• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.72-77
• /
• 2008

This study was carried out to determine the response of the rice yield and grain quality by rice leaf folder (RLF, Cnaphalocrocis medinalis G.) and identify the damages caused by different transplanting dates, nitrogen amounts and chlorophyll amounts (SPAD value) of rice leaf. As the damage degree of RLF was getting severer, the ripened grain rate and 1000-grain weight were decreased and due to the increasing of chalky rice rate the rate of head rice was reduced. Therefore, the yield of head rice was decreased by 36% in heavily damaged rice plant. Among the physicochemical characteristics, protein content of rice grain was increased but amylose content was reduced, consequently, the palatability was deteriorated in heavily damaged rice by RLF. The degree of damage of RLF was getting serious as transplanting date was delayed and as the amount of nitrogen was increased. In the relationship between the SPAD value and the damage degree of RLF, as the SPAD value was increased by nitrogen fertilizing, the damage degree was also increased exponential functionally.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.1
• /
• pp.21-27
• /
• 2000

In order to investigate the changes of rice qualities during 4 years storage of paddy in warehouse of normal temperature condition. As storage period go by, head ratio was deduced and broken rice was increased according as a change of temperature during the long term storage. A color of rice was became more dark gray than that of entering time as L value was decreased from 64.07 to 61.62 a 4 years late. As a results of studies on the cooking quality of milled rice, water uptake ratio and expanded volume were increased in proporation to storage period, wherease total solids and iodine blue value were decreased. In the characteristic of texture of cooked rice, viscosity/hardness ratio(-H/H) had a decreasing tendency, while adhesiveness and cohesiveness increased with increased storage time. The qualities of cooked milled rice studied were sensory attributies of odor, taste, stickiness and appearance which were evaluvated by multiple comparsion method. The sensory results showed that all of descriptions were deterirated with a increased storage period. The taste and stickiness were changed from good score to bad score a 2 years later.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.44-46
• /
• 2008

This study was carried out to observe the quality of commercial brand rices collected from Gyeongbuk Province, Korea in 2006-2007. Rice quality was analyzed as a mixed ratio with other varieties by DNA analysis, physicochemical and appearance characteristics among 26 commercial brand rices. In protein contents of rice grain, 12 brand rices were lower than 6.5%, 6 brand rices were ranged 6.6-7.0%, and others were higher than 7%. In head rice rates, 2 brand rices were higher than 95%, 4 brand rices were ranged 90-94%, and other brand rices were lower than 90%. In distribution of the mixed ratio with other varieties, 12 commercial brand rices were ranged 1- 10%, 9 commercial brand rices were ranged 11-20%, and 5 brand rices were lower than 20% of mixed ratio.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.199-206
• /
• 2004

Typhoon "MAEMI", happened in September 2003, hit the great damage to Gyeongnam province area. Especially, rice plant was lodged or severe leaf damage was caused. This study was conducted to find out the extents of leaf damage among different rice cultivars, and to evaluate rice yield and eating quality due to leaf damage after typhoon. Rice cultivars torn off over half of the flag leaf length (FLL) were one medium-late maturing cultivar (Donginl), medium maturing cultivar (Yeonganbyeo), eight early maturing cultivars (Samcheonbyeo, Jounghwnbyeo, Munjangbyeo, Taebongbyeo, Odaebyeo, Samhaegbyeo, Sobaegbyeo, Sinunbongbyeo), two long-il type cultivars (Samgangbyeo, Namcheonbyeo), and three special use cultivars (Heukseonchalbyeo, Jinbuchalbyeo, Yangjobyeo). Cultivars torn off below 1/10 FLL were eight medium-late maturing cultivars (Chucheongbyeo, Daecheongbyeo, Saechu cheongbyeo, Donganbyeo, Daeyabyeo, Hwamyeongbyeo, 방eongsanbyeo, Dongjinbyeo) and two medium maturing cultivays (Donghaebyeo, Gumobyeo2). The rest cultivars were tore off by 1/10∼1/2 ELL. In yield components, the longer was flag leaf damage, the lower was ripened grain ratio, grain weight and brown/rough rice ratio, which was severly impacted to late than to ordinary season cultivation. However, rice yield did not decrease up to tearing by 1/10 ELL. Head rice ratio decreased from flag leaf tearing over 1/10 ELL in late season cultivation. The longer was flag leaf damage, the lower was eating quality, which could not show significantly different.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.521-524
• /
• 2016

