• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.2
• /
• pp.179-182
• /
• 1994

A study was conducted using four dairy heifers to determine the effect of 10, 20 and $30^{\circ}C$ environmental temperatures on the physiological responses and heat production, at a fixed level of TDN intake ($60.5\;g/kg^{0.75}\;d$). The analysis showed significant affects of environmental temperature on respiration rate (RR), mean body temperature (Tb), changes in body heat storage (S) and heat production (HP). The HP at $20^{\circ}C$ was almost the same as at $10^{\circ}C$, but the HP at $30^{\circ}C$ was 11% higher than at $10^{\circ}C$. A tendency for an elongation of standing time (ST) with the increase in environmental temperature was also observed. These results suggest that the increase in energy cost of elongation of ST ($9.2\;kJ/kg^{0.75}\;d$) and $1.3^{\circ}C$ increase in Tb ($17.3\;kJ/kg^{0.75}\;d$).

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.271-274
• /
• 1993

Four Holstein heifers were used in the present study to investigate the effect of standing and lying behaviors on heat production and physiological responses under low (L), medium (M) and high (H) levels of TDN intake. Rectal temperature (RT), respiration rate (RR), heart rate (HR), heat production (HP) and animals behavior (standing time, ST) were measured continuously for 5h (11:00-16:00) periods. There was a tendency for increased RT with TDN intake, and no difference in RT was observed between standing and lying. The RR, HR and HP during standing were significantly higher (p<0.05) than during lying. The difference between standing and lying HP were 4.41, 4.68 and $5.37kJ/kg^{0.75}$ h for L, M and H of TDN intake, respectively. These values showed that standing HP was 18.6-20.9% higher than lying HP. A multiple regression analysis of HP ($kJ/kg^{0.75}$ h) on TDN intake ($g/kg^{0.75}$ d) and ST (min/h) was HP = 7.75 + 0.28 TDN intake + 0.12 ST (R = 0.84). This analysis showed that the total HP not only depend on feed intake levels, but also depends on animal behavior. It was suggested that the change in HP due to the change in feed intake and animal behavior would influence the level of heat loss which was indicated by the changes in the RR and HR.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.3
• /
• pp.304-307
• /
• 1997

Rectal temperature (Tr), skin surface temperatures (Ts), and heart rate (HR) were measured continuously from birth (day 1) till day 7, while resting heat production (HP) was measured in a chamber on days 1, 3, 5 and 7, in order to study the characteristic variation of Tr in newborn calves by heat balance methods. Despite constant levels of milk being given to the newborn calves each day, daily mean resting HP was lowest on the day of birth, then increased to peak on day 3 and then decreased slightly thereafter. Daily mean HR was higher on days 2, 3 and 4, than on other days. Tr exhibited diurnal rhythms and daily mean Tr was low on day 1, high on day 3, and then decreased slightly after day 3. Daily average mean skin temperature (mTs) was similar on all days. Mean body temperature (Tb) exhibited diurnal rhythms and had a similar range between days, suggesting that heat balance and thermoregulation were carried out effectively on each day. The variation of Tb appeared to be synchronized with that of HP and suggested that newborn calves might use variations in the levels of Tb to facilitate the body's required levels of heart loss.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1273-1279
• /
• 2016

Production of iodine-131 by neutron activation of tellurium in tellurium dioxide ($TeO_2$) material requires a target that meets the safety requirements. In a radiopharmaceutical production unit, a new lid for a can was designed, which permits tight sealing of the target by using tungsten inert gaswelding. The leakage rate of all prepared targets was assessed using a helium mass spectrometer. The accepted leakage rate is ${\leq}10^{-4}mbr.L/s$, according to the approved safety report related to iodine-131 production in the TRIGA Mark II research reactor (TRIGA: Training, Research, Isotopes, General Atomics). To confirm the resistance of the new design to the irradiation conditions in the TRIGA Mark II research reactor's central thimble, a study of heat effect on the sealed targets for 7 hours in an oven was conducted and the leakage rates were evaluated. The results show that the tightness of the targets is ensured up to $600^{\circ}C$ with the appearance of deformations on lids beyond $450^{\circ}C$. The study of heat transfer through the target was conducted by adopting a one-dimensional approximation, under consideration of the three transfer modes-convection, conduction, and radiation. The quantities of heat generated by gamma and neutron heating were calculated by a validated computational model for the neutronic simulation of the TRIGA Mark II research reactor using the Monte Carlo N-Particle transport code. Using the heat transfer equations according to the three modes of heat transfer, the thermal study of I-131 production by irradiation of the target in the central thimble showed that the temperatures of materials do not exceed the corresponding melting points. To validate this new design, several targets have been irradiated in the central thimble according to a preplanned irradiation program, going from4 hours of irradiation at a power level of 0.5MWup to 35 hours (7 h/d for 5 days a week) at 1.5MW. The results showthat the irradiated targets are tight because no iodine-131 was released in the atmosphere of the reactor building and in the reactor cooling water of the primary circuit.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.9
• /
• pp.709-717
• /
• 2009

