• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.1952-1966
• /
• 1994

The body segment parameters of twelve young male Korean were measured to compare with the results of foreign cadaver studies. A human body was assumed to have fourteen body segments. The mass of each segment was measured with a water immersion test and the mass center of a segment was determined on the balance platform by changing postures. In the case of Korean, because of the difference in body proportion, the mass center of whole-body is located further from the distal end of head(Korean : 44.9% vs. Caucasian : 41.2%), and the mass center of each segment also located in different proportional locations. The existing regression equations, which can estimate segment mass based upon the anthropometric dimensions, estimates segment mass (the mass of shank) for Korean with 13% error. Therefore, it is not recommended to estimate the mass, and the moment of inertia of body segment of Korean based on the existing equations. However, the density information of body constituents was similar enough to apply it to Korean density. It was validated by the comparison between the results of the direct immersion method and 3-dimensional volume reconstruction of segment form the cross sectional images of CT-scan. The average body density measured form twelve subjects was $1.035{\;}kg/m^3$ and showed deceasing trendency.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.3
• /
• pp.38-46
• /
• 2024

Due to its good repeatability and reproducibility, sled test is an effective way to study the occupant behavior during car crash but sled test is not suitable to simulate long term events (>1000 msec) such as autonomous emergency braking (AEB) which accompanies over 1 second of braking stage before crash. The behavior of dummies at different AEB levels are assessed using the Hybrid-III 50% male dummy and 5% female dummy FE models. Behavior of dummies are studied at different postures like normal posture, relaxed posture, and long-sliding relaxed posture. Dummy behavior from prepositioning (presetting the dummy as dummy will be positioned after AEB activation) and that from full event simulation which includes AEB activation as well as crash will be compared to check the effectiveness of prepositioning. Furthermore, based on the observation that the forward excursion of dummy head remains at a certain level with the lapse of time, we evaluated the applicability of time-shortened pulses method as well. Prepostioning method can be applied to normal posture, but it is not applicable to the relaxed posture, and it is confirmed that it can be corrected by applying the time-shortened pulses method.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.305-315
• /
• 1996

This study was performed to investigate the changes of head posture according to natural standing or sitting posture. Twenty seven healthy dental students without any signs and symptoms of temporomandibular disorders participated in this study. Cervical resting posture (CRP) of the head in sagittal plane was measured by Cervical-Range-of-Motion $^\textregistered$(CROM, U.S.A.) and lateral cephalograph was taken in natural posture. The items related to angle in cephalograph were the angles of cranial and cervical inclination to true vertical line(VER/NSL, VER/AML), the angles of cervical inclination to nasion-sella line(CVT/NSL, OPT/NSL), the angles of comical inclination to horizontal line(CVT/HOR, OPT/HOR), the angle of cervical lordosis(CVT/OPT). The items related to line measurement were the distance from subocciput to Cl(Dl), Cl to C2(D2), C2 to C3(D3), C3 to C4(D4), the upper(PNS to posterior pharyngeal wall) and the lower(tongue base to posterior pharyngeal wall) pharyngeal space, the distance from nation to mention(Na-Me), and the radius of comical curvature from the first comical vertebra(Cl ) to the fifth cervical vertebra(C5). The data were analyzed with SAS/STAT program. The obtained results were as follows : 1. Most items related to angular measurement showed significant difference between in standing and sitting posture. The angles of CRP, CVT/NSL, OPT/NSL, CVT/HOR, OPT/HOR, and CVT/OPT were high in sitting posture, but the angles of VER/NSL, VER/NSL were low in sitting posture. 2. In vertebral distance, only the distance between C3 and C4 was differed by the posture, which decreased in sitting posture. In sitting posture, the distance from nasion to menton(Na-Me) was longer, but the radius was shorter than in standing posture. 3. Correlationship in angular measurements was almost same in both postures. Ceervical resting posture(CRP) was correlated with VER/NSL, VER\ulcornerNSL was correlated with CRP, CVT/NSL, and OPT/NSL, VER/AML was correlated with CVT/HOR, OPT/HOR, CVT/OPT, and the angle of cervical lordosis(CVT/OPT) was correlated with the radius. 4. Correlationship in linear measurement was observed only in among D3, D4, and radius. And the Na-Me was not correlated with any other items. From this results, The author concluded that the head posture in sitting was mote backward extended than in standing.

