• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.425-432
• /
• 2019

This study examined the effects of livestock disease news, such as foot-and-mouth disease (FMD), collected by the Korea Press Foundation on BIGKinds on the consumption of beef and pork. The consumer purchase data were obtained from the Rural Development Administration's Agrifood consumer panel data. Survival analysis showed that the FMD news noted beef and pork, and the first purchase rate decreased due to FMD news. The time-dependent Cox proportional hazards model revealed all models to be significant. FMD news was significant in each model. In 2010, the Hazard Ratio of domestic and imported pork was 0.999, and the first purchase rate decreased 0.999 times for each additional FMD news item. On the other hand, the Hazard Ratio of pork in 2015 was 1.001, and the first purchase rate increased. In the case of beef, results similar to pork were shown. This study estimated the impact of consumer meat consumption disease news on the first purchases according to origin and meat. These results provide the necessary information for rational production and consumption activities. In addition, it can also be used for promotion by estimating the duration of livestock disease news.

• Land and Housing Review
• /
• v.12 no.3
• /
• pp.109-119
• /
• 2021

Global warming caused by greenhouse gas emissions has rapidly increased abnormal climate events and geotechnical engineering hazards in terms of their size and frequency accordingly. Biopolymer-based soil treatment (BPST) in geotechnical engineering has been implemented in recent years as an alternative to reducing carbon footprint. Furthermore, thermo-gelating biopolymers, including agar gum, gellan gum, and xanthan gum, are known to strengthen soils noticeably. However, an explicitly detailed evaluation of the correlation between the factors, that have a significant influence on the strengthening behavior of BPST, has not been explored yet. In this study, machine learning regression analysis was performed using the UCS (unconfined compressive strength) data for BPST tested in the laboratory to evaluate the factors influencing the strengthening behavior of gellan gum-treated soil mixtures. General linear regression, Ridge, and Lasso were used as linear regression methods; the key factors influencing the behavior of BPST were determined by RMSE (root mean squared error) and regression coefficient values. The results of the analysis showed that the concentration of biopolymer and the content of clay have the most significant influence on the strength of BPST.

• Korea Science and Art Forum
• /
• v.37 no.5
• /
• pp.239-248
• /
• 2019

This study started from the need to improve one of shortcomings of synthetic PVAc adhesives - potential physical harm and environmental hazards to the workers or their users. As a matter of fact, PVAc adhesives are currently mainly used because of their convenience and economy for the production of woodcrafts. The purpose of this study was to develop natural adhesives through research on natural adhesives in step with the current increase of societal attention to environmental friendliness and rapid surge in their demand in the face of such problems. So, the study attempted research on the bases to develop natural adhesives for woodcraft, using cellulose extracts from wood - natural adhesive material. The findings of the study were as follows. Firstly, natural adhesives showed the improved effect in the field of adhesive strength, a basic physical property by 0.2 - 4 times compared with the existing materials and the study confirmed they had the similar or stable pH value. Besides, they had good reversibility, demonstrating their basic physical property as a natural adhesive for woodcraft. While, their durability to ultraviolet ray degradation also showed an excellent result value being better by 1.5 - 8.5 times than the existing materials. The study expects natural adhesives with improved and better performances compared with the existing materials could be developed, if further research on adhesive strength, antibiosis, conservative property were to continue by developing refinery technology for cellulose extracts from wood and rendering the functionality to them.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.530-535
• /
• 2021

