• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1327-1332
• /
• 1998

The optimum thermal condition of retort Biji product was determined by heat penetration curve, aerobic bacteria count and sensory test. Retort Biji showed a simple logarithmic heating curve regardless of solid content. Heating time was a $26{\sim}27$ min until Fo value reached 9 min and the amount of microorganism in the Biji product sterilized for 26 min at $121^{\circ}C$ were decreased to $10^{-4}\;CFU/g$, indicating the safe range for retort product. The rate of heat penetration was reduced as solid content and size of product were increased, whereas sterilization temperature and initial temperature of product influenced the heat penetration curve. Sensory scare indicated that there was no significant difference in color, flavor, and appearance among different thermal processes. However, Biji product sterilized at $121^{\circ}C$ showed the highest score in overall preference value.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.3
• /
• pp.199-202
• /
• 2016

Processing methods of heat treatment in milk has been developed to increase safety for the consumer by destroying pathogens that may be found in milk. Commercial pasteurization of milk in the market started in the late 1800s in Europe and in the early 1900s in the United States. In 1962, it became a requirement in Korea that all milk for sale should be treated by heat. Nowadays, heat treatment (pasteurization or sterilization) became mandatory for all milk products sold in all over the world. However, since 1987, there was a big debate about the heat-treatment of milk. Korea Society of Dairy Science and Technology (KSDST) complied the 10 scientific articles of milk heat-treatment into the book which titled "Effects of the heat-treatment on the nutritional quality of milk". Almost several hundred copies had been distributed at the symposium KSDST in 1989. Currently, no one was able to find these articles in anywhere including library etc. Thus, author decided to re-write that books in serials because these articles should be pass on their knowledge of milk science to the next generation of milk research.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.1035-1041
• /
• 2000

Gamma irradiation was used to improve sanitation and quality of salted and fermented anchovy sauce. For commercial production, comparison with currently using sterilization methods, such as micro-filtration and heat treatment were also conducted. Control was prepared without irradiation and sterilization process. Microbiological, physiochemical, and sensory qualities were analyzed to observe the Quality changes during the storage. Irradiation at 5 kGy or above and micro-filtration process completely eliminated microorganisms detected in this study As irradiation dose increased, the color appeared brighter and irradiation at 5 kGy or above showed similar color L-value to that of sample treated with microfiltration. The color L, a, b-value of heat-treated sample always showed lower. The pH, salinity, and viscosity were sustained during storage. From the results of sensory evaluation, the samples treated with gamma irradiation and microfiltration obtained better scores than control or heat-sterilized. Gamma irradiation to salted and fermented anchovy sauce presented the best quality products among different sterilizing methods, especially at 5 kGy dose. Therefore, gamma irradiation can be successfully applied to commercial large scale production as a new sanitation technology with improved quality.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.50-56
• /
• 2007

FAO standard for heat sterilization of wood, International standards for phytosanitary measures (ISPM) No.15, must meet heat-treated wood core temperature to be higher than $56^{\circ}C$ and keep the temperature for more than 30 minutes. This study was carried out to analyze the heat treatment characteristics of domestic pinewood sterilized with the FAO standard. To enhance the effectiveness of heat treatment process in mountainous district energy consumption and time required to reach target temperature were evaluated at various temperature and relative humidity conditions and moisture contents of wood. Heat-treatment of high temperature and high humidity reduced the required heating time. Lower humidity levels at same temperature reduced energy consumption per unit time. However, lower humidity levels could not reduce total energy consumption greatly because longer treatment time was required at that condition. It is necessary to estimate energy consumption and predict treatment time in dynamic heating and cooling situations, because it frequently happens not to meet optimum treatment condition due to poor surrounding climates and operation performance of heat treatment facility in real field.

• Preventive Nutrition and Food Science
• /
• v.20 no.1
• /
• pp.60-66
• /
• 2015

The aim of this study was to determine the heat-penetration characteristics using stationary and rotary retorts to manufacture Kimchi soup. Both heat-penetration tests and computer simulation based on mathematical modeling were performed. The sterility was measured at five different positions in the pouch. The results revealed only a small deviation of $F_0$ among the different positions, and the rate of heat transfer was increased by rotation of the retort. The thermal processing of retort-pouched Kimchi soup was analyzed mathematically using a finite-element model, and optimum models for predicting the time course of the temperature and $F_0$ were developed. The mathematical models could accurately predict the actual heat penetration of retort-pouched Kimchi soup. The average deviation of the temperature between the experimental and mathematical predicted model was 2.46% ($R^2=0.975$). The changes in nodal temperature and $F_0$ caused by microbial inactivation in the finite-element model predicted using the NISA program were very similar to that of the experimental data of for the retorted Kimchi soup during sterilization with rotary retorts. The correlation coefficient between the simulation using the NISA program and the experimental data was very high, at 99%.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.5
• /
• pp.737-750
• /
• 2018

