• Journal of Life Science
• /
• v.34 no.3
• /
• pp.191-198
• /
• 2024

To verify the nutritional value and safety of larvae fed with a soymilk residue-added food source, we compared and analyzed the nutritional components of and harmful substances in Tenebrio molitor larvae reared on wheat bran. Crude protein content based on dry weight was 1.2 times higher in the 10% soymilk residue-fed group (SR) (54.0%) than in the wheat bran-fed group (WB) (43.5%). Dietary fiber also tended to be 1.9 times more in the SR (4.9%) than the WB (2.5%). Among unsaturated fatty acids, the linoleic acid content was found to be 1.1-fold higher in the SR (32.9%) than in the WB (29.0%). Potassium, which was the most abundant among the macro minerals, was 1.1-fold more abundant in the WB (1,074.5 mg/100 g) than in the SR (1,014.0 mg/100 g). Among the micro minerals, zinc content was 1.2-fold higher in the SR (14.5 mg/100 g) than in the WB (11.9 mg/100 g). The results of the analysis of hazardous substances in the WB and SR revealed that the amount of heavy metals met the standards for heavy metals in edible insects, and food poisoning-inducing bacteria such as Escherichia coli and Salmonella spp. were not detected in all groups. These results indicate that mealworm larvae fed with 10% soymilk residue have abundant nutrients and are safe for intake. Thus, food sources with added soymilk residue has the potential to be used as feed ingredients.

• Korean Journal of Community Nutrition
• /
• v.16 no.4
• /
• pp.466-472
• /
• 2011

Hazardous chemicals, such as polycyclic aromatic hydrocarbons (PAHs), volatile organic compounds (VOCs) and heavy metals, are known as being harmful to human health were included in oils released by the Herbei Spirit Oil Spill accident in December 2007. To investigate changes of eating habits by the exposure to harmful substances, we conducted 5 focus group interviews for residents at Taean coast areas, who had experienced the oil spill accident. Participants included 46 women (mean age: $57.2{\pm}10.9$) who were mainly responsible for preparing family meals. Focus group discussions were audio-taped, transcribed and categorized by themes. Participants expressed more frequent illness symptoms such as dizziness, vomiting, visual loss, and skin diseases after the accident. They mentioned that their worries about economic hardship and worsened health status since the accident induced mental problems, such as depression about their children. Regarding eating habits, participants reported less intakes of fishes and meats and relatively more intakes of vegetables and kimchi due to the lack of household incomes after the accident. Although the participants had been used to collecting or catching fish or shellfish for their consumption previously, they mainly purchased these foods from local markets after the accident. Changes of eating habits induced by the accident included drinking boiled water and having steamed or fried seafood rather than raw seafood. Changes of food intakes occurred less frequently in older adults due to their longterm fixed eating habits, although they felt uncomfortable for having raw fish. The findings of this study clearly present that the exposure of hazardous substances by the oil spill accident had a significant impact on changes in eating habits besides economic, physical, and mental problems among the residents in Taean. Continuous health and nutrition monitoring and support are needed.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.2
• /
• pp.101-110
• /
• 2011

Charcoal burning in the process of manufacture and ordinary use often release many constituent chemical species. As a result of open burning, the chemical composition as well as the physical properties of original material changes through the modification of surface properties of charcoal. Surface modification could be more responsible toward the outside elements for surface adsorption, it becomes easy to adsorb more toxic elements through surface adsorption. In this study, four kinds of commercially available charcoal were studied against the chemical and thermal stability along with the heavy metals and organic hazardous substances. Thermo gravimetric analysis (TGA) and differential scanning calorimetry, from room temperature to $400^{\circ}C$, were performed to study the weight loss and the changes in the behavior of those substances. According to TGA analysis, about 10% of weight loss was happened before $200^{\circ}C$. It was found that related weight loss of this temperature region may responsible to the gas phase organic matter. Natural charcoal, K1 and C1 show 15% of loss during the reaction heated to $400^{\circ}C$, while the artificial charcoal K2, C2 show the weight loss of about 20% was found. This is consistent with the main organic matter and VOC analysis results shown. Chemical composition based on the x-ray diffraction analysis was carried out. X-ray diffraction analysis reveals the existence of chemical additive in the forms of $Ba(NO_3)_2$, $BaCO_3$, and $NaNO_3$.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.261-268
• /
• 2014

