• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.28 no.3
• /
• pp.41-49
• /
• 2022

Background: In patients with forward head posture (FHP), the head is positioned forward, causing increased tension in the muscles and structures of the head, neck, and shoulders. This can result in joint dysfunction that may lead to abnormal afferent information. The purpose of this study was to investigate the effect on foot pressure through the isometric hip abduction (IHA) bridge exercise using elastic bands in patients with FHP. Methods: Twenty patients with FHP were randomly assigned to a study group that applied joint mobilization, soft tissue mobilization, a deep neck flexor strengthening exercise, and the IHA bridge exercise using an elastic band. A control group was also constituted, and members were given joint mobilization, soft tissue mobilization therapies, and the deep neck flexor strengthening exercise. Ten patients were assigned to each group. The static foot pressure and dynamic foot pressure of each patient were measured before and after the intervention, and the interventions for each group were applied twice a week for 4 weeks. Results: Both the study group and the control group showed significant differences in static and dynamic foot pressure before and after the interventions (p<.05). There were no significant differences in foot pressure between the study and control groups. Conclusion: : The results of this study revealed that there were no significant differences between the group doing the IHA bridge exercise using the elastic band and the control group. However, the intervention methods applied to both the groups were effective in improving the body center control of FHP patients.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.3
• /
• pp.217-223
• /
• 2020

Objective: The purpose of this study was to analyze the effect of postural sway on the kinematic variables of the putter head during golf putting and to provide information to the importance of postural sway control in the putting stroke for novice golfers. Method: The center of pressure (CoP) and Kinematics variables of the putter head were calculated during 2 m flat golf putting using 8 motion capture cameras (250 Hz) and 2 force plate (1,000 Hz). SPSS 24.0 was used to perform Pearson's correlation coefficient and simple regression analysis, and the statistically significance level was set to .05. Results: As a result of analyzing the correlation between CoP variables and the putter head rotation angle, the CoP moving length, CoP moving range (ML direction), and CoP moving velocity (ML direction) showed a positive correlation with the putter head rotation angle (yaw axis) and were statistically significant. Conclusion: Therefore, In order to perform the accurate putting stroke maintaining the ball's directionality, it is determined that it is important to control posture sway in the ML directions by minimizing the movement and velocity of the CoP.

• The Korean Journal of Physiology
• /
• v.22 no.1
• /
• pp.79-88
• /
• 1988

The effect of cervical proprioceptors on the control of eye movement and body posture was examined in unanesthetized labyrinthine intact and bilateral labyrinthectomized cats. Cervico-ocular reflex(COR) was elicited by stimulation of the cervical proprioceptors by means of sinusoidal rotation of head or body in the darkness. The following results were obtained: 1) In labyrinthine intact cats, sinusoidal rotation of the whole body elicited compensatory eye movement(vestibulo-ocular reflex: VOR); the direction of eye movement was opposite to the direction of head rotation. 2) Anticompensatory eye movement was observed by sinusoidal rotation of the body with head fixed in labyrinthine intact cats; the direction of eye movement was the same as the direction of head rotation. 3) Compensatory eye movement was observed by sinusoidal rotation of the head with body fixed or sinusoidal rotation of the body with head fixed in both acute and chronic bilateral labyrinthectomized cats. These results suggest that the cervical proprioceptors are important in the control of ocular movement and posture in the bilateral labyrintectomized cats, although they are questionable in labyrinthine intact cats.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.3
• /
• pp.337-342
• /
• 2021

Objective: Forward head posture can caused by deformation of structures and soft tissues around the neck, which has an uncomfortable effect on daily life as well as functional disorders of the neck. However, studies related to direct forward head posture, neck function, and quality of life have not yet been conducted. Therefore, the purpose of this study is to investigate the effect of improving the forward head posture on the function of the neck and to examine the change in the quality of life. Design: A randomized controlled trial Methods: The participants were 41 adults (22.17±2.67 years) recruited and redivided randomly into two group (Biofeedback, BFG vs. Control). The Biofeedback group was proceeded according to the over load principle through 4 steps. (n=21). The control (n=20) was not applied after TENS padding was applied and 20 minute. This study was conducted three times a week for a total of four weeks. Results: Forward head posture for showed significant improvement in the results in the craneocervical angle (p<0.05, 95% CI: 0.130, 2.858). In neck disability index more significant improvement in BFG than group (p<0.05, 95% CI: 14.346, 17.825), and BFG showed significant increased in the results in the Quality of life (p<0.05, 95% CI: 0.392, 9.549) Conclusions: This study suggected that forward head posture treatment and effective for neck function and quality of life

