• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.317-317
• /
• 2017

We performed this experiment to select high quality rice adapted to wheat-rice double cropping system. We sowed barley and wheat seed in November 2, 2015. After harvesting barley and wheat, we transplanted high quality rice cultivars: 'Unkwang', 'Hopun', 'Haepum', 'Hyunoum' in June 17 and 24. We used 'sindongjin' rice as a control. As a result, 'Hyunpum' had a highest head rice yield regardless of transplanting date. Head rice yield of 'Hyunpum' was 488.1kg/10a when transplanted in June 17, and 453.6kg/10a when transplanted in June 24. The reason for this highest head rice yield was not percentage of head rice but milled rice yield. Milled rice yield of 'Hyunpum' was 526.5kg/10a when transplanted in June 17, and 490.0kg/10a when transplanted in June 24. Percentage of head rice had little differences between rice cultivars. Among yield components, only number of panicle per $m^2$ had an effect on the differences of yield between rice cultivars. The other yield components didn't have an effect on the differences of yield between rice cultivars. Compared to June 17, only 'Unkwang' had higher head rice percentage and head rice yield in June 24. Head rice percentage of 'Unkwang' changed from 67.3% to 85.0% and head rice yield changed from 324kg/10a to 393.8kg/10a when transplanting date delayed from June 17 to June 24. When transplanting date was delayed, heading date of 'Unkwang' was more delayed than other rice cultivars. By delay of heading date, mean temperature for 40days changed from $25.0^{\circ}C$ to $22.9^{\circ}C$ which improved temperature condition during grain filling stage. This improved head rice percentage and head rice yield of 'Unkwang' transplanted in June 24. If transplanting date is more delayed than June 24, 'Unkwang' could have higher head rice percentage and head rice yield. Therefore, if you transplant rice before June 24 in rice-wheat double cropping system, 'Hyunpum' is recommended as adequate rice cultivar. But if you transplant rice after June 24, further research is needed to find out adequate rice cultivar.

• Journal of Biosystems Engineering
• /
• v.5 no.2
• /
• pp.1-14
• /
• 1980

This study was carried out to investigate the effects of the counter-pressure setting and the roller speed of a rice whitening machine on the head rice recovery. milling capacity and milling efficiency, and also to find out the optimum operational conditions of the machine. The radial pressure inside the whitening chamber and the outlet axial pressure were measured to study their relationships with the head rice recovery, milling capacity and milling efficiency. The results of the study are summarized as follows. (1) The most important factor in rice whitening was the counter-pressure setting. It significantly affected the head rice recovery. (2) The roller speed significant affected the milling capacity and milling efficiency , but it did not affected the head rice recovery. (3) Both the radial pressure and the outlet axial pressure were affected by the counter-pressure setting but not by the roller speed. Both of them increased almost linearly with the counter-pressure setting. There was a significant correlation between the radial pressure and the outlet axial pressure. (4) The flow rate through the whitening chamber when the feed gate was fully opened increased with the roller speed, but it was not affected by the counter-pressure setting. (5) The head rice recovery decreased as the counter-pressure setting increased , but it was not affected by the roller speed. The reason could be explained by the fact that the radical pressure increased only with the counter-pressure setting. (6) The milling capacity increased with the counter-pressure setting and linearly with the roller speed. The milling efficiency generally increased with both the counter-pressure setting and the roller speed. However, the effect of roller speed was negligible at the higher counter-pressure setting. The temperature rise inside the whitening chamber was moderate with the mean of 11.3℃ (range 5.6-18.3℃) even though it increased slightly with the roller speed. Considering the head rice recovery and milling efficiency, the optimum operational conditions of the machine appeared to be the counter-pressure setting of 67g/㎠ and the roller speed of 1,050rpm. Neglecting the small difference in the head rice recovery , the greater milling capacity could be obtained at the counter-pressure setting of 85g/㎠ with the roller speed of 850-1050rpm.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.29-32
• /
• 2005

This experiment aimed to estimate the effect of imperfect rice on rice palatability. Rice cultivar, Ilpumbyeo, was cultivated by direct-seeding on flooded paddy surface with 11 kg/10a nitrogen application. Palatability of harvested rice was measured by NIR spectroscope. Brown rice was divided according to their appearance namely, perfect, discolored, green-kerneled, and immature opaque with a composition ratio of $75.7\%,\;11.0\%,\;8.0\%,\;and\;5.3\%$ respectively. When the perfect brown rice was milled, the grain were composed of head, cracked, and white core & belly, at $64.7\%,\;25.3\%\;and\;10.0\%$ respectively. The milled rice of discolored brown rice had similar composition with the perfect rice. The milled green-kerneled vice, on the other hand, had $36\%$ head rice and $64\%$ white core & belly rice. The immature opaque brown rice, when milled, had $25.3\%$ white core & belly and $74.7\%$ damage & opaque rice. With the respect to grain quality, the viscosity of white core at belly rice and damaged & opaque rice was lower than that of head rice. In contrast, their protein content was a little higher than that of head rice. The palatability value of pure imperfect rice was much lower than head rice. The palatability value of damaged & opaque rice was the lowest among the imperfect rices. When mixed with head rice, the damaged & opaque rice impacted on the deterioration of vice palatability. Mixing $1\%$ each of white core at belly rice and damaged h opaque rice decreased the palatability value by $5\%$ as compared with the head rice.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.76-86
• /
• 1979