• Journal of the Korean Society of Radiology
• /
• v.8 no.2
• /
• pp.89-96
• /
• 2014

This paper tries to examine whether the application of joint mobilization to subjects who have the forward head posture due to malalignment in the cervical joint has influence on posture changes and functions in the cervical joint. The subjects were 39 students from G University in Gyeongsangbuk-do. The cervical joint mobilization was applied to 20 subjects and not to 19. The students with a cervical lordosis angle of $21^{\circ}C$ or less, an anterior weight bearing (AWB) of 15mm or greater, and a cervical extension ROM of $70^{\circ}C$ or less in terms of radiography were selected as subjects under their voluntary agreement. The patients actively performed the joint mobilization slowly 8 times per session while therapists continuously applied sustained accessory glide to their painful joints 3 times per week for 4 weeks along with the cervical expansion and flexion in SNAGS among other Mulligan's (1995) techniques. The measurement was carried out in terms of radiographic inspection and neck disability indexes. As a result of the experiment, it turned out that the subjects with the forward head posture had changes in the cervical AWB and ARA, the ranges of expansion and flexion, and the NDI(Neck Disability Index) after the intervention for the experimental group by applying cervical joint mobilization. There were no changes observed in the control group. In conclusion, the application of joint mobilization turned out to have influence on the improvement of cervical joint postures, and craniocervical region functions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.4
• /
• pp.553-562
• /
• 2010

This survey investigates the conditions of summer working uniforms for contracted foodservice workers. The data were obtained from 67 workers through in-depth interviews (July 2005~October 2005). The results of study are as follows: The working environment changed to menu and cooking method (air temperature $28\sim37^{\circ}C$, humidity 72~86 %RH, radiant temperature $27\sim37^{\circ}C$, air velocity 0.14~0.37m/sec). They answered that the working environment has high temperatures, humidity, excessive noise, and liability to slide. The typical accidents were burns, cuts, slide, and ligament injuries in the workplace. Work duties consisted of cooking, serving food, washing, and cleaning up leftover food. All the employees carried out multi tasks. The primary working postures and motions were standing, crouching, and lifting. The female workers usually wore underwear (panty and brassiere), upper and lower work wear, aprons, waterproof-aprons, cotton-gloves, rubber-gloves, socks, and rubber-boots. The satisfaction of the uniform was relatively low for trousers and waterproof-aprons. The answer about the fit was generally "comfortable." They answered "back," "chest," and "head" were wet with perspiration during work. The uncomfortable parts were the crotch and neck. Questions concerning their satisfaction with the material of uniforms indicated a high rate of dissatisfaction, particularly for ventilation and absorbency. In case of the colors of the working uniform, workers preferred white color for the upper part, and black color for the lower part.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.12 no.1
• /
• pp.57-67
• /
• 2006

Musculoskeletal neck dysfunction syndromes are common in outpatient musculoskeletal pain practice. The underlying musculoskeletal and neurologic causes of pain are variable. In the management of these patients, it is important to accurately identify and treat these pain generators to optimize patient outcome. It is the purpose of this review to discuss three main categories of functional anatomy, the role of superficial/deep muscular system and the scientific evidence for optimal physical therapy intervention for cervical dysfunction. Specifically there is evidence of lowered microcirculation in the upper trapezius muscle, morphological signs of disturbed mitochondrial function which appears to be limited to type I fibers and an increased cross-sectional area of type I muscle fibers despite a lower capillary to fiber area ratio. In acute neck pain syndrome, changes in muscle activity of painful muscles may result from segmental and supraspinal inhibitory effects. Muscle activation is closely related to the control of joint movements and postures and it is difficult to separate the influence of the two components. Both the altered muscle recruitment patterns and altered kinematics appear to be a poor adaptation for pain of the head - neck region, as they are likely to result in increased compressive loading in the cervical spine, affecting muscles, articular structures such as zygapophyseal joints, connective tissues and neural tissues which are all peripheral generators of referred pain. The rectus capitus posterior minor muscle shows that it is one of the most important muscles of the suboccipital region. In this article, i reviewed the anatomy, neurophysiology, function and dysfunction as well as the treatment of cervical dysfunction.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.197-204
• /
• 2019