Background: Despite the lack of official COVID-19 statistics, various workplaces and occupations have been at the center of COVID-19 outbreaks. We aimed to compare legal measures and governance established for managing COVID-19 infection risks at workplaces in nine Asia and Pacific countries and to recommend key administrative measures. Methods: We collected information on legal measures and governance from both general citizens and workers regarding infection risks such as COVID-19 from industrial hygiene professionals in nine countries (Indonesia, India, Japan, Malaysia, New Zealand, Republic of the Philippines, Republic of Korea, Taiwan, and Thailand) using a structured questionnaire. Results: A governmental body overseeing public health and welfare was in charge of containing the spread and occurrence of infectious diseases under an infectious disease control and prevention act or another special act, although the name of the pertinent organizations and legislation vary among countries. Unlike in the case of other traditional hazards, there have been no specific articles or clauses describing the means of mitigating virus risk in the workplace that are legally required of employers, making it difficult to define the responsibilities of the employer. Each country maintains own legal systems regarding access to the duration, administration, and financing of paid sick leave. Many workers may not have access to paid sick leave even if it is legally guaranteed.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.194-203
• /
• 2021

With the recent increase in maintenance works on water and sewer pipes as well as district heating supply pipes, pavement cutting work using pavement cutter is on the rise. The pavement cutting operation generates considerable dust (cutting sludge) as well as noise; therefore, it is necessary to apply eco-friendly technologies that have low noise and dust recovery capability. Thus far, various equipment for recovering dust have been developed; however, there is a limitation in that the environmental friendliness is not quantified. Therefore, in this study, we developed a low-noise, dust-recovery type pavement cutter that can fundamentally remove the causes of environmental hazards such as noise and dust and evaluated the eco-friendliness of the pavement cutting process performed by this cutter. To this end, an integrated water cooling-sludge recovery system composed of a vacuum device and a sludge suction unit was developed, and the developed system was applied to a pavement cutter. Subsequently, the developed equipment was applied to the test bed, and data related to its eco-friendliness were collected and evaluated. The results showed that the cutting sludge recovery rate of the developed equipment was greater than 83%, the noise level was approximately 82 - 83 dB, and the sound power level was 115 dB. The results of this study will be used as basic data to develop improved pavement cutters in the future with improved cutting sludge recovery performance and lower noise.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.30-42
• /
• 2021

The amount of compensation and the number of cases owing to car damage from pot holes on highways across the country increased by about 4.2 times and 3.5 times, respectively, in 2019 compared to 2015. Due to the increase in damage caused by these road hazards, the Ministry of Land, Infrastructure and Transport is developing technologies and services that can collect road hazard information by using devices on commercial vehicles (DTGs, black boxes, ADASs). In preparation for the development of these technologies, this study conducted an integrated assessment of algorithms developed for interrupted-flow and uninterrupted-flow traffic under three scenarios in order to provide road hazard information to drivers and road managers. As a result, the overall accuracy of the integrated assessment was derived at 81.88%. Errors generated in this integrated assessment reflect only missing data in less than 1 minute, GPS coordinate location and algorithm related errors, taking into account the purpose and assumptions of the assessment. Among them, we derive an accuracy of 90.15%overall by calibrating GPS error data. The results of this study can be used as basic data for improving the accuracy of location-based information collected by commercial vehicles and for policy development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.587-593
• /
• 2021

Since 2017, a total of 29 fire accidents have occurred in energy storage systems (ESSs) as of June 2020. The common mode voltage (CMV) is one of the electrical hazards that is assumed to be a cause of those fire accidents. Several cases of CMV that violate the allowable insulation level of a battery section are being reported in actual ESS operation sites with △-Y winding connections. Thus, this paper evaluates the characteristics of CMV. An ESS site was modeled with an AC grid, PCS, and battery sections using PSCAD/EMTDC software. As a result of a simulation based on the proposed model, it was confirmed that characteristics of CMV vary significantly and are similar to actual measurements, depending on the grounding method of the internal transformer for PCS. The insulation level of the battery section may be severely degraded as the value of CMV exceeds the rated voltage in case of a grounding connection. It was found that the value of CMV dramatically declines when the internal transformer for PCS is operated as non-grounding connection, so it meets the standard insulation level.