Heat transfer rate is a very important factor for the performance of a steam reformer because a steam reforming reaction is an endothermic reaction. Coaxial cylindrical reactor is the reactor design which can improve the heat transfer rate. Temperature, fuel conversion and heat flux in the coaxial cylindrical steam reformer are studied in this paper using numerical method under various operating conditions. Langmuir-Hinshelwood model and pseudo-homogeneous model are incorporated for the catalytic surface reaction. Dominant chemical reactions are assumed as a Steam Reforming (SR) reaction, a Water-Gas Shift (WGS) reaction, and a Direct Steam Reforming (DSR) reaction. Although coaxial cylindrical steam reformer uses 33% less amount of catalyst than cylindrical steam reformer, its fuel conversion is increased 10 % more and its temperature is also high as about 30 degree. There is no heat transfer limitation near the inlet area at coaxial-type reactor. However, pressure drop of the coaxial cylindrical reactor is 10 times higher than that of cylindrical reactor. Operating parameters of coaxial cylindrical steam reformer are the wall temperature, the inlet temperature, and the Gas Hourly Space Velocity (GHSV). When the wall temperature is high, the temperature and the fuel conversion are increased due to the high heat transfer rate. The fuel conversion rate is increased with the high inlet temperature. However, temperature drop clearly occurs near the inlet area since an endothermic reaction is active due to the high inlet temperature. When GHSV is increased, the fuel conversion is decreased because of the heat transfer limitation and short residence time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1523-1528
• /
• 2000

Four Suffolk ewes were used in Latin Square switch over design to study the effects of varying levels and sources of protein on heat production and thermoregulatory responses at daytime high ($33^{\circ}C$ temperature. They were fed Italian ryegrass hay supplemented with fishmeal and/or urea, providing three different levels of crude protein (CP) (low/unsupplemented: 7.9, medium: 11.6, and high: 15.8%) at $1.5{\times}maintenance$. Feeds were distributed at 0900 (30%) and 1700 (70%). Urea diet caused higher heat production and increased vaginal temperature compared to fishmeal and fishmeal-urea mix diets. Time spent standing, skin temperature and respiration rate of sheep fed urea were similar with those of sheep fed fishmeal. Sheep fed diet with low CP level had higher heat production, increased vaginal and skin temperature than sheep fed diet with medium CP content. Sheep on high CP diet produced significantly more heat than sheep fed medium CP diets. Their vaginal temperatures were similar with those of sheep fed medium CP diet but lower than those of sheep fed low CP diet. Respiration rates of sheep and time spent by them for standing on all diets did not differ significantly. These results suggest that urea is inferior protein supplement for thermoregulation of animal at hot environment, as it induced higher heat production than fishmeal and fishmeal-urea mix. Thermoregulatory response on fishmeal-urea mix diet was similar to fishmeal diet. Increasing CP of the diet from low to medium gives advantage for thermoregulation of animal. Increasing CP further to high level was not beneficial as it resulted in the responses of sheep similar to those on low protein diet.

• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.304-313
• /
• 2015

Background: Ginsenoside Rg3 is a promising anticancer agent. It is usually produced by heat treatment of ginseng, in which ginsenoside Rb1 is the major ginsenoside. A kinetic study was conducted to optimize ginsenoside Rg3 production by the heat treatment of ginsenoside Rb1. Methods: Ginsenoside Rb1 was heated using an isothermal machine at $80^{\circ}C$ and $100^{\circ}C$ and analyzed using HPLC. The kinetic parameters were calculated from the experimental results. The activation energy was estimated and used to simulate the process. The optimized parameters of ginsenoside Rg3 production are suggested based on the simulation. Results: The rate constants were $0.013h^{-1}$ and $0.073h^{-1}$ for the degradation of ginsenosides Rb1 and Rg3 at $80^{\circ}C$, respectively. The corresponding rate constants at $100^{\circ}C$ were $0.045h^{-1}$ and $0.155h^{-1}$. The estimated activation energies of degradation of ginsenosides Rb1 and Rg3 were 69.2 kJ/mol and 40.9 kJ/mol, respectively. The rate constants at different temperatures were evaluated using the estimated activation energies, and the kinetic profiles of ginsenosides Rb1 and Rg3 at each temperature were simulated based on the proposed kinetic model of consecutive reaction. The optimum strategies for producing ginsenoside Rg3 from ginsenoside Rb1 are suggested based on the simulation. With increased temperature, a high concentration of ginsenoside Rg3 is formed rapidly. However, the concentration decreases quickly after the reaching the maximal concentration value. Conclusion: The optimum temperature for producing ginsenoside Rg3 should be the highest temperature technically feasible below $180^{\circ}C$, in consideration of the cooling time. The optimum reaction time for heat treatment is 30 min.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.104-116
• /
• 1996