In advanced countries, a variety of consumer exposure assessment models including CONSEXPO, are developed to manage risks of consumer products containing hazardous materials. The models are used to assess the risks of exposure to hazardous chemicals in consumer products, which serves as a foundation for regulation standards. In this study, exposure assessment models applicable for various scenarios were reviewed and a proper model was applied for the selected products and risk assessment was conducted at each stage to establish a risk assessment procedure for different types of products. Based on the exposure scenario, exposure factor was selected and according to the algorithm produced based on CONSEXPO exposure model, some level of phthalates were detected from some types of PVC flooring. However, a correlation between phthalate content and migration rate showed r-square 0.0065, little correlation, which is inadequate for estimating standard value. For this reason, it seems valid that the current standard be in place. Additionally, any new standard was not suggested as VOCs were not found harmful to human health, allowing the existing standard to be continuously applied. No migration rate was found for heavy metals and risk assessment was not performed accordingly. In this aspect, it is presumed that hazards to health through dermal exposure would be very little.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.5-13
• /
• 2008

In this study, It was carried out to evaluate the feasibility of recycled crushed concrete as aggregate used cement mortar replace sand and to investigate engineering properties of recycled aggregate for hazardous waste solidification. The compressive strength of cement mortar replaced 5-15% (wt.) recycled aggregate was over $163kgf/cm^2$ which is the standard of first grade concrete block class C. And cement mortar was examined to evaluate the stability by leaching test. Cu, Cd, Pb, Cr, and As as the heavy metals were proved very stable but mercury (Hg) was leached high concentration because it was simply tied to the cement surface. We investigated the crystal structures of cement mortar and they had shown the peaks of $Ca(OH)_2$, ettringite, and CSH (calcium silicate hydrate). As the result, the longer curing time, the higher CSH peak that means to increase compressive strength and the cement mortar was more stable. Therefore it was shown that it may be possible to apply hazardous waste solidification using recycled aggregate, fly ash and sewage sludge ash.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.2 s.57
• /
• pp.392-401
• /
• 1997

Generally working environment and worker's health status of small scale industries (SSI) which employ less than 50 workers are known to be poorer than those of large scale industries(LSI) which employ more than 500 workers. However, according to the analysis of occupational injuries in Korea, prevalence rate of occupational injuries of SSI was 3.1 times as high as LSI. But there was no difference in prevalence rate of occupational disease and werkers with suspected occupational disease(D1) between SSI and LSI. To confirm these two different facts, we surveyed working environment and worker's health status of SSI and LSI in Kyeungin industrial complex. Workers in SSI were 10,878 and workers in LSI were 8,291 and number of hazardous agents in SSI were 3,554 and those of LSI were 1,916. We found following results. First, proportion of male workers and workers who were less than 30 yens old and more than 50 yens old was higher in SSI compared to LSI. Second, worker in SSI had more liver disease, viral hepatitis, and pneumoconiosis than in LSI, and there were more worker with suspected occupational disease, general disease, and worker needed close observation in SSI. But these effects had not statistical significance under the condition controlled by age and sex with logistic regression. Third, the numbers measured for specific chemicals, organic solvents, and heavy metals in SSI was more than in LSI. However there was on difference in the excess rate of each hazardous agent between SSI and LSI. As the above results workers' health status in SSI was poorer than in LSI, but these results were mainly due to the population structure difference. Although there were some limitation of this study and problems of sensitivity and validity for periodic health examination and working environment evaluation method, the concept that working environment and worker's health status in SSI should be reviewed. In future the study that will reveal the real weak point of SSI should be performed.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2010

It is of importance that all countries in worldwide, including EU and China, have adopted the Restrictions on the use of certain Hazardous Substances (RoHS) for all electronics. IEC62321 document, which was published by the International Electronics Committee (IEC) can have conflicts with the standards in the market. On the contrary Publicly Accessible Specification (PAS) for sampling published by IEC TC111 can be adopted for complementary application. In this work, we tried to find a route to disassemble and disjoint cellular phone sample, based on PAS and compare the screening methods available in the market. For this work, the cellular phone produced in 2001, before the regulation was born, was chosen for better detection. Although X-ray Fluorescence (XRF) showed excellent performance for screening, fast and easy handling, it can give information on the surface, not the bulk, and have some limitations due to significant matrix interference and lack of variety of standards for quantification. It means that screening with XRF sometimes requires supplementary tool. There are several techniques available in the market of analytical instruments. Laser ablation (LA) ICP-MS, energy dispersive (ED) XRF and scanning electron microscope (SEM)-energy dispersive X-ray (EDX) were demonstrated for screening a cellular phone. For quantitative determination, graphite furnace atomic absorption spectrometry (GF-AAS) was employed. Experimental results for Pb in a battery showed large difference in analytical results in between XRF and GF-AAS, i.e., 0.92% and 5.67%, respectively. In addition, the standard deviation of XRF was extremely large in the range of 23-168%, compared with that in the range of 1.9-92.3% for LA-ICP-MS. In conclusion, GF-AAS was required for quantitative analysis although EDX was used for screening. In this work, it was proved that LA-ICP-MS can be used as a screening method for fast analysis to determine hazardous elements in electrical products.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.402-413
• /
• 2001

