• 대한정형도수물리치료학회지
• /
• 제1권1호
• /
• pp.9-14
• /
• 1995

인체에서 발생하는 체열을 과학적으로 이용하여 질병을 진단하고 치료과정을 관찰하고 예후를 추측할 수 있는 Thermography는 현대의학의 임상 여러분야에서 응용할 수 있는 유용한 진단장비에 속한다 하겠다. 인체의 피부온도는 좌우 대칭적으로 온도분포를 나타내며 여러가지 생리학적인 원인에 의하여 온도는 변화할 수 있으며, 그러한 온도변화는 여러 질병과의 연관성을 갖게 된다. Thermography는 유방암세포의 증식에 따른 유방체표면의 초기온도 상승을 screening 함으로서 조기에 유방암을 발견할 수 있으며, 척추의 신경근 자극에 따른 체열분포를 파악함으로서 신경근의 이상유무 및 척추질환을 진단할 수 있으며, 말초 혈액순환 장애 등으로 인한 질환에 있어서도 뚜렷한 체표면 온도분포를 나타내 줌으로서 혈액순환의 장애분포를 시각적으로 관찰할 수 있는 이점을 지니고 있다. 또한 정형 물리치료 분야에 속하는 근-골격계 질환에 있어서의 근육통, 압통점, 염좌, 염증질환 등을 구별할 수 있고 나아가 치료 전후에 적외선 체열검사를 실시해 봄으로서 치료전이나 치료결과에 대한 객관적인 평가를 할 수 있다는데 큰 의의가 있다고 하겠다.

• 신재생에너지
• /
• 제1권2호
• /
• pp.53-59
• /
• 2005

Objective of the research is to demonstrate solar thermal space and ground heating system which is integrated to a green-house culture facility for reducing healing cost, Increasing the value of product by environment control, and developing advanced culture technology by deploying solar thermal system. Field test for the demonstration was carried out in horticulture complex In Jeju Island. Medium scale solar hot water system was installed in a ground heating culture facility. Reliability and economic aspect of the system which was operated complementary with thermal storage and solar hot water generation were analyzed by investigating collector efficiency, operation performance, and control features. Short term day test on element performance and Long term test of the whole system were carried out. Optimum operating condition and its characteristics were closely Investigated by changing the control condition based on the temperature difference which Is the most important operating parameter For establishing more reliable and optimal design data regarding system scale and operation condition, continuous operation and monitoring on the system need to be further carried out. However, It is expected that, in high-insolation areas where large-scale ground storage is adaptable, solar system demonstrated in the research could be economically competitive and promisingly disseminate over various application areas.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권1호
• /
• pp.29-38
• /
• 2001

In this paper, the defrosting characteristics of a PTC heating sheet is investigated by means of a defrosting heat source for the fin-tube heat exchanger in a refrigerator The defrosting characteristics of the PTC heating sheet are examined and compared with those of a conventional electric heater experimentally. It is found that the characteristics of the water draining rate with the defrosting time show a smoothly oscillating pattern when the PTC heating sheet Is used, and the drained water is completely melted. The defrosting efficiency of the PTC heating sheet is found to be about 75%, which is about 25% higher than that of the electric heater. Also, the reduction of the defrosting time and the increment of the defrosting efficiency may be obtained by improving the arrangement of the heating elements of the healing sheet. It is shown that the defrosting time of the PTC heating sheet increases linearly with the amount of frost, whereas the defrosting efficiency is nearly constant. When applying the PTC heating sheet to the refrigerating system, one should notice the fact that the defrosting performance of the PTC heating sheet may be degraded due to the repetitive operations.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권2호
• /
• pp.109-115
• /
• 2015

Odontoma is the most common odontogenic benign tumor, and the treatment of choice is generally surgical removal. After excision, bone grafts may be necessary depending on the need for further treatment, or the size and location of the odontoma. Although the osteogenic capacity of a demineralized tooth was verified as early as 1967 by Urist and many other investigators, the cumbersome procedure, including a long demineralization time, may be less than comfortable for clinicians. A modified ultrasonic technology, with periodic negative pressure and temperature control, facilitated rapid and aseptic preparation of demineralized teeth for bone grafts. This approach reduces the demineralization time dramatically (${\leq}80$ minutes), so that the graft material can be prepared chairside on the same day as the extraction. The purpose of this article is to describe two cases of large compound odonotomas used as graft material prepared chairside for enucleation-induced bony defects. These two clinical cases showed favorable wound healing without complications, and good bony support for future dental implants or orthodontic treatment. Finally, this report will suggest the possibility of recycling the benign pathologic hard tissue as an alternative treatment option for conventional bone grafts in clinics.

• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.186-195
• /
• 2021

In this study, when stem cell culture solution is used as a cosmetic ingredient, one of the most prominent problems is that the ingredients generally have low thermal stability. Therefore, in this study, in order to find out how the stem cell culture medium is heated or preserved at high temperature, the effect of various effects of stem cells on the various effects of the stem cells was investigated. Investigated. As a result of the experiment, the wound healing assay confirmed that the cell migration increased after 6 hours, and after 24 hours, it was confirmed that the cell mobility was increased and cell division was promoted, thereby being concentrated. As a result of investigating the amount of transdermal water loss by preparing a cosmetic product containing stem cell culture solution, it was confirmed that the culture solution addition group showed an improvement rate of 31% compared to the non-added group, thereby helping in skin wound recovery. As a result of this, it is considered that this point should be considered when the stem cell culture medium is used as an active ingredient in cosmetics in the future.

• Journal of Veterinary Science
• /
• 제24권6호
• /
• pp.79.1-79.16
• /
• 2023

Background: The need for a storage method capable of preserving the intrinsic properties of bones without using toxic substances has always been raised. Supercooling is a relatively recently introduced preservation method that meets this need. Supercooling refers to the phenomenon of liquid in which the temperature drops below its freezing point without solidifying or crystallizing. Objectives: The purpose of this study was to identify the preservation efficiency and applicability of the supercooling technique as a cortical bone allograft storage modality. Methods: The biomechanical effects of various storage methods, including deep freezing, cryopreservation, lyophilization, glycerol preservation, and supercooling, were evaluated with the three-point banding test, axial compression test, and electron microscopy. Additionally, cortical bone allografts were applied to the radial bone defect in New Zealand White rabbits to determine the biological effects. The degree of bone union was assessed with postoperative clinical signs, radiography, micro-computed tomography, and biomechanical analysis. Results: The biomechanical properties of cortical bone grafts preserved using glycerol and supercooling method were found to be comparable to those of normal bone while also significantly stronger than deep-frozen, cryopreserved, and lyophilized bone grafts. Preclinical research performed in rabbit radial defect models revealed that supercooled and glycerol-preserved bone allografts exhibited significantly better bone union than other groups. Conclusions: Considering the biomechanical and biological superiority, the supercooling technique could be one of the optimal preservation methods for cortical bone allografts. This study will form the basis for a novel application of supercooling as a bone material preservation technique.

• Journal of Acupuncture Research
• /
• 제20권6호
• /
• pp.63-79
• /
• 2003

Objective: It makes a through study on the popularization and usefulness paln of Moxa Combustion, therefore popularizing practical use of that. Methods: It was based on the established treatises and books, in order to studying about the literature of Moxa Combustion Results & Conclusions: It makes a through study on the whole of Moxa Combustion, the results as follows. 1. We explained(illustrated) the origin, history, classification and mechanism(effect) of Moxa Combustion 2. The study of standardization plan of Moxa Combustion for popularization - The thermal stimulation of Moxa Combustion was decided the characteristic pattern of combustion temperature by moxa burning and that makes a measure to grasp the effective action of Moxa Combustion upon human body. Thereupon it is necessary to continue further studies by analysing the characteristic pattern of combustion temperature by moxa burning and there clinical effects in practice. 3. The usefulness of Moxa Combustion - The therapeutic effect of Moxa Combustion are hematopoiesis(increase the blood), analgesic function, increase the immunity, antioxidant activity, diuretic action, control of hormone(endocrine gland), supression of carcinogenesis, increase the self involution(natural healing), decrease of GOT/GPT, Glucose, Cholesterol level.

