• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.721-727
• /
• 2009

Wireless Sensor Networks(WSN) make use of low cost and energy constrained sensor nodes. Thus, reaching the successful execution of its tasks with low energy consumption is one of the most important issues. The limitation of existing hierarchical algorithms is that many times the data are transmitted to the opposite direction to the sink. In this paper, DDACM (Data Direction Aware Clustering Method) is proposed. In this method, the nearest node to the sink is elected as cluster head, and when its energy level reaches a threshold value, the cluster head is reelected. We also make a comparison with LEACH showing how this method can reduce the energy consumption minimizing the reverse direction data transmission.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.35-40
• /
• 2012

The aims of this study are to investigate stereotypes of motion-direction and real motion-directions for seven principal controls in passenger cars, and to compare the stereotypes and real motion-directions for the controls. The stereotypes were obtained by using questionnaire survey, in which 385 subjects participated. The real motion-direction data were gathered for 64 passenger cars including RVs and SUVs. The results showed that while there are dominant motion-directions for head light, door key and door lock controls, dominant motion-directions are not found for other controls investigated in this study. The stereotypes of motion-directions for seven controls obtained in this study were much different from those of the real data. Furthermore, the stereotypes for wiper, head light and high beam controls based on the questionnaire survey were opposite to the real motion-directions.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2010

Purpose : This research intended to find out the effects of scalenus medius muscle relaxed posture on the increase of head-neck rotation for general adults. Methods : This research was conducted on 30 subjects whose both sides head neck rotation angles are not the same and that agreed to participate in the experiment. In a posture of sitting erectly on a mat, both sides head neck rotation angles were measured with C-ROM equipment, and while supporting arm in direction opposite the side where head neck rotation limited and leaning over the body at 45 degree and neck at vertical condition against ground, head-neck rotation angles were measured each with C-ROM equipment. Results : The Head-Neck rotation angle on the side of limited head-neck rotation demonstrated more increase in scalenus medius relaxed posture than in erect sitting posture, showing significant difference statistically(p<0.05). The head-neck rotation angle on the side of non-limited Head-Neck rotation demonstrated more decrease in scalenus medius relaxed posture than in erect sitting posture, not showing any significant difference statistically (p>0.05). Conclusions : This posture may be used for preventing limit of head-neck rotation caused of scalenus medius muscle tension and increasing head-neck rotation.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.14-24
• /
• 2010

Because WSNs operate with limited resources of sensor nodes, its life is extended by cluster-based routing methods. In this study, we use data on direction, distance, density and residual energy in order to maximize the energy efficiency of cluster-based routing methods. Through this study, we expect to minimize the frequency of isolated nodes when selecting a new cluster head autonomously using information on the direction of the upper cluster head, and to reduce energy consumption by switching sensor nodes, which are included in both of the new cluster and the previous cluster and thus do not need to update information, into the sleep mode and updating information only for newly included sensor nodes at the setup phase using distance data. Furthermore, we enhance overall network efficiency by implementing secure and energy-efficient communication through key management robust against internal and external attacks in cluster-based routing techniques. This study suggests the modified cluster head selection scheme which uses the conserved energy in the steady-state phase by reducing unnecessary communications of unchanged nodes between selected cluster head and previous cluster head in the setup phase, and thus prolongs the network lifetime and provides secure and equal opportunity for being cluster head.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.349-353
• /
• 2016

The purpose of this study was to investigate possible age differences in the attenuation of acceleration in the upper body (from pelvis through shoulder to head) during fast walking. Thirty young and 29 elderly subjects participated in this study. Wireless acceleration sensors were attached on head, shoulder, and pelvis. Subjects performed two trials of fast walking on a treadmill, where the fast speed was defined as 1.5 times of the comfortable speed. Root-mean-squared (RMS) accelerations of each axis were compared with age group and sensor position as independent factors. In the AP direction, the pelvis acceleration was greater in the young and the shoulder-to-head attenuation was also greater in the young (p<0.001), so that the head acceleration was comparable between age groups (p=0.581). In the ML direction, the pelvis acceleration was greater in the young and also the pelvis-to-shoulder attenuation was greater in the young (p<0.001), so that the head acceleration was greater in the elderly group (p<0.001). Insufficient attenuation ML acceleration in the elderly resulting in the greater acceleration in the head may deteriorate the balance control which utilize feedback signals from the sensory organs in head, e.g., vestibular and visual systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.988-991
• /
• 2006

