• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.40-44
• /
• 2001

This study was carried out to investigate relationship between contents of moisture and chemical components in burley tobacco after heat treatment. Initial moisture contents of burley tobacco was 32% after cutting and casing. Burely cut tobaccos were treated at various temperature(10$0^{\circ}C$, 13$0^{\circ}C$, 145$^{\circ}C$ and 16$0^{\circ}C$) and time(0, 5, 10, 15, 20 and 30 min) in mechanical convection oven. Moisture contents of burley tobacco after heat treatment were in the range of 1.9% to 18.4%. Relationship between moisture contents and total sugar, pH, total volatile base, ammonial, L value of color, nicotine, nornicotine, and $\beta$-nicotyrine contents were positively correlated. Correlation between moisture contents and crude ash, ether extracts, 2,6-deoxyfructosazine, 2,5-deoxyfructosazine, a value of color, citric acid, m-xylene, ${\gamma}$-butyrolactone and 5-methyl-2-furfural were negative.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.67-73
• /
• 1995

This study was undertaken to investigate the effect of heat treatment on the dynamic viscoelasticity of three species of Phyllostachys bambusoides, Phyllostachys nigra var. henonis and Phyllostachys pubescens, grown in southern Korea. The bamboo was treated for 3~24 hours at $60{\sim}180^{\circ}C$, and then was treated in a climatic chamber for 3~48 hours at $40^{\circ}C$ and 95% relative humidity. The results obtained are summarized as follows : 1. Dynamic Young's modulus decreased with increasing temperature and duration of the heat treatment. 2. Internal friction decreased with increasing treatment duration. 3. Moisture absorption decreased with increasing temperature and duration of the heat treatment. 4. Dynamic viscoelasticity decreased, whereas internal friction slowly increased, with increasing moisture content.

• Journal of the Korea Furniture Society
• /
• v.19 no.4
• /
• pp.229-234
• /
• 2008

In a previous study, it was revealed that three major softwoods, Japanese pine, Korean pine and Japanese larch, heat-treated at $220^{\circ}C$, could produce high quality dark-colored boards. It is known that heat treatment decreases the hygroscopicity of wood. The hygroscopicity of major domestic softwoods and hardwoods heat-treated at $220^{\circ}C$ was investigated by a saturated salt solution method and compared with that of black and white charcoals. Equilibrium moisture contents of wood decreased with the increase of heat treatment time. Isotherm shapes of wood species were different from those of charcoals. Heat treatment decreases the equilibrium moisture contents of black locust more than those of Korean pine and Japanese larch. It was found that surface hardness of wood is improved by heat treatment to a certain extent, but a longer heat treatment causes thermal degradation, resulting in the decrease of the surface hardness.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.2
• /
• pp.13-20
• /
• 1986

The effect of heat treatment on the dynamic viscoelasticity of the woods of Picea sitchensis and Paulownia coreana which have been for musical instruments was investigated. The treatment was made in a temperature range of 60-180$^{\circ}C$ for periods of 3 hours to 24 hours. The results obtained are summarized as follows: Moisture absorption decreased with increasing temperature. Dynamic Young's modulus decreased with increasing temperature and hours. Dynamic viscoelasticity decreased with increasing moisture content, but internal friction increased with increasing amount of moisture content.

• Korean Journal of Food Science and Technology
• /
• v.53 no.1
• /
• pp.92-98
• /
• 2021

The effects of heat-moisture treatment (HMT) on rice flour (RF) have been investigated for possibility of texture modifier in protein-based foods matrix, tofu. The optimum condition for preparation of tofu with maximum textural parameters was investigated by using response surface methodology (RSM). Rice flour was subjected to moisture content (10-30%) and heating temperature (100-140℃). Based on the response surface and superimposed plots, the optimized conditions of hydrothermally treated rice flour was as followed: moisture content, 22%; temperature, 130℃, which showed lower swelling power as compared to native RF and became more stable during continuous heating and agitation than native one. Tofu, prepared with HMT-RF, showed a denser network structure than that with RF, thereby inducing an increase in textural parameters. From the above results, the addition of HMT-RF could preserve the quality of tofu and be useful for developing an acceptable protein-based food product.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.447-447
• /
• 2023

