• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1711-1720
• /
• 2001

In this study, the heat transfer characteristics of a U-shape heat pipes were investigated. Heat is supplied to the U heat pipe through its middle zone(evaporator), and is released to the environment through its both arms(condensers). Both heat transfer coefficients and heat transport limitations were measured and compared with correlations previously developed for straight type heat pipes. Special concerns were focused to the cases, when each of condensers were submitted to a different cooling conditions, relatively. As a result. the heat transfer limitation of a U-shape heat pipe was found out to be 10∼15% less than the value for a straight heat pipe with an equivalent size.

• 한국환경과학회지
• /
• 제4권3호
• /
• pp.197-206
• /
• 1995

Surface heat balance of the northern sea of Cheju Island for summer in 1993 and 1994 is analyzed using the observation data obtained by Marine Research Institute, Cheju National University. Each flux elements at the sea surface is derived from the marine meteorological reports with application of an aerodynamical bulk method for the turbulent heat fluxes, and empirical formulae for the long-wave radiation heat fluxes. The flux divergence of oceanic heat transport and the rate of heat storage in the ocean are estimated as residual. The features of the surface heat balance are mainly decided by the solar radiation flux and the latent heat flux for 199B. But the Bowen Ratios were large for 1993. This means that the sensible heat fluxes were nearly equal to the latent heat fluxes for 1993. In this period, mean flux divergence of oceanic heat transport is about 130 W/$m^2$.

• 한국항공우주학회지
• /
• 제33권9호
• /
• pp.97-103
• /
• 2005

본 연구에서는 소형 동-소결윅 히트파이프를 대상으로 소결윅의 구조적 인자들이 히트파이프의 열수송 한계에 미치는 영향을 이론적으로 분석하였다. 소결윅의 입자 크기의 균일성과 소결 조건이 전체적인 기공분포와 기공률을 포함한 물리적 특성에 지배적인 요소로 작용했으며, 윅 두께 및 기공의 작은 편차가 히트파이프의 열수송 한계에 대체로 큰 영향을 미치는 것으로 나타났다. 특히, 증기온도와 경사각에 따라서 윅 두께와 평균 입자 반경, 그리고 모세관반경의 미세한 변화가 히트파이프의 모세관한계를 현저하게 변화시켰다.

• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.846-853
• /
• 2005

For the performance prediction of a planar-type solid oxide fuel cell, the computational analysis of transport phenomena with a simplified treatment of heat generation by the electrochemical reaction is conducted. From the result of the computational analysis, it is shown that the electrochemical reaction is closely related to the transport phenomena inside a solid oxide fuel cell. Transport phenomena including heat and mass transfer influences on the distribution of local current density and, as a result, on the performance characteristics of the fuel cell. Computational analysis is also extended to the parametric study to investigate the performance behavior of the fuel cell with different amount of supplied fuel flow rates. It is also demonstrated that the mathematical formulation and computational procedures proposed in this study can be applied to prove the importance of the specific TPB area in the manufacturing process of electrodes in solid oxide fuel cells.

• 한국해안·해양공학회논문집
• /
• 제20권1호
• /
• pp.62-72
• /
• 2008

본 연구에서는 흐름에 수직한 방향으로 급격한 수심 변화가 존재하는 해역에서 점열원에 의한 열오염 분포를 예측할 수 있는 해석 모델을 개발하였다. 개발된 모델을 이용하여 열오염 분포에 있어 수심 변화와 흐름효과를 검토하였다. 계산 결과 흐름에 수직한 방향으로 수심 변화가 존재할 경우 수평 확산 플럭스의 증감으로 인해 수심 변화 경계를 가로지르는 열의 이동이 증가하거나 감소하는 것으로 나타났다. 조류와 동시에 잔차류 성분을 포함할 경우에는 이류에 의한 열오염 수송 효과가 증가하여 수심 변화 경계를 가로지르는 수평 확산은 상대적으로 감소하였다.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.763-772
• /
• 1998