• The Plant Pathology Journal
• /
• 제24권4호
• /
• pp.392-399
• /
• 2008

Detached chili pepper fruits were inoculated with the conidial suspension of Colletotrichum acutatum JC-24 simultaneously (simultaneous inoculation, SI) and at delayed time (delayed inoculation, DI) after wounding with (delayed wound inoculation, DWI) or without additional wounding (delayed non-wound inoculation, DNI) at the inoculation time. Disease severity was significantly lowered by DNI, compared to SI. By DNI, the disease reduction rates were proportional with the length of delayed time, and greater at the high temperature range (18, 23 and $28^{\circ}$) than at the low temperature ($13^{\circ}$) tested. DWI was also effective in reducing the disease severity especially at 18oC; however, its effectiveness was lower than for DNI. In light microscopy, parenchyma cells at the wounding sites were modified structurally, initially forming new cell walls crossing cytoplasm, enlarged with multiple periclinal cell divisions, and finally layered like wound periderms. In DWI, the above structural modifications occurred, showing the restriction of the fungal invasion by the cell walls in enlarged modified cells, while no definite cellular modifications were found with proliferation of fungal hyphae in SI. Sclerenchyma-like cells with thickened cell walls were proliferated around the wounding sites, which were partially dissolved by DWI, probably leading to some disease development. All of these results suggest that the decline of the anthracnose disease in pepper fruit by the delayed inoculations may be derived from the structural modifications related to the healing processes of the previous wound inflicted on the tissues.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.67-84
• /
• 1991

This study was carried out to investiagate the residual stress caused by the mismatch of thermal expansion and the bond failure resistance of alloy-porcelain specimens. The thermal expansions of alloys and porcelains were measured by using a straight push-rod dilatometer. Porcelain glass transition temperatures, thermal expansion coefficients, and thermal compatibility indices were derived from length-versus-temperature curves. Strain gauges were used to experimentally determine the Young's moduli of porcelains, the residual stresses of porcelain surface, and tensile bond strengths of the specimens of simulated porcelain metal crown. The obtained results were as follows: 1. The coefficients of thermal expansion for alloys were the minimum of $13.53\mu/^{\circ}C$ and the maximum of $20.11\mu/^{\circ}C$ in the range of $100\sim600^{\circ}C$ and those for porcelains were the minimum of $7.72\mu/^{\circ}C$ and the maximum of $31.24\mu/^{\circ}C$ in the range of $100\sim500^{\circ}C$. 2. The glass transition temperature of porcelains exhibited the same value without my relation to the healing rate, and the thermal disharmony of porcelain and alloy was more affected by porcelains than by the alloys. 3. The Young's moduli of body porcelains were larger than those of opaque porcelains(P<0.01) 4. It seemed that the residual stresses of porcelain surfaces in the porcelainalloy systems were more affected by porcelains than by alleys. 5. The bond strengths of the procelain-base metal alloy systems were larger than those of the porcelain-precious metal alloy systems. The fracture strengths of porcelain surfaces showed significant difference between porcelains (P<0.05).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.20-20
• /
• 2011

It has been known that, under certain conditions, application of low-temperature atmospheric-pressure plasmas can enhance proliferation of cells. In this study, conditions for optimal cell proliferation were examined for various cells relevant for orthopaedic applications. Plasmas used in our experiments were generated by dielectric barrier discharge (DBD) with a helium flow (of approximately 3 litter/min) into ambient air at atmospheric pressure by a 10 kV~20 kHz power supply. Such plasmas were directly applied to a medium, in which cells of interest were cultured. The cells examined in this study were human synoviocytes, rat mesenchymal stem cells derived from bone marrow or adipose tissue, a mouse osteoblastic cell line (MC3T3-E1), a mouse embryonic mesenchymal cell line (C3H-10T1/2), human osteosarcoma cells (HOS), a mouse myoblast cell line (C2C12), and rat Schwann cells. Since cell proliferation can be enhanced even if the cells are not directly exposed to plasmas but cultured in a medium that is pre-treated by plasma application, it is surmised that long-life free radicals generated in the medium by plasma application stimulate cell proliferation if their densities are appropriate. The level of free radical generation in the medium was examined by dROMs tests and correlation between cell proliferation and oxidative stress was observed. Other applications of plasma medicine in orthopaedics, such as plasma modification of artificial bones and wound healing effects by direct plasma application for mouse models, will be also discussed. The work has been done in collaboration with Prof. H. Yoshikawa and his group members at the School of Medicine, Osaka University.