This study aimed to convert underutilized moso bamboo into high-value added products such as fences, interior materials, lighting fixtures, and accessories. Green moso bamboo poles with a diameter of approximately 10 cm and a length of approximately 3.7 m were heat treated at 140℃ using a large-scale kiln. The processing time was meticulously adjusted through various stages, including pretreatment (6-8 hours at 60℃), cooking (8-10 hours at 100℃), steaming (26-30 hours at 120℃), heating (4-6 hours at 140℃), and finally, cooling (below 80℃). A meticulously designed heat treatment process has enabled efficient mass production of moso bamboo poles with improved qualities, including minimal splitting, moisture levels below 3%, and a specific gravity of 1.05. The focus of this study was to present the physical and drying properties, such as color, dimensional change, specific gravity, moisture content, and splitting, observed during the heat treatment process.

• Applied Biological Chemistry
• /
• v.30 no.3
• /
• pp.242-249
• /
• 1987

Physicochemical properties on heat-moisture treatment of sweet potato starch were investigated. Starch granules of sweet potato observed by photomicroscope, polarized-light microscope and scanning electron microscope were round and polygonal. X-ray diffraction pattern was changed from Ca-pattern to A-pattern upon heat-moisture treatment. Water binding capacity was drastically increased as the moisture level was increased. The swelling power and solubility at the same temperature were decreased by heat-moisture treatment. Transmittance of 0.1% starch suspensions was increased rapidly from $65^{\circ}C$ in case of untreated starch and from $70^{\circ}C$ in case of treated starch. The starch on heat-moisture treatment was gelatinized over higher temperature range than the untreated starch.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.97-101
• /
• 1987

Physicochemical properties of heat-moisture (18, 21, 24 and 27%) treated naked barley (Youngsanbori) starch indicated that crystailinity of the starch was decreased upon treatment and water-binding capacity drastically increased as the moisture level increased. The swelling power was decreased, but the solubility increased by heat-moisture treatment. Apparent viscosity in aqueous sodium hydroxide solution was repressed as moisture-treatment level increased. Amylograph hot paste vicosities were decreased upon treatment except initial pasting temperature.

• Korean Journal of Food Science and Technology
• /
• v.19 no.5
• /
• pp.435-440
• /
• 1987

Gelatinization properties of heat-mositure treated potato and sweet potato starches were investigated. Water-binding capacity of starch was increased by heat-mositure treatment, which was more pronounced in sweet potato starch. Blue value was not affected by the treatment. Amylograph viscosities were decreased by heat-mositure treatment, which was more pronounced in potato starch. Critical concentration of NaOH for gelatinization of starch increased as moisture level increased. Gel volume of starch upon KSCN gelatinization was higher in potato starch. Gelatinized starches showed Binghamapseudoplastic behavior. Consistency index and yield stress were drastically decreased upon heat-moisture treatment.

• Korean journal of food and cookery science
• /
• v.22 no.2 s.92
• /
• pp.147-157
• /
• 2006

To improve the properties of non-waxy rice flours for baking, soaked-wet milled rice flour (SWRF) was adjusted moisture content (MC) to 30 and 50 % and heated at 50 and $70^{\circ}C$ in a shaking water bath for 6 and 18 hrs, respectively. Moisture-heat treated rice flours were investigated with regard to particle size distribution, and morphological, physicochemical and pasting properties for comparing dry and wet milled flours. The particle size of rice flour treated with 30% MC was distributed between $4-20{\mu}m\;and\;100-200{\mu}m$, like SWRF. The particles above $200{\mu}m$ in the flour were produced at higher heating temperature. By SEM, starch granules were found in the rice flours treated with 30% MC, who whereas aggregated starch granules were shown in the flours treated with 50% MC. Moisture-heat treatment using higher MC and heating temperature decreased the lightness and increased the yellowness of non-waxy rice flours. Water binding capacity of 30% moisture treated rice flour was similar to that of SWRF. In the same moisture treated rice flour, swelling power was higher, but solubility was lower at $50^{\circ}C$ than at $70^{\circ}C$. The initial pasting temperature by RVA increased after moisture-heat treatment. The peak viscosity of moisture-heat treated rice flour was higher for 30% moisture than that of the others. The rice flour treated with 30% MC and heated at $50^{\circ}C$ showed low setback and increased stability for retrogradation.