Food safety is a term broadly applied to food quality that may adversely affect human health. These include zoonotic diseases and acute and chronic effects of ingesting natural and human-made xenobiotics. There are two major areas of concern over the presence of residues of antibiotics in animal-derived foodstuffs with regard to human health. The first is allergic reactions. Some antibiotics, such as penicillins can evoke allergic reactions even though small amounts of them are ingested or exposed by parenteral routes. The second is development of antibiotic resistance in gut bacteria of human. Recently multi-resistant pneumococcal, glycopeptide-resistant enterococci and gram negative bacteria with extended-spectrum $\beta$-lactamases have spread all over the world, and are now a serious therapeutic problem in human. Although it is evident that drugs are required in the efficient production of meat, milk and eggs, their indiscriminate use should never be substituted for hygienic management of farm. Drug should be used only when they are required. In addition to veterinary drugs, environmental contaminants that were contaminated in feed, water and air can make residues in animal products. Mycotoxins, heavy metals, pesticides, herbicides and other chemicals derived from industries can be harmful both to animal and human health. Most of organic contaminants, such as dioxin, PCBs and DDT, and metals are persistent in environment and biological organisms and can be accumulated in fat and hard tissues. Some of them are suspected to have endocrine disrupting, carcinogenic, teratogenic, immunodepressive and nervous effects. The governmental agencies concerned make efforts to prevent residue problems; approval of drugs including withdrawal times of each preparation of drugs, establishment of tolerances, guidelines regarding drug use and sanitation enforcement of livestock products. National residue program is conducted to audit the status of the chemical residues in foods. Recently HACCP has been introduced to promote food safety from farm to table by reducing hazardous biological, chemical and physical factors. Animal Production Food Safety Program, Quality Assurance Programs, Food Animal Residue Avoidance Databank are para- or non-governmental activities ensuring food safety. This topic will cover classification and usage or sources of chemical residues, their adverse effects, and chemical residue status of some countries. Issues are expanded to residue detection methodologies, toxicological and pharmacokinetic backgrounds of MRL and withdrawal time establishments, and the importance of non-governmental activities with regard to reducing chemical residues in food.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.670-682
• /
• 2018

Engineered nanomaterials (ENMs) can be released to humans and the environment through the generation of waste containing engineered nanomaterials (WCNMs) and the use and disposal of nano-products. Nanoparticles can also be introduced intentionally or unintentionally into waste streams. This study examined WCNMs in domestic industries, and target nanomaterials, such as silicon dioxide, titanium oxide, zinc oxide, nano silver, and carbon nanotubes (CNTs), were selected. We tested 48 samples, such as dust, sludge, ash, and by-products from manufacturing facilities and waste treatment facilities. We analyzed leaching and content concentrations for heavy metals and hazardous constituents of the waste. Chemical compositions were also measured by XRD and XRF, and the unique properties of nano-waste were identified by using a particle size distribution analyzer and TEM. The dust and sludge generated from manufacturing facilities and the use of nanomaterials showed higher concentrations of metals such as lead, arsenic, chromium, barium, and zinc. Oiled cloths from facilities using nano silver revealed high concentrations of copper, and the leaching concentrations of copper and lead in fly ash were higher than those in bottom ash. In XRF measurements at the facilities, we detected compounds such as silicon dioxide, sulfur trioxide, calcium oxide, titanium dioxide, and zinc oxide. We found several chemicals such as calcium oxide and silicon dioxide in the bottom ash of waste incinerators.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.3
• /
• pp.168-176
• /
• 2012

A total of 48 dust samples were collected from large shopping mall parking lots in Daegu metropolitan city in March 2011. Samples were sieved through a 100 ${\mu}m$ mesh and the concentration of 14 elements have been determined using by ICP after acid extraction. Results showed that Ca, Fe, K, Mg, Mn, Na and V were affected by natural sources while Cd, Cr, Cu, Ni, Pb and Zn were affected by anthropogenic sources. The measured values were remarkably higher in components from natural sources than in components from anthropogenic sources. Anthropogenic trace element concentrations of ground roof dust were higher than those of ground and underground indoor dust. A large percentage of trace elements came from natural sources rather than anthropogenic sources. The percentage composition of chemicals of ground roof dust were higher than those of ground and underground indoor dust. This study showed that investigated parking lots were rarely contaminated with hazardous heavy metals. The heavy metal pollution of ground roof were higher than those of ground and underground indoors. The correlation analysis among trace elements suggest that components in ground roof were more highly correlated than those in ground and underground indoor. Also anthropogenic trace element levels were well correlated with parking lot age and parking density.