• Journal of Korean Society on Water Environment
• /
• v.33 no.5
• /
• pp.572-579
• /
• 2017

Increased impervious surface caused by rapid urbanization serves to produce the discharge of non-point source pollutants such as total suspended solid (TSS). There exist various methods of removing TSS, including a filtration process using granular media (a well-known method to be practically used after the consideration of removal efficiency, clogging, and backwashing efficiency). To determine the TSS removal capability of the filter, we initially performed lab-scale experiments which assessed flow rates, influent concentrations, permeability co-efficients, the particular shapes of suspended solids and potential clogging, and also evaluated TSS removal efficiency when applied to filtration facility in a pilot-scale. In low filtration flux condition, the removal efficiency of suspended solids was more than 95 %, while decreased to 83% in high filtration flux. Regarding the clogging aspect of the experiment, total cumulative solids were loaded up to $19.15kg/m^2$, and TSS removal efficiency was noted to commence to decrease when the loaded solids exceeded $9.0kg/m^2$. It was also noted, however, that superior efficiency was maintained for six hours. In addition, for pilot-scale experiment, the removal efficiency was still high enough (83.4 %) for the solid concentration of 140 ~ 343 mg SS/L and after backwashing, head loss was recovered to 92 ~ 95 % during two hour filtration. With these results, It was confirmed that lifetime of the filter applied to the test was prolonged due to the high treatment efficiency and good backwashing efficiency for the cumulative solids load.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.72-81
• /
• 2014

This paper reports the test results of reinforced concrete exterior beam-column joints with high-strength concrete. The main parameters of eight specimens were joint failure modes, the compressive strength of concrete, and the head shapes of steel bars. All specimens were designed according to ACI 352R-02 design recommendations. Two types of failure modes were considered; J-failure and BJ-failure. The longitudinal steel bars were anchored by 90 degree standard hooks or headed reinforcement. Experimental results indicated that the current ACI design recommendation limited by the compressive strength of concrete somewhat underestimated the strength of beam-column joints with high-strength concrete. In the specimens showed joint shear failure, the strength of beam-column joints with headed bars was approximately 10 percent higher than that of joints with 90 degree standard hooks.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1089-1101
• /
• 2006

Following conclusions are drawn from study about Yukmigiwhangwon through referring to literatures and reviewing in the point of Hyungsang medicine. Yukmigiwhangwon was prescribed by Jeon Eul in order to cure five kinds of flaccidity of infants, but after since then it has been basically applied to symptoms which was caused by deficiency of the kidney not only infants but also adult. The deficiency of kidney is the lack of vital essence and body fluid stored in kidney, it happens because infants are born in the conditions of lack of receiving in the womb. And it happens because adults infringe the rules of life, especially the sexual life. Main symptoms of the poverty of renal functions are emptiness of the brain marrow, dizziness, forgetfulness, tinnitus, deafness, vertigo and dim eyesight, insomnia, the low back and knees aching and limping, heat on the legs, tibia aching, nocturnal emission, dry mouth, reddened tongue and little coating or non coating of the 'tongue, weak blood meridians. the treating method is nourishing Eum and supplementing kidney. In Dongeuibogam Yukmigiwhangwon is mentioned in the parts of vital essence, blood, voice, kidney, urine, eye, ear, the low back, hair, fire, exhaustion syndrome, cough, polydipsia, infant, etc. The shapes which Yukmigiwhangwon is applied to are the Dam Body Doing deficiency of Eum due to excess of Yang, man, infant, Jung type, Fish group, reverse triangular shape, big headed man, big eared man, big mouthed man, man having prominent cheekbones, man having long waist, man having big hips, man with thick hair or white hair, man with bald on the head, etc. In color it is applied to darkish complexion, flushed tip of the nose, or flushed cheek bones. Through inquiring into the clinical cases on the points of Hyungsang medicine Yukmigiwhangwon is efficacious cure to lumbago, symptoms of tendons and bones, symptoms of eyes and ears, symptoms of respiratory organs, dermatopathia, headache, polydipsia, urinary disorders, etc.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.1
• /
• pp.26-35
• /
• 2017

The high-cycle fatigue cracking and the resonance generated in operation of a centrifugal compressor are main cause of the impeller damage. In order to prevent the damage, the impeller is designed or modified to have sufficient strength to withstand the operating condition. The damage prevent design will lead to a change of the flow condition and the performance characteristics of the compressor. In this study, the computational analysis were performed to identify the flow and the performance characteristics. The cases are a scalloped and a increased the blade thickness models with a closed type impeller. As the analysis results, the value of head coefficient and total to total efficiency for the increased the blade thickness model was decreased by each 0.5% and 0.1% than the values of the baseline model. Each value for the scalloped model was increased by 0.4% and was decreased by 1.6%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.366-374
• /
• 2009

