• 환경영향평가
• /
• 제26권4호
• /
• pp.242-256
• /
• 2017

본 연구에서는 위험물질 누출 사고로 인한 영향을 예측하고 피해를 줄이기 위한 대응 방안으로 기상장(풍향 풍속)과 실제 도시 구조를 고려한 가상의 사고 시나리오를 구축하였다. 위험물질 확산에 대한 시나리오를 기반으로 서울시 강남 지역을 대상으로 보행자 환경에서의 위험특성을 분석하였다. 풍향과 풍속 조건에 따라 48개의 시나리오를 가정하였으며, 스칼라 물질의 확산 특성을 분석하기 위한 위험물질로써 불화수소를 가정하였다. CFD_NIMR_SNU 모델을 이용하여 모의한 기상장(풍향 풍속) 평가를 실시하여 모든 검증 지수가 유효한 범위 내에 나타남을 보였다. 보행자 고도에서 모의된 확산장 분석 결과, 도시의 인공적 구조에 의해 기상장의 조건에 따라 상세 흐름이 변화하며 위험물질이 확산되는 경향에 영향을 미치는 것을 확인하였다. 또한, 유입류의 풍속이 가장 약한 조건의 경우, 하층에서 유입방향의 역방향으로 흐름이 형성되어 보행자 고도에서의 물질 이동경로가 변화함을 보였다. 본 연구에서는 도시 지역의 난류흐름 형성에 도시의 인공적 구조가 매우 중요한 영향을 미치는 것을 보였다. 본 연구에 사용된 기술은 향후 실제 위험물질을 취급하는 도시 내 산업단지에 확산모의 실험과 보행자 환경에서의 위험성 평가에 유용할 것으로 기대된다.

• 방재기술
• /
• 통권15호
• /
• pp.22-27
• /
• 1993

The classification of hazardous area is a method of analysing and classifying the environment where explosive gas or vapour atmosphere may be expected to be present. The object of area classification is to enable the proper selection and installation of electical apparatus and other equipments. This report is intended to serve a general reference about the classification procedure of hazardous area with explanations of related Korean Standard.

• 한국대기환경학회지
• /
• 제15권4호
• /
• pp.513-517
• /
• 1999

Problems of secondary pollution and hazardous pollutants have rapidly come to the front in our society during the past few years. More attention should be paid to monitoring and assessment in order to identify the nature of complicated problems, but our air-quality policy is hurriedly seeking for management strategies. A typical example is air quality management in the industrial estates such as those located in Yochon and Ulsan. Yochon Industrial Estate was designated as a special air-quality management area of volatile organic compounds(VOCs) in 1996. And VOCs in the air of Ulsan Industrial Estate has been specially controlled since 1997. In this paper, however, it is suggested that hazardous air pollutants(HAPs) rather than VOCs should have been managed in the industrial estates. History of studies on organic compounds in the air of the industrial estates is reviewed. A stepwise approach for air quality management in the industrial estates is recommended.

• 한국대기환경학회지
• /
• 제15권3호
• /
• pp.235-247
• /
• 1999

This study was performed to investigate what was the most serious occupational factors in small scale industries. Twenty-three occupatonally hazardous substances were measured at the five workplaces in the Eastern Seoul during 1995∼1996. Total of 2,020 samples were analyzed by either GC/FID for organic vapors or AAS for heavy metals. From the results of this study noise was the most serious factor at the selected workplaces. Noise level in the metal processing, the printing, and the auto repairing industries exceeded the 8 hr PEL by 19.7%, 13.6%, and 11.6%, respectively. Mean concentrations of toluene in the shoe making and the printing industries exceeded the assessment crieterion by 6.0% and 3.8%, respectively. Further study of risk assessment of occupational exposure may be required to protect workers from hazardous working conditons.