Effects of acid soaking (AS) and thermal sterilization (TS) on the shape and quality characteristics of Tteokbokki rice cake (TRC) were investigated. The F-value of a sequential process (SP) of the combination of AS and TS was quantitatively determined with a reference microorganism of Bacillus cereus. F-values were evaluated according to the minimum and the maximum D-value of B. cereus and the reduction exponent (m=12). The heat penetration curves at cold point (CP) of TRC (400 g) were used to estimate the TS time at 121, 100, and $95^{\circ}C$. F-values of the SP were revised according to the adjusted m values after AS at different pH. The non-uniformity parameters (NUP) of TRC had no significant changes during AS but it dramatically increased after applying TS at a low pH by AS. The result of solubilized starch contents (SSC) demonstrated that the shape changes during SP are related to SSC. The texture characteristics and the whiteness were significantly influenced by a low pH condition (3.5) (p<0.05). Sensory analysis showed that a lower pH and a longer thermal processing time influenced negatively on the acceptability. This study showed that pH 4.0 and $95^{\circ}C$ was an optimum condition for the SP.

• Journal of Biosystems Engineering
• /
• v.26 no.4
• /
• pp.391-398
• /
• 2001

A robot system for clone replication and gridding, which is a preliminary state of the genome research, was developed and evaluated its performance. This gridding robot system consisted of 1) a gridding heat that replicated the clone, 2) a manipulator, as a part of body of robot, which transferred the gridding head along x-, y-, z-axis, 3) a well plate arranging board, 4) a sterilization unit, and 5) a control unit. Performance of the system was evaluated with 1) repeatability of the robot system, 2) clone replication efficiency, 3) time requirement of the replication, and 4) sterilization efficiency. The repeatability error of the robot system showed 0.219 mm and 0.094 mm in the direction of x- and y-axis, respectively. The success rate of the clone replication with the gridding head was 100% on the membrane filter. The time required for the replication was four minutes and fifty-five seconds from the four 96 well plates to a 384 well plate meanwhile the required time with well experienced hand labor was three minutes thirty-five seconds. The gridding operation of clone could not be done by hand labor and the required time with robot system for the gridding on the membrance filter with the control program 5$\times$5: 1 copy and 384 gridding pins was twenty minutes and twenty-five seconds. The efficiency of the sterilization was considered to be satisfactory since no growth of fungi was found around the area of replication in the membrane filter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.607-610
• /
• 2003

Ozonic use of sterilization and heat treatment of raw material to extend the conservation period of food recently is increased by hard vegetable or microorganism sterilization purpose of fruit. If ozone can create as is easy comparatively because do air or oxygen by raw material and schedule period passes, there is advantage that do not leave the second contaminant because being gotten restored by oxygen. Also, because the effect is big to decolorization beside disinfection effect about microorganism, deodorization, disjointing of venomousness hazardous substance, food save, Indoor air purge, good hand processing, hydrospace agricultural chemicals processing etc. the use extent is wide. This research ran parallel a sterilization experiment of E.coli colitis germs by ozone that manufacture ozonizer that use doped diamond maund electrode (BDD) by boron and searched special quality electrochemistry enemy of the ozonizer and is created. After cultivate E.coli colitis germs during 37C 1 day is LB ship, after do ozonation, was sterilized more than 90% by ozone as result that examine disinfection effect by substance microscope and could confirm excellency of diamond electrode.

• Food Science and Industry
• /
• v.53 no.3
• /
• pp.284-294
• /
• 2020

High voltage pulsed electric field technology has been attracting attention in the the food industry as an eco-friendly nonthermal process technology using electrical energy. The lack of understanding of the equipment and the burden of equipment cost have not significantly increased the commercial application, but the potential as a technology to replace the heat process has been continuously increased. Sterilization of foods using the PEF process has been applied to liquid foods with low viscosity such as fruit and vegetable juices, but recently, high viscosity smoothies, high concentrate protein drink, mixed juice, and alcoholic beverages. Studies on sterilization of solid foods such as powders, raw meats are also being conducted. Also, the application of extraction and recovery of useful ingredients, activation of active compounds, pretreatment of drying, improvement of meat quality, changes of properties of starch has been studies.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.3
• /
• pp.223-229
• /
• 2015

Milk is a food with high nutritional value as it contains abundant water, proteins, vitamins, lactose, fat, minerals, enzymes, etc. However, in order to make milk suitable for intake, it should be thermally treated to eliminate microbiologically hazardous factors. Heat treatment is an essential sanitation process for milk, but various precautions must be taken in order to process and preserve it. Therefore, various techniques should be developed to minimize the nutrient loss and to ensure that milk is safe for consumption, conservation, and distribution. However, the existing thermal pasteurization methods are harmful and increase the nutrient loss; moreover, no new thermal pasteurization methods are being researched that are safe for the human health and minimize the nutrient loss. Hence, this study aims to review new processes for thermal (low temperatures) and no thermal pasteurization methods that can minimize the nutrient loss during milk pasteurization.