperature of dust layer for various combustible natural polymer material by practical apparatus. The dust layer was either put on the preheated plate of constant temperature, or formed with cylinderical metal sleeve of various diameters and depths at room temperature and then heated up to a pre-determined smouldering temperature. Plots of arrival times versus smouldering temperature were made to compare the smouldering characteristics with kinds of dusts. The natural polymer material was divided into theree groups by characteristics of smouldering mechanism. This groups are cellulose group, lipide group and glucose group.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.2
• /
• pp.85-92
• /
• 2007

This study focused on bean-juice treatment method which have dyeing property to indigo, yellow soil, sappan wood, cochineal and also on the possibility of applying to mordanting. This is different from the active mordanting using chemicals. Natural mordants with development of dyeing are not harmful, also are the medicines for disease. Limestone and ash neutralize the acidic soil. bean-juice protein adhere to cellulose surface and change the physical properties of protein so that coloring of dye is better than before and film non-soluble in water is made. Therefore the color made from bean-juice process lasts after washing. This study try to show one of the ways to improve the current method using the heavy metal which can have bad effects for environment and human being. Bean-juice(raw bean, heated bean) treatment method can be the way to fix the natural dyeing problem of bad dyeing. Bean-juice had been treated under various condition with pre-treatment, post-treatment and raw bean, heated bean. Following results are obtained in this study. In the case of Indigo dyeing, pre-treatment of heated bean shows the biggest difference of color. In the case of yellow soil dyeing, pre-treatment of raw bean-juice shows the biggest gap of color. Pre-treatment of heated bean in sappan wood dyeing case and post-treatment of raw bean show bigger color difference than pre-treatment of raw bean. In cochineal dyeing, raw bean pre-treatment shows the biggest color difference.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.190-196
• /
• 1998

A new sampling and size exclusion chromatography (SEC) method for the analysis of underivatized cellulose are established. In this method, cellulose materials are first dissolved in N-methylmorpholine N-oxide (NMMO) and diluted by adding dimethyl sulfoxide (DMSO) to make the sample solutions of about 0.1% in 50/50 NMMO/DMSO (w/w). Sample solutions are analyzed using a glucose-treated divinylbenzene (DVB) SEC column and DMSO containing 0.05M LiBr and 2.5 blank as the eluant. The flow rate was constant at 1 mL/min and the whole SEC system including the column was heated at $80^{\circ}C$ to reduce the viscosity of DMSO. Addition of 0.05 M LiBr eliminated SEC baseline drifting, and addition of 2.5 blank seems to reduce the interaction between the sample and the column packing. SEC molecular weights were determined using a calibration curve constructed from a series of narrow pullulan standards, and they were used to measure the degree of degradation during two different pulp-to-sponge processings.

• The Korean Journal of Mycology
• /
• v.14 no.1
• /
• pp.79-84
• /
• 1986

A cellulose-degrading enzyme from Ganoderma lucidum was partially purified by ammonium sulfate precipitation and its enzymatic properties were studied. The enzyme had an optimum pH for activity at 4.0, and its stability range was pH $4.0{\sim}7.0$. The optimum temperature was $55^{circ}C$ and the enzyme retained 80% original activity after heated at $50^{\circ}C$ for 60 min. The activation energy of the enzyme for CMC degradation was caculated and found to be 6.2 Kcal/mole. The enzyme was activited by the addition of $Co^{++},\;Mn^{++}$, but slightly inactivated by $Hg^{++}$. Various enzyme inhibitors and chemical reagents did not affect the enzyme activity. The enzyme acted on native celluose as well as CMC. The Michaelis constant for CMC was calculated to be 2.4 mg glucose ep/ml.

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.177-182
• /
• 2006

Polyphenol oxidase (PPO) was isolated from the flesh of Fuji apples by DEAE-Cellulose, ammonium sulfate precipitation, phenyl-Sepharose CL-4B, and Sephdex G-100 chromatography. The molecular mass of the purified PPO was estimated to be 40 kDa by SDS polyacrylamide gel electrophoresis. With regard to substrate specificity, maximum activity was achieved with chlorogenic acid as substrate, followed by catechin and catechol whereas, there was no detectable activity with hydroquinic acid, resorcinol, or tyrosine as substrate. The optimum pH and temperature with catechol as substrate were 6.5 and $35^{\circ}C$, respectively. The enzyme was most stable at pH 6.0 and unstable at acidic pH. The enzyme was stable when it was heated to $45^{\circ}C$ but heating at $50^{\circ}C$ for more than 30 min caused 50% loss of activity. Reduced $ZnSO_4$, L-cystein, epigallocatechin-3-o-gallate (EGCG), and gallocatechin gallate (GCG) also inhibited activity.

• Journal of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.164-168
• /
• 1964

We isolated histone-type basic proteins from lemna paucicostata for the first time. Basic proteins were extracted directly with dilute mineral acids from homogenized lemna paucicostata. Amino acid compositions of basic protein portions adsorbed on Amberlite CG-50(at pH 6. 0) were resembled to those of calf thymus histones. Especially, lysine content was the greatest of the other amino acids. By chromatographic studies, adsorbed portions of basic protein components on carboxymethyl cellulose column(at pH 4. 2) were shown to be homogeneous to calf thymus histones, however, the area under the individual curve was different, and furthermore, the containing of a non-adsorbed portion in the large extent was markedly different from calf thymus histones. And amino acid compositions of adsorbed portions represented the histone-type basic propertes, but non-adsorbed portions were considered as a different protein compared with the typical histone. When calf thymus histone and protein components separated from lemna paucicostata were heated($60^{\circ}C$) with a solution of $HgSO_4-H_2SO_4$, precipitates were not obtained.

• Journal of Plant Biotechnology
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2004

Forestry sector has witnessed some unprecedented events in the recent past both in terms of galloping biotechnological developments and heated environmental debates over risks associated with release of transgenic trees. Improvements in the in vitro propagation techniques has made it possible to develop tissue culture based plant regeneration protocols just for about any tree species. And with the inclusion of every new species within the realms of tissue culture technology, it becomes a candidate for genetic improvement through recombinant DNA technology, the so called genetic engineering. Poplars and their hybrids serve as the model tree species on which most of the genetic transformation work as been carried out. A lot of work has also gone in genetic transformation of fruit trees and trees of horticultural interests. Trees have been successfully transformed for traits ranging from reduction of length of juvenile phase to alteration of tree architecture to altering wood quality by lignin and cellulose modification. More-over trees have been genetically engineered successfully to combat various types of insect pests and pathogens causing diseases. But all these developments have ignited controversies over the possible benefits and risks associated with transgenic plantations by various environmental agencies and activists. Solutions to most of these concerns can be found out with more intensive prioritized research.