• Journal of Biosystems Engineering
• /
• v.15 no.2
• /
• pp.110-122
• /
• 1990

This study was undertaken to develop the feed rate control system for the head feed thresher by making use of the microprocessor and to evaluate the response of the system to a various threshing conditions. The control unit was composed of one-board microcomputer. The speed of the wet-paddy feeding chain was controlled by dc moter with PI controller. It was used the adaptive control method to maintain the constant feed rate regardless of the fed rice varieties. The sliding type potentiometer was used as the feed rate sensor, which was attached on the sheaf-holding apparatus. The mathematical models of the system components were derived and computer simulation was developed for investigating the parameters affecting on control performance and for estimating the response of the system. A one-board microcomputer-based feed rate control system developed in this study was properly functioned and assessed as adequate for the feed rate control system of the head feed thresher. Based on the simulation for the bundle feed, it was anticipated that the lower setting value of the cylinder speed(RL) is to be set higher than the limiting operational speed. In addition, the higher setting value of the cylinder speed(RH) is to be set lower than the limiting cylinder speed for threshing. The computer simulation for the continuous spread feed showed that the lower the setting value of straw layer thickness(LL) was set, the shorter the correction time. However, if too low LL may be established, the feed rate could not reach to its desired rate.

• Korean Journal of Head & Neck Oncology
• /
• v.15 no.2
• /
• pp.162-165
• /
• 1999

Background and Objectives: Multiple primary tumors of the upper aerodigestive tract are not unusual. We examined head and neck cancer patients to discover the presence of second primary cancer in their upper gastrointestinal tract, using esophagogastroscopy. Materials and Methods: Endoscopic examination of the upper gastrointestinal tract was performed on 51 patients whose head and neck cancers were treated at department of therapeutic radiology from August 1996 to April 1999. Two of all patients had been studied by barium swallowing study. In 51 patients, twenty-four had a primary tumor in the larynx, 8 in the oropharynx, 6 in the nasopharynx, 6 in the oral cavity, 6 in the hypopharynx, and 1 in the nasal cavity. Endoscopically pathologic lesions were biopsied. In control group, endoscopy was performed on 1097 patients who didn't complain any symptoms. Results: Endoscopy showed early malignant lesions in 4 cases(7.7%). Histology of esophageal cancers showed squamous cell carcinoma. Malignant lesions of stomach in 2 cases were histologically identified as adenocarcinoma. Two esophageal cancers occurred in patients whose primary lesions had oropharynx and hypopharynx. Two cases of gastric cancer were also accompanied by oropharynx and hypopharynx. The incidence of second primary cancer was 2 in oropharynx and 2 in hypopharynx. In all cases, second primary cancers were found simultaneously. In control group, 9(0.8%) of 1097 patients were confirmed as early esophageal and gastric cancers. Conclusion: The majority of esophageal and gastric cancer detected by endoscopy were early stage in both head and neck cancer and control group. The incidence of esophageal and gastric cancer of head and neck cancer patients was 10 times as high as that of control group. Although followup period was short, all second primary cancers were detected simultaneously. We would recommend that endoscopic evaluation be included in the workup and followup of all patients with newly diagnosed head and neck cancer.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1493-1495
• /
• 1997

Cropping of head and tail ends of rod in wire Rolling Process is required to aviod roll damage, and prevent cobbles. In order to reduce the crop loss, the new crop control system for rotary shear of Wire rolling Process has been developed. Performance shows the developed system cut precisely within setting length. As a result, it is expected to increase the yield ratio of products about 0.2 percent and stabilize the operantional condition.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.3
• /
• pp.89-94
• /
• 2015

Purpose : This study was analyzed to researched the improvement of the posture and breathing ability on correction method of posture and breathing exercise in Forward Head Posture(FHP) Method : Eighten forward head posture subjects participated in this study. The control group applied to correction method of posture and the experiment group applied to correction method of posture with breathing exercises. Results : The results showed significant improvement in Craniovertebra-Angle on each two group(P<0.05). All the other result showed non-significant in respiratory(Tidal volume, Expiratory residual volume, Inspiratory residual volume) But value of result is slightly improved in after exercise. Conclusion : CVA angle is increased in each group but not increased between experiment group and control group. Total Volume(TV), Inspiratory Reserve Volume(IRV) and Expiratory Reserve Volume(ERV) are a little increased.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.195-198
• /
• 1995

In this paper We propose one computer interface device for handicapped people. Input signals of the interface device are movements of eyeballs and head of handicapped. The movements of the eyeballs and head are detected by an image processing system. One feature of our system is that the operator is not obliged to wear any burdensome device like glasses and a helmet. The sensing performance of the image processing of the eyeballs and head is evaluated through experiments. Experimental results reveal the applicability of our system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.121-128
• /
• 2000

Simple design methods were developed to control the coolant flow rates through cylinder head gasket holes. Applying the concept of flow through an obstruction the ratio of intake to exhaust side flow rates could be easily controlled while maintaining the flow rates per cylinder of the original model. Flow distribution in the coolant passage of the original model was calculated by CFD and the flow rates at the gasket holes were modified based on the calculation results. The calculated flow rated of the modified gasket holes were reasonably close to target values. For more accurate control of the flow rate distribution, a design method with iterative CFD calculations was also suggested. The final size of gasket holes for the target flow rates were obtained just after a few optimization iterations. These methods can be very useful for the optimization of heat transfer characteristics in engine cylinder head and block.