• 한국대기환경학회지
• /
• 제12권4호
• /
• pp.479-485
• /
• 1996

Volatile organic compounds are air pollutants exhausting from industrial process, evaporation of solvent, and so on. Most of VOCs are the combustible gas of low calorific value as it is diluted by air. The systems burning such a hazardous gas need to increase enthalpy in order to increase flame stability. In this study an incinerator with reciprocating flow in the honeycomb ceramic has been used for the experiment of VOCs control. By the reciprocating flow system, the enthalpy of combustion gas is effectively regenerated into the enthalpy increases of the combustible gas through the honeycomb ceramic, which provides a heat storage. The position of the reaction zone is strongly dependent on the parameters of mixture velocity and time frequency. Flame front is changed to the point where burning velocity is coincided with burning velocity in the honeycomb ceramic. In this system it is important that flame front should be located symmetrically at the center of honeycomb ceramic for the purpose of increasing the reaction rate at one point. Peak temperature becomes higher with decreasing time frequency, at which the flow direction is regularly reversed.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.73-86
• /
• 1999

This study was performed to find out factors affecting degree of satisfaction with workers' working environment. The study subjects were 165 workers who were working at painting process of twelve furniture manufacturing factories in Incheon area. We used self-administered questionnaire containing general characteristics, working conditions, the degree of satisfaction with working environment, and the degree of satisfaction with working condition. In addition, we measured the exposure levels of occupational hazardous agents. The results were as follows; 1. Correlations between the degree of satisfaction with workers' working environment and the measured of occupational hazardous agents did not affect the degree of satisfaction with workers' working environment. 2. Factors affecting the degree of satisfaction with workers' working environment were not the exposure levels of occupational hazardous agents, but the degree of satisfaction with working condition, size of industry, health status, and types of ventilation system. As the degree of satisfaction with working condition was increased, the degree of satisfaction with working environment was increased. Also, for the workers who had good health status, the degree of satisfaction with work environment was appeared to be high. To increase the degree of satisfaction, with workers' working environment, firstly, effective work management and production control are required. Also, the worker's effort to negotiate continuously with top manager on improving working conditions is required. Secondly, developing heath promotion program to be appropriate for the characteristics of worksite is required. Moreover, leading worker's participation in health promotion program is very important to increase the degree of satisfaction with workers' working environment.

• 한국환경과학회지
• /
• 제23권7호
• /
• pp.1277-1287
• /
• 2014

As concerns have been raised about health effects of children's products containing hazardous chemicals on children, the Korea Ministry of Environment announced 135 environmental hazardous substances in children's products (EHSCP) which were subject to risk assessment. Therefore, it is necessary to identify the current status of EHSCP for management due to their various exposure routes and types. In this study, we investigated the exposure assessment of EHSCP as well as relevant policies implemented in domestic and foreign countries. Domestic and foreign cases of detection of EHSCP were reviewed in the literature and websites of related agencies. Due to the lack of reference values for child-specific toxicity of EHSCP, those for adults and regulatory status of EHSCP were also investigated and reviewed with literature. The related agencies of foreign countries provided 13 child-specific reference doses (RfDs), 76 RfDs, and 42 reference concentrations as toxicity reference values of the EHSCP. Among substances investigated in the studies to assess exposure of hazardous substances in children's products by the Korea Ministry of Environment, 23 substances were included in 135 EHSCP. The same studies identified 9 substances which were excluded from the 135 EHSCP. For regulatory status for hazardous substances in children's products, 44 substances (32.6 %) and 84 substances (62.2 %) of 135 EHSCP were under regulation in Korea and foreign countries, respectively. In the present study, we found that a list of 135 EHSCP should be revised to ensure children's safety.