Rolling Stock running are making Rail Head Surface damage(corrugation, flaking, shelling, etc). It's coming out Rail Head Surface Irregularity. It increases Rolling Stock and structure vibration. Therefore, this paper analyzes the influence of Rail Head Surface Irregularity to railway vibration. And, It introduces the management method of Rail Head Surface and proposes its R&D direction in railway-run organization.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.1128-1141
• /
• 2022

Due to increased interest in safety in sports, leisure, industries, and daily life; the demand for products that protect the head is increasing. As a preparatory study for the development of head protection for head injury prevention, this study analyzed patents and utility models related to head protection products such as industrial safety helmets, vehicle helmets, and sports protection gear. For this study, 368 patents and utility models for head protection products searched through WipsOn were selected and analyzed by application year, function, application, protection area, main material, and subject. From the analytic results of this study, the quantitative and qualitative flow and characteristics of developing technology related to head protection products were identified. Through the trend of current technology, it provided data to seek the development direction in the future. The significance of this study is to secure objective data to establish a road map for creating new Intellectual Property for head protection products.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.24-30
• /
• 1998

Strength and displacement of jig body in index machine utilized for multiprocess machining such as drilling, boring and tapping, etc, at the same time were analyzed by the use of finite element analysis soft ware ANSYS 5.2A. The whole geometry was constructed by 4048 elements and 7016 nodes employing 8 node brick element. The analyses were carried out on five loading cases combining vertical and horizontal machining to simulate the case occurring large displacement and the one occurring small displacement one and provided following conclusions. (1) Jig body had sufficient strength because its safety factor was 6.95 even in the most severe loading case. (2) The largest displacement in Z direction was 549 m and that in radial direction was 43.7 m. (3) In order to reduce the displacement, vertical machining rather than horizontal or two or three processes should be adopted in the same station. (4) Alternate change of horizontal machining direction at consecutive stations can reduce the displace ment. (5) The dimension of the slider should be increased to reduce the displacement by the tolerance in the sliding part. (6) A bypass idle piston head needs to be installed to give a counterpart supporting load from opposite direction for a single horizontal machining case.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.96-102
• /
• 2009

Forest fire ignition and spread characteristics are needed as basic data in fire management. Slope aspect of ignition point, spread direction, and wind direction at that time were analyzed and regression equations were proposed for predicting burned area, fire perimeter, head spread rate, and flank spread rate using combustion time using 101 forest fires broken out between 2007 and 2009 spring. 57% forest fires of investigated numbers were ignited in south, southwest, and southeast aspects and 68% of forest fires were spreaded to east, southeast, and northeast influenced by westerly wind. About 11.8ha forest was burned and 0.5km fire perimeter increase was predicted per hour. Head and flank spread rate were calculated 0.13km and 0.05km, respectively.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.1
• /
• pp.43-50
• /
• 2021

This study aims to investigate and analyze the utilization perception of members of head families based on a survey on the history, folklore, architectural resources of head families. In order to identify the direction of utilization of Jeonnam head family resources, tangible and intangible resources, and spaces and places to contain programs were researched. The results of the study were summarized as follows. 1) Head family houses in Jeonnam could be categorized into head families that preserved the original form of head family houses, head families that preserved a part of head family houses, head families that newly built head family houses while the original forms thereof have disappeared, and relocated head families of which eldest grandsons no longer reside, where only the sites of the head family houses remain or relocated to a different place. 2) In the case of perception of members of head families on the utilization of head family resources, 27 head families consented to the utilization, 35 head families opposed to the utilization, and 6 head families were undecided on the utilization out of a total of 68 head families. 3) The results of investigating and analyzing the desired type of programs of each head family by categorizing the programs into lodging, food, meditation, education, and tourism, as many as four programs were desired, while some families desired 2 or 3 programs at the lowest, showing an overlapping characteristic.