To determine the optimum operating conditions of the indented cylinder length grader based on varietal characteristics, broken rice removal capabilities were measured on the milled rice of 41 varieties at different conditions consisted of 3 types of indented cylinders with different indent-opening diameters and 3 different collecting-angles of broken rice. The broken rice removal capabilities were swayed by the indent's opening diameter and depth as well as the angle of the collecting trough of broken rice on the point of instrument, and by the kernel length and width as well as 1000 grain weight of milled rice on the point of rice variety. When the angle of broken rice collecting-trough reached to near the horizontal center line of the indented cylinder on the direction of upward turning side, which was referred $0^{\circ}$ in this paper, the amount of rice collected in trough increased, whereas the loss of head rice also increased. Considering the removal rate of broken rice as well as loss of head rice, it was thought that the suitable angle of trough for broken rice collecting was located $5^{\circ}$ to $15^{\circ}$ depending on varietal characteristic and indent opening diameter. It was thought that 4.2 mm or more of indent opening diameter was recommendable for the rice varieties having heavier 1000 grain weight than 22.3g, as well as larger sizes than 2.9 and 5.2 mm in width and length of rice kernel, respectively; 3.8 mm for the small-sized thin kernels, and a proper diameter between 3.8 and 4.2 mm for short to middle kernels. The varieties with relatively shorter length compared to width of kernel were more difficult to separate the broken rice than the opposite ones. For effective separation of that, it seems that some specific indent shapes such as wider opening and shallow depth etc. are required. When the broken rice content were excessively high, wider diameters of indent openings than specified sizes were thought to be the better.

• Journal of the Korean Society of Costume
• /
• v.40
• /
• pp.151-170
• /
• 1998

The purpose of this study is to examine the value of grotesque fashion and to predict the future fashion trend. The grotesque originates the formative art. It emerges towards of a century or transitional period in most case. In particular, it was used as the expressive method of an individual's inside and a satire on society through the work of artists in the Middle Age, the renaissance, the sym-bolism, the dadaism, the surrealism, the pop art, the technology art, and the post-modernism, etc. The grotesque in fashion is represented in the work of avant-garde fashion designers who lead the high fashion. The grotesque fashion which was combined with an image of non-formality, non-rationality, an absurdity and reality. It has been begun shape of female dress in the renaissance. Afterwards, it was represented in extremely exaggerated and distorted pop art, hippies' fashion in the 1960's. In the 1970's, it was reflected in genderless rock star and destructive punk fashion. It was also represented in the androgynous fashion which was combined with both sexes, the goth/gothic fashion which was expressed with a realistic and fanciful shape and the tattoo of skin-head in the 1980's. In the 1990's, the grungy look which was dirty and the cyber punk fashion. In general, it was also expressed by the avant-garde fashion designers. To sum up, a grotesque fashion which is expressed by experimental designers is classified into four shapes. 1, Union of some extraneous is expressed as different kinds of fashion theme, such as abnormality of texture, uses of surrealistic elements and chaos of sex. Although it appears that the abnormal union of grotesque has only discord and collision, it also shows a feeling of freedom for the tension. 2. Introduction of real and fanciful image is expressed as a cyborg, realistic description of disgusting animal skin and aggressive shape. Especially, it is worth while to notice Tierre Mugler and Alexander Macqueen's work which expressed the shape of mingling human of Middle Age. 3. distortion or exaggeration is expressed as an unformed shape, the exaggeration of a clothing size, the abnormal exaggeration of human body and the ignorance of clothing form. 4. Introduction of a disgusting image is expressed as an extremity of reality, motifs of death, clothing material of disgusting hair and the ostentation of sex. Motto which leads modern fashion is something new and shocking. The grotesque fashion is an expression of eagerness for something new. It often show something ironic in the form of humor which is embedded in an abnormal and shocking pattern. The grotesque fashion is represented as an extreme beauty. It will stand as an important element of the future fashion and as a particular style with the change and fluidity.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.1-7
• /
• 2013

In this study, the effects of various disk shapes of hydrant on the pressure drop are experimentally and numerically analyzed. The test methods for measuring pressure drop of hydrant are comply with standard of Underwriters Laboratory (UL). The hydrant as used in this study has one inlet, diameter 150 mm, and three outlet, 114.3 mm diameter for one outlet and 63.5 mm diameter for the others. The pressure of the hydrant are measured in the range 760 L/min~2,270 L/min for 63.5 mm outlet and 3,030 L/min~6,060 L/min for 114.3 mm outlet. Also, the numerical results of pressure drop are compared with the experiments to verify the accuracy and to analyze the of various valve shape of hydrant on the pressure drop. The engineering parameters, flow coefficients, are reduced from 181.57 to 136.35 ($L/min/kPa^{0.5}$) with inclined angle of disk from $0^{\circ}$ to $45^{\circ}$. These results are able to practical use for design hydrant to minimize pressure drop.

