• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1993년도 추계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.3-3
• /
• 1993

In mechanical testing of W-Ni-Pe heavy alloys, the cracks nucleate at W/W interface and propagate through W/ Imatrix interface or through matrix phase together with the cleavage of W grains. The mechanical properties can therefore be improved by control of the interfacial strength and area. In this presentation, some experimental result and techniques on this subject will be reviewed and discussed. The hydrogen embrittlement caused by the hydrogen segregation at interfaces during sintering in an hydrogen atmosphere can be removed by an heat-treattnent in vacuum or in an inert atmosphere. The heat-treatment condition can be estimated by using a diffusion equation for a cylindrical shape. The mechanical properties, in particular the impact property, are degraded by the segregation of non-metallic impurities, such as Sand P. The degradation can be prevented by adding a fourth element, such as La or Ca, active with the non-metallic impurities. The cyclic heat-treatment at usual heat-treattnent tempemture causes the penetration of matrix between W/W grain boundaries and results in remarkable increase in impact energy. This is due to an increase in the area of ductile failure during the impact test. The instability of W/matrix interface casued by addition of Mo or Re can be controlled by using W powders of different size. The increase in the interfacial area in found to be related to the presence of non-equilibrium pure W gmins among W(Mo or Re) solid solution gmins.

• 대한한방내과학회지
• /
• 제34권4호
• /
• pp.428-437
• /
• 2013

Objectives : The aim of this study was to examine if there is a significant correlation between the changes of Fire- and Heat- related symptoms and motor function recovery in acute cerebral infarction patients. Methods : We studied inpatients within a month after the onset of cerebral infarction who were admitted at Kyunghee University Medical Center from May 2011 to January 2013. We executed correlation analysis between Fire-heat pattern score and motricity index score at visit 1 and visit 2, and checked if there was a significant correlation between the changes of Fire-heat pattern score and changes of motricity index score. Also, we compared the changes of both scores in patients taking Fire-heat and non Fire-heat pattern prescriptions. Results : There was a significant correlation between the Fire-heat pattern score and Motricity index score at visit 1 and visit 2, and changes of Fire-heat pattern score showed significant correlation with changes of motricity index score. Patients taking Fire-heat pattern prescriptions showed significant change in Fire-heat pattern score after herb-medication treatment while patients taking non-Fire-heat prescriptions showed insignificant change in Fire-heat pattern score. Conclusions : This study provides evidence that taking a Fire-heat pattern prescription could be considered as a first line herb-medication treatment in acute cerebral infarction patients.

• 열처리공학회지
• /
• 제5권3호
• /
• pp.171-178
• /
• 1992

The effect of nozzle characterristics on the mist-cooling heat transfer was investigated under the various flow conditions. Two different types of twin fluid nozzle were used, one is a $90^{\circ}$ angle tip nozzle with needle and the other is a $90^{\circ}$ angle tip non-needle nozzle. The cooling rate from the heated surface was measured and obtained the boiling curve as a function of surface temperature. An immersion sampling was employed for the measurement of droplet size of the spray. As a result of this experiment, the liquid sheet type nozzle shows better atomization when the mass ratio Mr>2.0, and collects more liquid droplets on the heated surface that results in better cooling effect. It was found that the maximum heat flux and heat transfer coefficient increased with increase in the volumetric flow rate, whereas the maximum heat flux decreased with increase in spray distance. The cooling effect depends upon the amount of collected droplet and droplet size, but it strongly depends upon the amount of collected droplet.

• 대한가정학회지
• /
• 제23권2호
• /
• pp.29-36
• /
• 1985

This experiment was conducted to investigate changes of the components in steamed and roasted green tea after 10 min, 20 min and 30 min of heat treatment of heat treatment at $110^{\circ}C$. Vitamin C and tannin were determined by spetrophotometry. Total nitrogen, water-soluble nitrogen and water-soluble non protein nitrogen were determined by Kjeldahl analysis system. Aromas were identified by gas chromatography. After heat treatment, contents of most compounds decreased. Tannin and caffeine decreased a little bit, while vitamin C decreased considerably. There were both decreases and increases in aromas. Aromas which increased were geraniol, trans-2-hexenol, linalool, $\alpha$-ionone and $\beta$-ionone. From these results, it was concluded that the highest quality of green tea was one steam- treated for 10 min at $110^{\circ}C$.