• Journal of vocational education research
• /
• v.37 no.1
• /
• pp.119-138
• /
• 2018

The purpose of this study was to analyze the factors influencing of separation and the time of separation for middle and old aged self-employed workers. The cox proportional hazards model was used in the first survey of KLoSA, 684 persons who were over 40 years old in 2006, using data up to the 5th period of 2014. The main findings of this study are as follows. First, the average duration of job for middle and old aged self-employed workers in 2005 was 15.5years. Of the total 684 workers, 214(31.3%) person was found to have lost their job during survey period. Second, gender, age at start up, and education level have significant effects on job separation of them. When women, when they were older at start up, when they were graduate the university or higher, increased their risk of leaving their businesses. Third, in the characteristic of their work, the type of job and job satisfaction were found to affect to job desertion. When people are engaged in accommodation and food business rather than agriculture and forestry fishery, when the satisfaction of the work is lower, the risk was high. Based on these conlusions, the following implications are suggested. First, it is necessary to establish a support strategy for female middle-aged and old self-employed and older workers who start their own business after their 60s. Second, it is necessary to support them to enter into various fields by utilizing their own aptitude and experience rather than establishing them in industries with low entry barriers. Third, it is necessary to develop policies to help improve job satisfaction in the working environment. In particular, it is necessary to ensure that high educated self-employed workers are satisfied with various compensations by self-employed.

• Korean Journal of Microbiology
• /
• v.55 no.1
• /
• pp.33-38
• /
• 2019

Ochratoxin A (OTA), one of mycotoxins produced mainly by Aspergillus is a common contaminant of stored grains, posing health hazards to human and livestock. The aim of this study is to explore ability of isolated bacteria Bacillus subtilis AF13 and Streptomyces shenzhenensis YR226 to remove OTA. AF13 and YR226 could remove 94.23 and 97.73% of OTA ($100{\mu}g/L$), respectively during 24 h incubation in NB medium. When cultures of two strains were separated into washed cells and cell-free supernatant, the supernatant of both strains removed more than 90% of $100{\mu}g/L$ OTA, and 98.88% of OTA could be also removed by the washed cells of YR226. OTA removal occurred in a few second by the supernatant of both strains, and treatments of autoclaving, proteinase K and chymotrypsin did not affect the OTA removal by the culture supernatants, which indicate that some thermostable and non-proteinaceous substances secreted by these bacteria may be involved in OTA removal in these two bacteria. These results suggest that AF13 and YR226 can be used to remove OTA from OTA-contaminated grains and feeds, and therefore decrease economic damage in agriculture and feed industry.

• Clean Technology
• /
• v.25 no.2
• /
• pp.140-146
• /
• 2019

Flammable substances, such as organic solvents, are commonly used in laboratories and industrial processes. The flash point of flammable liquid mixtures is a very important parameter for characterizing the ignition and explosion hazards, and the flash points of mixtures of $C_2{\sim}C_3$ alcohols and 2,2,4-trimethylpentane were measured in the present study. The 2,2,4-trimethylpentane is an important component of gasoline and is frequently used in the petroleum industry as a solvent. Lower flash point data were measured for the binary systems {ethanol + 2,2,4-trimethylpentane}, {1-propanol + 2,2,4-trimethylpentane}, and {2-propanol + 2,2,4-trimethylpentane}. The flash point measurements were carried out according to the standard test method (ASTM D3278) using a Stanhope-Seta closed cup flash point tester. The measured flash points were compared with the predicted values calculated using Raoult's law and also following $G^E$ models: Wilson, Non-Random Two Liquid (NRTL) and UNIversal QUAsiChemical (UNIQUAC). These models were able to predict the experimental flash points for different compositions of {$C_2{\sim}C_3$ alcohols + 2,2,4-trimethylpentane} mixtures with minimal deviations. The average absolute deviation between the predicted and measured lower flash point was less than 1.28 K. A minimum flash point behaviour was observed in all of the systems as in the many observed cases for the hydrocarbon and alcohol mixtures.