• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.50-57
• /
• 2003

In this study, the structural optimal design was applied to the girder of over head crane. The optimization was carried out using ANSYS code fur the deadweight of girder, especially focused on the thickness of its upper, lower, reinforced and side plates. The weight could be reduced up to around 15% with constraints of its deformation, stress and buckling strength. The structural safety was also verified by the buckling analysis of its panel structure. It might be thought to be very useful to design the conventional structures fur the weight save through the structural optimization. The objective function and restricted function were estimated by the orthogonal array, and the sensitivity analysis of design variable fur that was operated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1171-1177
• /
• 2008

The performance of growing rabbits fed Ruzi grass (Brachiaria ruziziensis), head lettuce (Lactuca sativa) residue, Mimosa pigra and water spinach (Ipomoea aquatica) was studied in an experiment using 64 rabbits (4 males and 4 females per treatment) of 2 breeds, New Zealand White and a crossbred between New Zealand White and native breed. The rabbits had an average initial weight of 668 g, were about 6 weeks old and were housed in individual pens. The foliages were fed ad libitum and a commercial concentrate was fed at a restricted level of 2% of body weight on a dry matter (DM) basis. In the digestibility experiment, the rabbits, 4 per foliage and males only, were fed the same foliages as in the growth experiment but without concentrate. Daily weight gain was lower in the group fed Ruzi grass, 14.8 g/d (p<0.001) compared to 17.6, 18.5 and 18.4 g/d for head lettuce, Mimosa pigra and water spinach, respectively. Feed intake and feed conversion ratio were lowest for the rabbits fed water spinach, 66 g DM/d and 3.6 kg DM/kg live weight, respectively. The New Zealand White breed had a higher daily gain than the crossbred rabbits (p<0.05), 18.0 and 16.7 g/d, respectively. There were no significant differences in feed intake, growth or feed conversion ratio due to sex. The digestibility coefficients of DM, organic matter, crude protein, crude fiber, neutral detergent fiber and acid detergent fiber were significantly lower (p<0.001) in the rabbits fed Ruzi grass. Breed and sex had no effect on digestibility. In conclusion, feeding head lettuce residue, Mimosa pigra and water spinach resulted in higher growth rate and digestibility than feeding Ruzi grass and can be recommended as alternative feeds.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.737-744
• /
• 2005

This study was aimed to provide the measurement data and shape classification of the head of the Korean male children for the headwear sizing systems. Five hundred twenty male children, aged nine to twelve years, participated f3r this study. The 17 regions on the head and height, weight of the subjects were directly measured by the expert experimenters. Factor analysis, cluster analysis, GLM analysis and Tukey HSD test were performed using these data. Through factor analysis, low factors were extracted upon factor scores and those factors comprised $69.76\%$ for the total variances. Three clusters as their head shape were categorized using four factor scores by cluster analysis. Type 1 was characterized by the widest width and Bitragion arc, shortest head length. Type 2 had the longest head length and the widest side width and the highest head length and head circumference. Type 3 was characterized by the smallest head circumstance, head width and side width, and medium head length.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.1
• /
• pp.103-109
• /
• 2016

The performance of a multi-head, computerized combination scaling system to automatically identify a group of agricultural products having a total weight within the target range has been optimized to reduce the package cycle time of the merchandise. First, the structure of the scale was modified to enable faster measurement by enhancing the dynamic stability during the process. Second, the high frequency noise in the measured signal was eliminated by a high frequency filter to provide more accurate weight data. Finally, the algorithm to identify a group of products with a total weight within the target range was modified to enable a user to select an optimal number of scales. According to the experimental verifications, this modified system reduced the package cycle time significantly and also was accurate in measuring the total weight of the selected products.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.273-283
• /
• 2018

The purpose of this study is to analyze the optimum driver selection according to shaft intensity, shaft length and shaft weight that are determining factors of driver shot. To achieve the above purpose, the subject were participate with handicap zero 10 male pro golfer and mean score 90(handicap about 18) amateur 10 male golfer. The used club limited number 1 driver, we tested 24 driver which is shaft intensity, length, weight, total weight and swing weight. Dependent variable was strike ball speed, flying distance and head speed. The findings can be summarized as follows. First, There is a significantly difference in CPM. Ball speed, head speed and flying distance according to driver shaft intensity were found to be the best when CPM is 230<. Second, There is a significantly difference in shaft length. Ball speed, and head speed according to driver shaft length were found to be the best at 46 inch and flying distance were found to be the best at 45 inch. Third, There is not significantly difference in SW. Ball speed and flying distance according to driver shaft weight were found to be the best with 65g. In the case of head speed, it was the fastest with 50g shaft. Four, total variables were significantly difference between in pro and amateur golfer. In conclusion, there would be differences in individual physical condition but the best result was found with a driver of CPM 230<, shaft length 46inch, and shaft weight 65g.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.11
• /
• pp.457-464
• /
• 2019

The weight of pig is one of the main factors in determining the health and growth state of pigs, their shipment, the breeding environment, and the ration of feed, and thus measuring the pig's weight is an important issue in productivity perspective. In order to estimate the pig's weight by using the number of pig's pixels from images, acquired from a Top-view camera, the posture determining and the head removal from images are necessary to measure the accurate number of pixels. In this research, we propose the fast and accurate method to determine the pig's posture by using a fast image processing technique, find the head location by using a fast deep learning technique, and remove pig's head by using light weighted image processing technique. First, we determine the pig's posture by comparing the length from the center of the pig's body to the outline of the pig in the binary image. Then, we train the location of pig's head, body, and hip in images using YOLO(one of the fast deep learning based object detector), and then we obtain the location of pig's head and remove an outside area of head by using head location. Finally, we find the boundary of head and body by using Convex-hull, and we remove pig's head. In the Experiment result, we confirmed that the pig's posture was determined with an accuracy of 0.98 and a processing speed of 250.00fps, and the pig's head was removed with an accuracy of 0.96 and a processing speed of 48.97fps.