• 열처리공학회지
• /
• 제35권5호
• /
• pp.239-245
• /
• 2022

The purpose of this study is to evaluate the degree of microstructural change of materials using ultrasonic nonlinear parameters. For microstructure change, isothermal heat-treated ferritic 2.25Cr steel and low-cycle fatigue-damage copper alloy were prepared. The variation in ultrasonic nonlinearity was analyzed and evaluated through changes in hardness, ductile-brittle transition temperature, electron microscopy, and X-ray diffraction tests. Ultrasonic nonlinearity of 2.25Cr steel increased rapidly during the first 1,000 hours of deterioration and then gradually increased thereafter. The variation in non-linear parameters was shown to be coarsening of carbides and an increase in the volume fraction of stable M6C carbides during heat treatment. Due to the low-cycle fatigue deformation of oxygen-free copper, the dislocation that causes lattice deformation developed in the material, distorting the propagating ultrasonic waves, and causing an increase in the ultrasonic nonlinear parameters.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.60-67
• /
• 2012

In the study, the effect grinding condition on the workpiece arithmetical average roughness(Ra) to 10 steps leading to cutting each section with the spindle rotational speed 8000rpm and feed rate 150mm/min of grinding in GC(green silicon carbide) grinding processing after heat treatment and non heat treatment of SCM415 material. Also the following conclusions were obtained analysis of stress distribution displacement and finite elements method(FEM) on assemble parts with 3+2 axis simultaneous control through grinding and gave a load 11kg on ATC arm both sides gave a load of 11kg. For the centerline average roughness(Ra) in the heat and non-heat treatment work pieces, which were appeared the most favorable in the fifth section were $0.511{\mu}m$ and $0.514{\mu}m$, that were shown in the near the straight line section was the smallest deformation of curve. In addition, the bad surface roughness appeared on the path is too long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.1-10
• /
• 2008

Public interest in healthy hairs gets growing as damaged hairs are seen more frequently with the generalization of heat permanent waves. For this study, experiments have been conducted to understand the influences on the changes in physical and morphological features of wave forms and damaged hairs, by collecting virgin hairs from the women in their mid-20's, who had not experienced chemical applications, and by dividing the applications of heat perm hair treatments, PPT(for pre-treatment) and LPP(for post-treatment), into the pre-treatment, the post-treatment, the pre & post-treatment, and the non-treatment. For the wave formations, curl waves were investigated by the bare eyes using the pictures taken by a digital camera. For the comparison of physical features, the experiments of tensile strength and elongation were done and their mean values were found. For the observations of morphological features, the pictures were taken by SEM for comparison. As for the findings, regarding the curl wave shapes of hairs, the most even and elastic S curl was formed in the case of non-treatment. In the physical features, both of the tensile strength and elongation showed a decreasing tendency in line with the hair damage levels, and the case of the pre & post-treatment indicated the tendency most similar to the control group. In the morphological features of the cuticle, observed with an SEM, the pre-treatment showed the higher possibility of reducing the cuticle damages than the post-treatment did. LPP was found to play the role of protective membrane for the post-treatment, and the pre & post-treatment turned out to reduce most effectively the cuticle damages.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.470-477
• /
• 2015

국내산 잣나무(Pinus koraiensis Sieb. et Zucc.) 열압밀화재의 치수안정성 확보를 위해 열압밀화 후 열처리를 실시하여 흡수시험을 실시하였다. 잣나무재를 압축세트량 50%로 열압밀화하여 비중 0.84의 고비중재를 얻을 수 있었다. 열처리 온도와 시간이 증가함에 따라 열압밀화재의 흡수성과 팽윤성은 감소하였다. 그리고 열압밀화 후 열처리에 의해 열압밀화재의 치수안정성은 크게 향상되었다. 대조군의 두께 회복률이 11.5%인 반면, $120^{\circ}C$ 온도에서 24시간 열처리 된 그룹의 두께회복도는 3.8%로 나타났다. 열압밀화 후 열처리는 열압밀화재의 치수안정성 확보를 위한 매우 효과적인 방안임을 확인하였다.

• 농업과학연구
• /
• 제46권3호
• /
• pp.637-643
• /
• 2019

The aim of the present study was to evaluate the effect of the induced heat stress on physiological response and serum biochemical parameters involving glucose, cholesterol, blood urea nitrogen (BUN), non-esterified fatty acids (NEFA), and cortisol in Holstein calves. Ten calves were kept in a climate controlled room (air temperature $37^{\circ}C$ and 90% humidity from 09:00 to 19:00) for three days. Those animals were given a one-day adaptation period. During the treatment period, we measured the skin temperature six times. Following the treatment periods, blood samples were collected before the experiment began (09:00) and at the end of the stress period (19:00). To aid analysis of the biochemical parameters, also we monitored the rectal temperature. The results, exhibited that both rectal and skin temperature showed increase in the heat stress-induced animals as compared with unstressed animals. Moreover, we noticed that the levels of BUN and NEFA increased in the blood serum of heat stress induced animals when compared with un-stressed ones. From these results, we concluded that the physiological and biochemical changes in the calves were induced by heat stress. Hence, the present study findings could be employed as base line data for development of stress reduction techniques in the dairy industry.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.555-556
• /
• 2006