• Journal of the Korean Society of Costume
• /
• v.55 no.4 s.94
• /
• pp.138-150
• /
• 2005

Phrygia headgear has an important meaning from the perspectives of costume history and cultural exchanges in ancient times. This study is to investigate the prototype of Phrygia headgear through analysis of its manufacturing methods and styles on the basis of prior studies on ancient sculptures and literatures conducted by European researchers and to examine its history and meanings. In these ways, this study will be helpful in understanding the importance of Phrygia headgear in cultural exchanges between the East and the West. Results of this study can be summarized as follows: Phrygia headgear was orn by eastern tribes, so it was a symbol of those from the east in ancient times. Phrygia headgear is frequently found in Greek artistic works of 5th to 4th century BC that depicted eastern tribes. Also, this headgear can be observed in artistic works for Mithras, Attis, or other gods. Since Phrygia headgear's shape is similar to that of Homer's helm, many researchers believe that it might be originated from Homer's helm. This headgear made of oxen scrotum(stierbeutel) or its surrounding skin has a long end at the top. This long end is round and drooping toward the front side. From such unique shape, we top. This long end is round and drooping toward the front side. From such unique shape, we top. This long end is round and drooping toward the front side. From such unique shape, we can draw a conclusion that Phrygia headgear was made of oxen scrotum and its surrounding skin. Dependingy on drooping patterns, there are various shapes, such as the round, tightly swollen one worn by Mithras, the tongue-shaped one found in Basilika S. Apolinare Nuovo's mosaic depicting three wise men, the balloon-shaped one frequently found in Greek vases depicting Scythian, and the one drooping to the side depicted in Alexandersarkophag. Further, some Phrygia headgear has covers for neck and ears. For example, Phrygia headgear worn by Persian Satrap tribe has such covers attached to the head part. Meanwhile, Phrygia headgear worn by Amazone tribe does not show such separate covers, Rather, one piece of oxen skin was tanned and finished to make such covers. Wearing Phrygia headgear can be interpreted in several ways. Use of animal's skin for wearing things is a unique aspect in ancient societies because they believed that wearing animal skin would give them power of the animal. Further, Phrygia headgear made of oxen scrotum was a symbol of reproductive power to women.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.323-330
• /
• 2006

The morphology and somatic chromosome numbers of Korean Parasenecio were investigated to estimate their taxonomic values. Some morphological characters, such as the length of whole plants, the numbers of cauline leaves, the shapes of leaf and petioles, the numbers of involucral bracts, floret numbers per head, presence of trichomes on the style, ratio between wide part and narrow part of floret and the size of achene were found to be a good characters for delimiting each taxa. Based upon these characters, six taxa, Parasenecio auriculala var. auriculata, P. auriculata var. kamtschatica, P. hastata subsp. orientalis, P. koraiensis, P. firmus, P. pseudotaimingasa, were recognized about their distribution in Korea, but 2 taxa, P. adenostyloides, P. auriculata var. matsumurana, were needed to be studied their taxonomic position and distribution in Korea. The somatic chromosome numbers of six taxa, P. adenostyloides, P. auriculata, P. auriculata var. kamtschatica, P. hastata subsp. orientalis, P. firmus, P. pseudotaimingasa were 2n=60 and those of P. firmus and P. pseudotaimingasa were reported first in this study.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.17-25
• /
• 2012

Purpose: Recently, a three dimensional approach to hard and soft tissues of the maxillofacial area has been widely used. This study was to evaluate the reproducibility and accuracy of a stereocamera compared to actual measurement methods using a digital caliper and digitizer. Methods: The stereoscopies of 7 head dummies with different sizes and shapes were obtained using a Di3D system (Dimensional Imaging, Glasgow, UK) after marking reference points on facial areas. From the obtained stereoscopy, 10 measurements representing the width, height and depth of each of the facial sections of the dummy were measured twice using a three dimensional reverse engineering software program (RapidForm$^{TM}$ 2006, Inus, Seoul, Korea). The x, y, and z coordinates of each of the three dimensional measurements were obtained and distances between two points were calculated. All procedures were repeated twice. The actual measurement method was performed twice, directly on dummies, using a digital caliper and values were compared with the previously determined values. Results: The results were as follows. In the ANOVA analysis, there were no significant statistical differences among the three measurement methods. In the Bonferroni analysis, with adjustments applied for multiple comparisons, there was no difference between actual measurement methods using a digitizer and a digital caliper. However, there was some difference between using a stereocamera and actual measurement methods using a digitizer and a digital caliper in values of $Ex_{Rt}-Ex_{Lt}$, $En_{Rt}-En_{Lt}$, $Ala_{Rt}-Ala_{Lt}$, $Ch_{Rt}-Ch_{Lt}$, G-Pg', $Ala_{Rt}$-Prn, $Ala_{Rt}$-Prn. The mean value for technical error in measurement (TEM) in Di3D (0.98 mm) was slightly higher than for a digital caliper (0.17 mm) and a digitizer (0.30 mm). In an intraclass correlation coefficient (ICC) there were no significant differences among the three measurement methods, but the Di3D system with the stereocamera showed relatively lower reproducibility compared to actual measurement methods using a digitizer and a digital caliper. Conclusion: These results indicate that some complementary measures may be needed to improve accuracy and reproducibility in the Di3D system with stereocamera.