• The Journal of Korean Physical Therapy
• /
• v.27 no.3
• /
• pp.159-163
• /
• 2015

Purpose: This study aimed to determine the interaction among the neck, trunk, and lower extremities on the non-paretic side in head rotation along with non-paretic-side weight shifting of stroke patients. To compare stroke patients' ability to control posture through muscle activity variation related to pertubation during head rotation along with the non-paretic limb. Methods: We tested 15 hemiplegic patients and 15 normal individuals. Each group's muscle activity was measured by electromyography in neutral head position and head rotation position. We compared each group's resu lt based on measured values in patients' non-paretic neck muscles, trunk muscles, and lower limbs muscles activation. Results: The study showed that muscle activity increased in the sternocleidomastoid muscle (102.26%, 53.00%), splenius capitis muscle (97.93%, 54.93%), erector spinae muscle (241.00%, 127.60%), external oblique abdominal muscle (256.66%, 152.00%), and internal oblique abdominal muscle (252.80%, 152.6%), peroneus longus muscle (117.53%, 137.13%) and gastrocnemius muscle (119.06%, 137.20%), while the results for the sternocleidomastoid muscle, splenius capitis muscle, erector spinae muscle, external oblique abdominal muscle, internal oblique abdominal muscle, peroneus longus muscle, and gastrocnemius muscle showed a statistically significant difference (p<0.05). Conclusion: It is hard for stroke patients to engage in normal movement control under suggested conditions because of the insufficient movement against gravity on the stroke patient's non-paretic side and impaired cooperative patterns. To solve these problems, patients need their bodies to improve through effective movement, resulting in advanced control of their effective and functional activity.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.4
• /
• pp.82-90
• /
• 2008

The generation amounts of manure and urine were total 4.57kg/head/d of 1.49kg manure/head/d and 3.08kg urine/head/d with consideration of 3 seasons and live weight. The finalized mean unit load generation of filth were estimated at BOD 199.5g/head/d, CODCr 413.5g/head/d, T-N 27.8g/head/d, T-P 5.3g/head/d with consideration of seasons and the type of stalls. The unit load generation of manure and urine from korean cow were analyzed as 10.9kg/head/day and 3.3kg/head/day, respectively. The unit load generation of manure from milch cow was analyzed to be 24.6L/head/day which was similar to the report of MOE(2006). The urine generation, 10.5L/head/day, was higher than the results from MOA(2000) and NIAR(2000), but was lower than the results from MOE(2006), NIER(1986) and KIST(1990). The unit load generation from egg layers estimated by discharged amount and concentration analysis increases in due to the difference of planting head numbers, feed stuffs and manure disposal. In case of deer unit load generation by herbivora were calculated to be higher than data from existing references because of the gap between weight per livestock and the generation amounts of manure and urine.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.287-296
• /
• 2009

This is written to present basic shot information among iron clubs and information of weight shift, because previous study conducted on all clubs was rut enough. This article is about shot analysis of iron club 3,4,5,6,7,8,9 and weight movement, conducted on four skilled golf players and four students who major in golf and are less than three years. The analysis of long and short irons showed statistically meaningful different results for all the participants but iron clubs of 3,4,5 didn't in head speed and ball speed. The skilled group showed better results in head speed, ball speed and direction, Launch angle than the unskilled group. In weight shift movement analysis, the unskilled group moved, on back swing top, their more weight(65.36%) but the skilled group was on their left foot (70.21%)when clubs were on impact moment. It shows that the skilled group put on power more efficiently by moving weight.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.24 no.3
• /
• pp.316-324
• /
• 2021

Purpose: The use of soy-based infant formula has increased widely in infants with cow's milk allergy (CMA). This study aimed to provide evidence on the growth pattern of CMA infants fed with soy-based infant formula in an Indonesian setting. Methods: A multi-site, intervention study was conducted among full-term and normal birth weight CMA infants. Within six months, the subjects were provided with a soy-based infant formula. Weight, height, and head circumference were measured at baseline, weeks 4, 8, 12, 16, 20, and 24. Adverse events were recorded by scoring atopic dermatitis and symptom-based clinical scores. Results: Based on the World Health Organization growth chart, we found that most of subjects had normal nutritional status for weight-for-age, length-for-age, weight-for-length, and head-circumference-for-age. There were statistically significant differences between baseline and end-line for weight-for-age, length-for-age, weight-for-length, and head circumference-for-age nutritional status. No allergic symptoms or intolerance toward soy formula were observed at the end of the intervention period. Conclusion: These results show that infants fed with soy-based infant formula have a normal pattern of growth.