• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.609-614
• /
• 2008

The heating and cooling performance of system multi-air conditioner under high-head and long-line conditions are experimentally investigated. The maximum head and tube length were 110 m and 1000 m, respectively. The experimental system was composed of 4 outdoor units with module systems, and 13 indoor units which were joined with the mode change unit by single-tube circuit. Field tests without indoor and outdoor temperature control were performed in a general office building with 22 different working conditions. Experimental results were prepared on the p-h diagram. Also the oil level in the compressor was normally maintained at the safety zone for the system multi-air conditioner with high-head and long-line conditions.

• 한국콘텐츠학회논문지
• /
• 제8권11호
• /
• pp.235-241
• /
• 2008

두경부 종양에서 표적용적(target volume)을 하나의 조사야로 포함하지 못하는 경우는 조사야를 둘, 또는 그 이상으로 접합시켜 방사선치료를 시행한다. 방사선치료 시 두 조사야 경계면에서 균등한 선량을 부여하는 것이 매우 중요하다. 하지만 환자의 외형적인 인자나 전신 상태에 따라 피부 접합면( skin Junction area)의 불일치가 발생할 수 있으며 이로 인한 접합면에서의 과선량 또는 저선량 영역이 존재할 수 있다. 본 연구는 두경부 종양의 측면 조사면 끝단 차폐물(edge block)을 회전 가변형으로 제작하여 피부 접합면에 균등한 선량을 부여할 수 있는 치료 기술에 대하여 연구하였다. 모의치료에서 전방 상쇄골 하림프절(supraclavicle lymph node)의 중심선을 우측방 조사야 하단과 접합면으로 하여 회전 가변형 차 폐물을 이용하여 변형되는 거리와 회전각을 측정하였다. 연구 결과에서 원발병소와 상부 경부 림프절 우측방 조사야의 하단에서 회전 가변형 차폐물의 변형 거리는 Y축 중심선에 수직인 ${\pm}$10cm 거리에서 2mm 이내 였으며, 회전각은 평균적으로 약 1.28도의 회전 변형이 발생하였다. 하지만 조사면 끝단 차폐물을 회전 가변형으로 제작함으로서 기존에 발생하던 피부 접합면에서의 불일치를 최소화 할 수 있었다. 두경부 종양의 경우는 원발병소와 상, 하부 경부 임파절에 적절한 선량을 부여하기 위한 조사면 끝단 차폐물을 이용한 방법이 임상에서 적용할 수 있는 효율적인 방안이라 사료된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1875-1878
• /
• 2005

It is not efficient and scarcely out of the question to use commercial expensive electron beam lithography system widely used for semiconductor fabrication process for the manufacturing application field of various devices in the small business scope. Then scanning electron microscope based electron beam machining system is maybe regarded as a powerful model can be used for it simply. To get a complete suite of thus proper system, column unit build up with electron beam gun head unit is necessarily required more than anything else to modify scanning electron microscope. In this study, various components included ceramic isolation plate and main body which are essentially constructed for electron beam gun head unit are designed and manufactured. And this electron beam gun head unit will be used for next connected study in the development step of scanning electron microscope based electron beam machining system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1331-1334
• /
• 2008

In this paper, we developed a novel hyperreality display called the Head Dome Projector (HDP). The HDP is a head-mounted display consisting of a dome-shaped screen with a very small radius of 40 cm, a mobile projector with ultra-wide projection lens and LED light sources. The main feature of the HDP is very wide viewing angle of 160 degrees horizontally by 120 degrees vertically comparable to the human visual field of view without head tracking and 360 degrees by 360 degrees with head tracking. According to our subjective evaluation comparing the HDP with a flat-panel display (FPD), the HDP realizes hyperreality 2.5 points higher than that realized by an FPD in the case of ${\pm}5$ level evaluation for HD motion images.