This study was conducted to find out the effects of rainfall occurring during the paddy sun-during process of traditional paddy harvesting operations on the quality of milld rice. Rice varieties used for the experiment were MINEHIJARI variety a japonica and SUWEON 264 vareity , a sister-line of TONG-IL . Sun-drying days after the paddy cutting, times of storm occurrance during sun-drying period, and storm duration were treated as variables. The results is summarised as follows : 1. Brown rice recovery exposed to rainfall during the sun-druing period were ranged 81.6-82.1% and 79.4-80.2% for MINEHIKARI and SUWEON 264 varieties, respectively. which showed negligible effect by rainfall. 2. Milling recovery of MINEHIKARI variety was not affected by storm duration but by the by the sun-drying days after cutting as the sun-drying days increased to eight and four days when the variety met the rainfall one and two times, respectively. The range of milling recoveries of MINEHIKARI variety were 75.18-74.07% and 75.24-73.46% as the variety met the rainfall one and two times, respectively, and it were estimated that up to 0.9% and 1.5% of milling recovery would be reduced by one and two times of rainfall during sun-drying period. 3. The milling recovery of SUWEON 264 variety was affected only by the increase of drying days after cutting when it met one time of rainfall during the sun-drying period, while it was begun to reduce by the storm duration more than 11hours as the drying paddy met two times of rainfall. The milling reveries of the paddy met one and two times of rainfall were ranged 74.24-73.21% and 74.02-72.36% which were estimated to be reduced up to 0.9 % and 1.8% by the increase of the drying days after cutting and storm duration , respectively. 4. The head rice recovery of MINEHIKARI rice variety showed notable decrease as the drying days after cutting increased, and also it was greatly reduced even by the five hours of storm duration when one time of rainfall occurred but it was not affected by storm duration when the rainfall occurred two times. Head rice recoveries of MINEHIKARI met one and two times of rainfall during the sun-drying period were 65. 15 -40.85% and 61.86 - 30.03 %, which showed terrible reduction as much as up to 25% and 35% compared to that which did not met rainfall during the sun-drying process. 5. Head rice recovery or SUWEON 264 variety was very much reduced as the sum-drying days after cutting increased. Storm duration less than five hours during the sun-drying process did not affect on the decrease of head rice recovery when the variety was exposed to one time of rainfall, while storm duration affected considerably on the reduction of head rice recovery of SUWEON 264 variety exposed to two times of rainfall. The range of head rice recovery, 56.43 - 33.94% and 51.28 - 21.03% , for the paddy exposed to rainfall one and two times were evaluated that up to 24% and 37% of reduction in head rice recovery would be brought about compared to the head rice recovery of the sundriedpaddy that did not met the rainfall.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.75-75
• /
• 1979

This study was conducted to find out the effects of rainfall occurring during the paddy sun-during process of traditional paddy harvesting operations on the quality of milld rice. Rice varieties used for the experiment were MINEHIJARI variety a japonica and SUWEON 264 vareity , a sister-line of TONG-IL . Sun-drying days after the paddy cutting, times of storm occurrance during sun-drying period, and storm duration were treated as variables. The results is summarised as follows : 1. Brown rice recovery exposed to rainfall during the sun-druing period were ranged 81.6-82.1% and 79.4-80.2% for MINEHIKARI and SUWEON 264 varieties, respectively. which showed negligible effect by rainfall. 2. Milling recovery of MINEHIKARI variety was not affected by storm duration but by the by the sun-drying days after cutting as the sun-drying days increased to eight and four days when the variety met the rainfall one and two times, respectively. The range of milling recoveries of MINEHIKARI variety were 75.18-74.07% and 75.24-73.46% as the variety met the rainfall one and two times, respectively, and it were estimated that up to 0.9% and 1.5% of milling recovery would be reduced by one and two times of rainfall during sun-drying period. 3. The milling recovery of SUWEON 264 variety was affected only by the increase of drying days after cutting when it met one time of rainfall during the sun-drying period, while it was begun to reduce by the storm duration more than 11hours as the drying paddy met two times of rainfall. The milling reveries of the paddy met one and two times of rainfall were ranged 74.24-73.21% and 74.02-72.36% which were estimated to be reduced up to 0.9 % and 1.8% by the increase of the drying days after cutting and storm duration , respectively. 4. The head rice recovery of MINEHIKARI rice variety showed notable decrease as the drying days after cutting increased, and also it was greatly reduced even by the five hours of storm duration when one time of rainfall occurred but it was not affected by storm duration when the rainfall occurred two times. Head rice recoveries of MINEHIKARI met one and two times of rainfall during the sun-drying period were 65. 15 -40.85% and 61.86 - 30.03 %, which showed terrible reduction as much as up to 25% and 35% compared to that which did not met rainfall during the sun-drying process. 5. Head rice recovery or SUWEON 264 variety was very much reduced as the sum-drying days after cutting increased. Storm duration less than five hours during the sun-drying process did not affect on the decrease of head rice recovery when the variety was exposed to one time of rainfall, while storm duration affected considerably on the reduction of head rice recovery of SUWEON 264 variety exposed to two times of rainfall. The range of head rice recovery, 56.43 - 33.94% and 51.28 - 21.03% , for the paddy exposed to rainfall one and two times were evaluated that up to 24% and 37% of reduction in head rice recovery would be brought about compared to the head rice recovery of the sundriedpaddy that did not met the rainfall.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.325-325
• /
• 2022