Objective: The purpose of this study was to identify the effect of high-heels (HH) modification on metatarsal stress in female workers. Method: Seven females who work in clothing stores ($heights=160.4{\pm}3.9cm$; $weights=47.4{\pm}4.1kg$; $age=31.3{\pm}11.1yrs$; $HH\;wear\;career=8{\pm}6.5yrs$) wore two types of HH (original and modified). The modified HH had been grooved with 1.5 cm radius and 0.2 cm depth around the first metatarsal area inside of the shoes using the modified shoe-last. Participants were asked to walk for 15 minutes on a treadmill and to stand for 10 minutes with original and modified HH, respectively. Kinetics data were collected by the F-scan in-shoe system. After each test, participants were asked to rate their perceived exertion using the Borg's 15-grade RPE scale and interviewed about their feeling of HH. Nonparametric Wilcoxon signed-rank test and effect size (Cohen's d) were used to determine the difference of the variables of interest between the original and modified HH. Results: In the present study, modified HH of the peak contact pressure of 1st metatarsal (PCP) left, PCP right, pressure time integral (PTI) left, peak pressure gradient (PPG) left during standing and PPG right during walking are greater than original HH. And even it didn't show statistically significant, the average in all pressure values of modified HH showed bigger than original HH. It surmised to be related to awkward with modified HH. Even though they said to feel the comfortable cause of big space inside of HH in the interview, they seemed to be not enough time to adapt with new HH. So their walking and standing postures were unstable. Conclusion: Modified the fore-medial part of HH can reduce the stress in the first metatarsal head and big toe area during standing and walking.

• PNF and Movement
• /
• v.18 no.3
• /
• pp.403-414
• /
• 2020

Purpose: This study examined how performing chin tuck exercises in supine, sitting, and standing positions affects changes in the muscle activity of the neck and shoulder. Methods: Seventeen men and three women with forward head posture participated in the study. The subjects performed the chin tuck exercise using a pressure biofeedback unit. After determining the ideal order for performing the chin tuck exercise in supine, sitting, and standing positions through randomized controlled trials, muscle activity was measured in the dominant-side sternocleidomastoid, scalenus anterior, upper trapezius, and levator scapulae. Muscle activity was measured three times in each muscle for each position, and the average of the three measurements was used for analysis. Results: In this study, the chin tuck exercise performed in a supine position reduced muscle activity of the sternocleidomastoid, scalenus anterior, upper trapezius, and levator scapulae significantly more than performing the exercise in either sitting or standing positions (p < 0.05). No significant difference in muscle activity was observed when the exercise was performed in a sitting position versus a standing position (p < 0.05). Conclusion: Performing a chin tuck exercise in a supine position is more effective for stabilizing the neck and shoulder than performing it in a sitting or standing position, as it reduces excessive tension and fatigue in the neck and shoulder.

• Journal of the Korean Society of Physical Medicine
• /
• v.19 no.1
• /
• pp.61-68
• /
• 2024

PURPOSE: This study aimed to provide basic clinical data by analyzing the impact of motion observation training and stretching exercises for improving postures on the neck alignment and balance of stroke patients to enable them to accurately recognize the correct exercise method. METHODS: After sampling 20 stroke patients who met the selection criteria, this study randomly assigned 10 people who were administered the stretching exercise with observation training to the experimental group and 10 who received only the stretching exercise intervention to the control group by drawing lots. Next, neck alignment and balance were pre-tested. All interventions were conducted for 30 minutes, 3 times a week for 4 weeks, and when all the interventions were completed after 4 weeks, neck alignment and balance were re-measured in the same way as the pre-test. RESULTS: The comparison of changes in neck alignment and balance within the experimental and control groups showed statistically significant differences in the craniovertebral angle, cranial rotation angle, and balance (p < .05) (p < .01). Between the groups, statistically significant differences were found in the craniovertebral angle, cranial rotation angle, and balance (p < .05) (p < .01). CONCLUSION: A statistically significant difference in neck alignment and balance was observed in the group that underwent stretching exercises combined with observational training and a statistically significant difference was found between the groups. Therefore, it is believed that observation training should be used in clinical practice to improve forward head posture and restore balance in stroke patients.