• 물과 미래
• /
• 제29권5호
• /
• pp.215-222
• /
• 1996

본 논문에서는 다공성 매질의 특수율이 비정체형인 경우 대수투수계수-수두 교차공분산에 관한 식을 유도하였으며, 이 교차공분산은 수두분포로부터 특수장의 통계학적 특성을 유추하는데(inverse problem) 매우 중요한 역할을 담당한다. 비정체형 대수투수계수는 일정한 선형경향과 정체형인 미소 변동의 합으로 구성되었으며, 2차원 포화대수층에서 정상 유동문제를 추계학적으로 해석하여 수두분포를 얻었고 이로부터 교차공분산을 유도하였다. 투수계수의 상관함수가 가우스분포를 가지고 그 경향이 수두 경사와 평행이거나 직교하는 두 가지 경우에 대하여 교차공분산을 살펴 본 결과, 투수장의 경향이 주 흐름방향과 평행한 경우 흐름방향 쪽만 제외하고는 정체형임이 밝혀졌다. 또한, 흐름방향과 직교하는 쪽으로의 교차공분산은 정체형 모델 결과와 달리 영이 아님를 알 수 있었다. 따라서 지하수 유동이나 오염물질 확산문제를 다룰 경우, 투수계수장에 어떤 경향이 존재한다고 의심될 때에는 반드시 그 경향을 해석과정에 포함시켜야 한다.

• International journal of advanced smart convergence
• /
• 제6권1호
• /
• pp.18-25
• /
• 2017

Recently, VR HMD (virtual reality head mounted display) has been utilized for virtual training, entertainment, vision therapy, and optometry. In particular, virtual reality contents are increasingly used for vision therapy and optometry. Accordingly, high-quality virtual reality contents such as a natural vision of life is required. Therefore, it is necessary to study the content production according to the optical characteristics of the VR HMD. The purpose of this paper is to suggest a proper FOV (field of view) of contents according to the distortion rate. We produced virtual reality contents and obtained distorted images by virtual camera. The distortion rate is calculated by using the distorted image. It is proved that the optimal FOV of the VR content with the minimum distortion is $90{\sim}100^{\circ}$. The results of this study are expected to be applied to the production of high quality contents.

• The Journal of the Acoustical Society of Korea
• /
• 제15권3E호
• /
• pp.37-44
• /
• 1996

A new method for efficient modeling of the Head-Related Transfer Functions(HRTF's) without loss of any directional information is proposed. In this paper, the HRTF's were empirically measured in a real room and modeled as the ARMA models with common AR coefficients and different MA coefficients. To assess the validity of the proposed ARMA model, psychophysical tests show that the proposed ARMA model, in comparison with the conventional MA model, requires a small number of parameters to represent empirical HRTF's and improves the back-to-front confusions in sound-field localization. Thus, significant simplifications in the implementations of sound-field synthesis systems could be obtained by using the proposed ARMA model.

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.479-484
• /
• 2006

This paper presents an active control of the aperture type near-field storage head. In order to achieve a fast and accurate control, a dual servo control algorithm is applied. Based on the big difference in time constants of two actuators, they are used independently. With the combination fine and coarse actuator, the disk is rotated up to 10 rpm speed until the gap is controlled within 100 nm. From the experimental results, the feasibility and the performance of active dual servo gap control is proved.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.875-878
• /
• 2005

This paper presents active control of aperture type near-field storage head. In order to achieve fast and accurate control, dual servo control algorithm is applied. Based on the big difference in time constant, we seperate two actuator and control independently. With the combination of fine and coarse actuator, gap is controlled within 100nm until the disk rotates upto 10 rpm speed. From the experimental results, the feasibility and performance of active gap control is proved.

• 소성∙가공
• /
• 제18권8호
• /
• pp.607-616
• /
• 2009

There are three sub-processes associated with the assembly of the valve seat and cylinder head; heat fitting, cold fitting, and shrink fitting. In the heat fitting stage, the cylinder head is heated to a specified temperature and then squeezed toward the outer diameter of the valve seat. The cold fitting process cools the valve seat and safely squeezes it toward the inner diameter of cylinder head. However, these methods increased the installations & running cost and curtailed productivity. To address these problems, we analyzed the shrink fitting process using the contact pressure caused by fitting interference between the outer diameter of the valve seat and the inner diameter of the cylinder head. In this study, a closed form equation for predicting the contact pressure and fitting load is proposed. For quality control of the assembly line, principal factors of the shrink fitting process influenced in contact pressure were simulated by the FEM. Actual loads measured in the field showed good agreement with the results obtained by theoretical and finite element analysis.