Anaerobic digestion is generally used for the treatment of volatile organic solids such as manure and sludge from waste water treatment plants. However, the reaction rate of anaerobic process is slow, and thus it requires a large reactor volume. To minimize such a disadvantage, physical and chemical pre-treatment is generally considered. Another method to reduce the reactor size is to adopt different reactor system other than CSTR. In this paper, the effects of heat pre-treatment and reactor configurations on the anaerobic treatability of volatile solids was studied. Carrot, kale, primary sludge, and waste activated sludge was chosen as the test materials, and the BMP method was used to evaluate the maximum methane production and first order rate constants from each sample. After the heat treatment at $130^{\circ}C$ for 30min., the measured increase in SCOD per gram VS was up to 394 mg/L for the waste activated sludge. However, the methane production potential per gram VS was increased for only primary and waste activated sludge by 17-23%, remaining the same for carrot and kale. The overall methane production process for the tested solids can be described by first order reactions. The increased in reaction constant after heat pre-treatment was also more significant for the primary and waste activated sludge than that for carrot and kale. therefore, the heat pre-treatment appeared to be effective for the solids with high protein contents rather than for the solids with high carbohydrate contents. Among the four reactor systems studied, CSTR, PFR, CSTR followed by PFR, and PFR with recycle, CSTR followed by PFR appeared to be the best choice considering methane conversion rate and the operational stability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.943-950
• /
• 2015

Heat stress has adverse effects on fertility of dairy animals. Decline in fertility is linearly associated with an increase in combination of both temperature and humidity. The purpose of this study was to investigate the relationship between temperature humidity index (THI) and the pregnancy rate of Murrah buffaloes in a subtropical climate. The effects of genetic and non-genetic factors viz., sire, parity, period of calving and age group at first calving were found non-significant on pregnancy rate. The effect of THI was found significant (p<0.001) on pregnancy rate of Murrah buffaloes calved for first time and overall pregnancy rate. The threshold THI affecting the pregnancy rate was identified as THI 75. The months from October to March showed THI<75 and considered as non heat stress zone (NHSZ), while months from April to September were determined as heat stress zone (HSZ) with $THI{\geq}75$. The lowest overall pregnancy rate (0.25) was obtained in July with THI 80.9, while the highest overall pregnancy rate (0.59) was found in November with THI 66.1. May and June were identified as critical heat stress zone (CHSZ) within the HSZ with maximum decline (-7%) in pregnancy rate with per unit increase in THI. The highest overall pregnancy rate was estimated as 0.45 in NHSZ with THI value 56.7 to 73.2. The pregnancy rate was found to have declined to 0.28 in HSZ with THI 73.5 to 83.7. However, the lowest pregnancy rate was estimated as 0.27 in CHSZ with THI value 80.3 to 81.6.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.244-249
• /
• 2004

The effects of supplemental betaine ($Betafin^{(R)}$) in the drinking water (50 g/kg) (WB) or feed (100 g/kg) (FB) were investigated on male broiler chickens ($Cobb{\times}Cobb$) exposed to 4 h episodes of heat stress at $34{\pm}1^{\circ}C$ on day (d) 35 and $36{\pm}1^{\circ}C$ from d 36 to 41. Prior to (d 1 to 34) and following heat exposure (d 35 to 41), betaine supplementation had no significant effect on body weight, total feed intake and cumulative feed conversion ratios of broilers. The total water intake of WB chicks was lower compared to controls. Prior to heat exposure, there was no difference in percentage of mortality among the three dietary groups. Following the heat challenge period, although higher percentage of control chicks succumbed to the heat challenge as compared to those of WB, it was not significantly different. The WB and FB chicks were less hyperthermic than controls in response to the heat challenge. Irrespective of treatment groups, the heat treatment resulted in a marked elevation in heterophil/lymphocyte ratios (HLR). The WB birds, however, had smaller increase in HLR than those of controls during heat exposure. Antibody production against Newcastle disease vaccine on day 35 was not affected by betaine supplementation. On d 42, WB birds had higher antibody production than those of FB. It is concluded that the WB treatment, as measured by HLR, antibody production and mortality rate, has advantages over the FB group under heat stress conditions.