This study aimed to examine variations in the texture profile analysis (TPA) of cooked rice in relation to the instrumental parameter conditions. The TPA of four types of ready-to-eat, white rice products was conducted in two levels of compression ratio (30 and 70%) and cross-head speed (0.5 and 1.0 mm/s). The properties of the four rice products significantly or non-significantly differed, depending on the instrumental parameter condition. Agglomerative hierarchical clustering, based on the five TPA properties such as hardness, adhesiveness, cohesiveness, chewiness, and springiness, revealed that clustering of the four rice products varied with the instrumental parameter condition. Additionally, the ratio of adhesiveness to hardness, an index of rice texture quality, showed a variation depending on the two instrumental parameter conditions. In conclusion, our findings demonstrate that the texture profile, texture-based sample clustering, and the ratio of adhesiveness to hardness vary with the compression ratio and cross-head speed in the TPA.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.4
• /
• pp.347-352
• /
• 2008

This study was carried out to estimate the quality of Jeonbuk-originated brand rice by comparing with other domestic brand rices and imported market rices. Rice variety, "Ilmi" was a major portion of brand rices in Jeonbuk region, and in few portion, there were variety-mixed brands, Shindongjin, Kosihikari, and Hitomebore. Comparing the ratio of head rice of high-quality Jeonbukoriginated brand rice with other domestic brand rices were not significantly different. Head rice ratio and mechanical taste values were not significantly different between high-quality Jeonbuk-originated brand rice and the other domestic brand rices. The contents of protein, moisture, amylose of rice were also not significantly different between them. The quality of high-quality Jeonbuk-originated brand rice was as good as that of other domestic brand rices and had not changed it by period. The foreign rice imported from United States, Chinese (involved parboiled), Thailand and the domestic rice cultivated in Jeonbuk province were investigated. There could get difference on the major component related to palatability of rice as country in this study. Comparing with foreign rices. protein content of domestic rice (6.1%) was similar with that of United States, lower than those of Chinese and Thailand. The head rice ratio of the domestic rice was 92%, which was similar with those of Unite State and Chinese but the Chinese parboiled rice was completely cracked during processing. The setback viscosity of domestic rice related to retrogradation was lower than those of the imported rice except United States. The Ad (Adhesiveness / H(Hardness) ratio was higher in the domestic and United States rice.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.244-250
• /
• 2008

The purpose of this study was to measure fundamental data required for the prediction of milling ratios, and to develop regression models to predict the head rice ratio of milled rice using NIR spectra of hulled rice. A total of 81 rice samples used in this study were collected from Jeongeup, Jeonbuk province in 2006. NIR spectra were measured using one mode of measurement, reflection. The reflectance spectra were measured in the wavelength region of 400-2500 nm with an NIR spectrophotometer "NIRSystems 6500" (Foss, Silverspring, USA). Calibration equations were developed by the modified partial least squares (MPLS), partial least squares (PLS), and principal components regression (PCR). Math treatments were 1-4-4-1, 1-10-10-1, 2-4-4-1, and 2-10-10-1. The software used was WinISI (Infrasoft International, State College, USA). Automatic head rice production and quality checking system used was "SY2000-AHRPQCS" (Ssangyong, Korea). The calibration was made with the first derivative and the spectrum designated was in 8 nm interval. The determination coefficients of head rice ratios were 0.8353, 0.8416 and 0.5277 for the MPLS, PLS and PCR, respectively. Those obtained with 20 nm interval were 0.8144, 0.8354 and 0.6908 for the MPLS, PLS and PCR, respectively. The calibration was made with second derivative that spectrum designated was 8 nm in interval. The determination coefficients of head rice ratios were 0.7994, 0.8017 and 0.4473 for the MPLS, PLS and PCR, respectively. Those with 20 nm interval were 0.8004, 0.8493 and 0.6609 for the MPLS, PLS and PCR, respectively. These results indicate that the accuracy of determination coefficient for MPLS and PLS is higher than that of PCR.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.261-261
• /
• 2017

This study was carried out to provide basic data for spreading rice direct seeding by inducing stabilization of seedlings, yield and quality according to sowing times in rice direct seeding cultivation. In 2016, 'Sukwang' was seeded 3 times by 10 days interval on May. 10, 20, 30 and 6kg/10ha of seeding rate respectively in Iksan. In summary, the number of rice seedling establishment was higher than the optimum seedling establishment level at all sowing periods and the seeding rate was better as the sowing period was delayed. Weed development by sowing was the highest at early sowing, May 10, and decreased at late sowing. Heading dates were delayed by 3days for sowing on May 10, 7days for sowing on May 20, and 11 days on sowing on May 30. Rice yield increased with the delay sowing time and compared to the transplanting. It was 84% in sowing on May 10, 94% in sowing on May 20, and 99% in sowing on May 30. In addition, head rice ratio and head rice yield increased according to delayed of seedling.