In order to developing high-quality rice varieties and processing varieties, systematic and stable evaluation of physicochemical properties is required for breeding lines. In this study, we compared the quality characteristics evaluation results of rice breeding lines for cooked rice, special rice, and whole crop silage rice adapted to central plain region (Suwon) in order to use as basic data for future rice variety development. Brown rice length/width ratio, head rice ratio, protein content, amylose content, alkali digestion value(ADV) and Toyo value were analyzed to evaluate the quality characteristics of yield trial lines cultivated in Suwon for four years (2017-2020). Brown rice length/width ratio, head rice ratio, protein content, ADV and Toyo values showed significant differences by year, but there was no significant difference in amylose content (p<0.05), which showed little environmental variation. The head rice ratio and Toyo value showed an increasing trend, while the protein content showed a decreasing trend. However, the protein content was the highest in 2020, which is thought to be owing to little sunlight hours due to heavy rainfall in 2020. The protein content of whole crop silage rice was 8.1%, which was significantly higher than that of other lines (p<0.05). Toyo value of medium-maturing and early-maturing lines were 67.6 and 73.7%, respectively, and the Toyo value of medium-maturing lines was higher than that of the early-maturing lines (p<0.05). In correlation analysis among the quality characteristics of the rice lines for cooked rice, significant positive correlations were detected between Toyo value and head rice ratio, amylose content, ADV, and a negative correlation was observed between Toyo value and protein content (p<0.05).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.1
• /
• pp.1-6
• /
• 2012

In this study, we conducted to identify predictive parameters affecting the head rice ratio for developing high quality rice cultivar adaptable to the early-transplanting cultivation. The recombinant inbred lines (RILs) population from a cross between the parents of Pungmi and Koshihikari was used for test materials. Variations were observed in most of the measurements, eg culm length (ranging from 51.0 cm to 97.0 cm), amylose content (14.0~20.1%), protein content (5.2~7.4%), pasting properties (peak viscosity, 227.2~309.8 RVU) and head rice ratio (67.7~96.7%). Significant correlations between head rice ratio versus culm length (0.443) and head rice ratio versus protein content (-0.458) were detected in RIL population. However, culm length was negatively related to lodging tolerance. In order to develop a commercially suitable cultivar, selection for short culm and high head rice ratio of rice grains with physiochemical properties such as protein content, amylase content and taste value should be considered. This results can be used to increase the efficiency of breeding program for developing a new early-maturing rice variety adaptable to early transplanting cultivation in Korea.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.1-8
• /
• 1979

This study was carried out to investigated the actual state of rice milling at local milling plants and to find out sources for elevating their milling recoveries in both quantity and quality. At 36 local milling plants located in Gyeongnam and Jeonnam , milling recoveries and head rice recoveries were measured with respect to their different milling systems and rice varieties. Then, the same samples of rice were milled by experimental milling equipments at laboratory, and the two experimental results were compared in order to determine the amount of milling recovery possibly to be increased. The results of this study are as follows ; 1. Milling recoveries of rice at local milling plants were proved to have no relationship with milling systems, and were 68.1% per ent and 72.6percent on an average with new variety and native variety, respectively. 2. The milling recoveries above stated can be elevated 4.5 percent and 2.9percent with new variety and native variety, respectively, by developing and extending technologies of manufacturing and handling rice milling machinery. 3. The head rice recovery of new variety at local milling plants has insignificant differences among milling systems, and was 54.8 percent on the average. With native variety, the recovery by friction type rice polisher was 0.9percent higher than that of friction-abrasive type polisher, and was 64.9 percent on the average. 4. The head rice recoveries of new variety and native can be elevated 5.1percent and 3.9percent, respectively, by the same stimulation above mentioned.