• 한국환경보건학회지
• /
• 제43권2호
• /
• pp.103-110
• /
• 2017

Objectives: This study was performed to provide basic data for the re-establishment of standards (criteria) and analytical methods for hazardous metals in nail enamel. Methods: Ten metals (lead; Pb, arsenic; As, cadminum; Cd, antimony: Sb, cobalt; Co, nikel; Ni, copper; Cu, chromium; Cr, aluminum; Al, and mercury; Hg) were measured in 67 commercial nail enamels containing glitter and/or pearls. The content of hazardous metals (excepting Hg) was determined by using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES) after microwave digestion. Mercury content was measured by a mercury analyzer without any preparation. Results: The detected ranges of the intact samples were as follows: $ND-1.756{\mu}g/g$ for Pb, $ND-1.24{\mu}g/g$ for As, ND for Cd, $ND-20.41{\mu}g/g$ for Sb, $ND-12.36{\mu}g/g$ for Co, $ND-7.908{\mu}g/g$ for Ni, $0.088-79.27{\mu}g/g$ for Cu, $0.281-18.54{\mu}g/g$ for Cr, $13.78-3563{\mu}g/g$ for Al, and $ND-0.044{\mu}g/g$ for Hg. After centrifugation, the detected ranges of supernatant were as follows: $ND-0.435{\mu}g/g$ for Pb, $ND-0.504{\mu}g/g$ for As, ND for Cd, $ND-0.035{\mu}g/g$ for Sb, $ND-13.17{\mu}g/g$ for Co, $ND-0.232{\mu}g/g$ for Ni, $0.117-90.07{\mu}g/g$ for Cu, $0.174-2.787{\mu}g/g$ for Cr, and $9.459-1565{\mu}g/g$ for Al. The results of this analysis showed that the levels of heavy metals such as Pb, As, and Sb were much higher in the intact samples than those of supernatant. Conclusion: In the present study, we found that the levels of hazardous metals were significantly different depending on the status of the presence of glitter. Based on the results, we recommend that the product consumer refrain from prolonged application of nail enamel, avoid biting or chewing the nails, and wear gloves during cooking and washing dishes.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.452-460
• /
• 2013

This study conducted a performance evaluation of protective clothing materials used for welding in a hazardous shipbuilding industry work environment. The welding process was selected as the one that most requires industrial protective clothing according to work environment characteristics. Flame proofing and convection heat protection performance (HTI) in the heat transfer characteristics of protective clothing material were indicated in the order of SW1(Oxidant carbon)>SW2(silica coated Oxidant carbon)>SW4(Oxidant carbon/p-aramid)>SW3(flame proofing cotton). However, radiant heat protection performance (RHTI) and the heat transfer factor (TF) were indicated in the order of SW1>SW4>SW2>SW3 and showed different patterns from the convection heat protection performance. SW1 showed superior air permeability and water vapor permeability. The tensile strength and tear strength of welding protective clothing material were indicated in the order of SW4>SW2>SW3>SW1 and showed that a blend fabric of p-aramid was the most superior for the mechanical properties of SW4. SW1 had excellent heat transfer properties in yet met the minimum performance requirements of tensile strength proved to be inappropriate as being a material for welding protective clothing. The abrasion resistance of woven fabric proved superior compared to nonwoven fabric; however, seam strength and dimensional change both met the minimum performance requirements and indicated that all samples appeared non-hazardous. Finally, oxidant carbon/p-aramid blend fabric appeared appropriate as a protective clothing materials for welding.

• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.35-42
• /
• 2010

Due to the industrialization and urbanization, the transport of hazardous materials increases, which rises possibilities in occurring prospective accidents in terms of hazardous material transport as well. This study applied the model developed from the previous research to analyze the scale of damage areas from the accidents related to hazardous material accidents, as well as suggested a method to measure automatically the scale of accident including casualties and environmental damage based on the guideline which suggests the quantities of hazardous materials exposed from an accident and was defined in the study of standardization for hazardous material classification. A buffering analysis technique of Geographic Information System (GIS) was applied for that. To apply the model which evaluates the scale of population and exposure to environment on each link, rail network, zones, rail accident data, rail freight trips, and locations of rivers etc were complied as a database for GIS analysis. In conclusion, a method to measure damage areas by the types of hazardous materials was introduced using a Clip and a Special Join technique for overlay analysis.