The effects of an inserted coil on flow patterns and heat transport performance for a horizontal rotating heat pipe have been studied experimentally. Especially, the present study is to see an internally inserted helical coil inside a RHP would lead to the same kind of results as internal fins. Visualization test conducted for an acryl tube, charged water with at a volumetric rate of 20%. When the flow kept pool regime at a low RPM(less than 1,000 RPM), the movement of coil forced the water to flow in axial direction. But this pumping effect of coil disappeared, when the pool regime changed to annular one which could be created by increasing RPM. The pumping effects for RHP with an inserted coil resulted enhancement both in condensation heat transfer coefficient and heat transport limitation, as obtained in case of using internal fins. But all these effects became negligible in the range of higher RPM(above 1,000∼1,200) with the transition of flow regime to annular flow.

• 전력전자학회논문지
• /
• 제9권3호
• /
• pp.203-212
• /
• 2004

히트파이프를 이용하는 전력반도체 냉각용 히트파이프가 장기간 사용에도 안정된 작동을 이루도록 하기 위해서는 제조 과정에서 발생할 수 있는 산화막 존재 등 문제 요인의 제거와 함께 시험을 통한 확인이 필요하다. 본 연구에서는 전력반도체 냉각용 히트파이프가 요구하는 여러 기하학적, 열적조건에 의해 결정되는 열수송 한계 및 특성과 안정된 작동을 확인하기 위한 시험방법을 제시하고 시험을 통하여 확인된 결과를 정리하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.111-120
• /
• 2006

The fully coupled conditional moment closure(CMC) model has been developed to realistically simulate the structure of complex turbulent nonpremixed syngas flame, in which the flame structure could be considerablyl influenced by the turbulence, transport history, and heat transfer as well. In order to correctly account for the transport effect, the CMC transport equations fully coupled with the flow and mixing fields are numerically solved. The present CMC approach has successfully demonstrated the capability to realistically predict the detailed structure and the overall combustion characteristics. The numerical results obtained in this study clearly reveal the importance of the convective and radiative heat transfer in the precise structure and NOx emission of the present confined combustor with a cooling wall.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1997년도 추계학술대회 발표논문집:21세기를 향한 정보통신 기술의 전망
• /
• pp.451-462
• /
• 1997

A 2-dimensional numerical analysis is presented for thermal-electron heat conduction effects upon the electron transport and the drain current-voltage characteristics of submicron GaAs MESFETs, based on the use of a nonstationary hydrodynamic transport model. It is shown that for submicron GaAs MESFETs, electron heat conduction effects are significant on their internal electronic properties and also drain current-voltage characteristics. Due to electron heat conduction effects, the electron energy is greatly one-djmensionalized over the entire device region. Also, the drain current decreases continuously with increasing thermal conductivity in the saturation region of large drain voltages above 1 V. However, the opposite trend is observed in the linear region of small drain voltages below 1 V. Accordingly, for a large thermal conductivity, negative differential resistance drain current characteristics are observed with a pronounced peak of current at the drain voltage of 1 V. On the contrary, for zero thermal conductivity, a Gunn oscillation characteristic is observed at drain voltages above 2 V under a zero gate bias condition.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.16-25
• /
• 2004

구리분말 소결윅 히트파이프의 열수송 한계를 예측하는 이론적 해석을 수행하였다. 히트파이프의 직경은 8 mm이고 물을 작동유체로 사용하였다. 입자의 직경을 대표적인 5 가지로 분류하여 각각의 유효 모세관 반경($r_c$) 기공률($\varepsilon$), 투파율(K)을 토대로 작동온도와 윅 두에 그리고 경사각에 따른 모세관압력과 열수송 한계, 열저항을 분석하였다. 소결윅의 모세관한계는 입자 직경이 크고 윅 두께가 증가하며 작동온도가 높을수록 증가했다 기공률과 모세관 반경이 증가할수록 열수송 한계가 높아졌으며, 윅 두께가 증가함에 따라 열저항이 크게 상승하였다.