• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.275-290
• /
• 2013

The main cause of building fire fatalities occur in the combustible material heat, smoke and toxic gases are. Building interior decoration, etc., especially as much of the harmful substances generated during combustion, and, used in domestic architecture wallpaper, ceiling, and other plastics, built-in foam insulation also analyzed recognition of fire hazards approach to test the conkalrorimiteo test, choedaeyeolbangchulryul through, chongbal heat, mass loss rate, generates carbon monoxide gas hazard ratio tests, analysis and evaluation rigid foam index testing the toxicity of hazardous material generated by performing a gas clean up and assess the material test results, the minimum order to provide data to quantify the risk of fire. Ensure fire safety of building materials, composite materials in order to test the various risk factors could be considered organic to the introduction of testing and evaluation is needed urgently.

• Journal of agricultural medicine and community health
• /
• v.44 no.3
• /
• pp.138-143
• /
• 2019

Objectives: The purpose of this study was to assess the ergonomic risk factors in beekeeping, and to evaluate the effectiveness of assistive device hive lift. Methods: This study included 30 subjects of beekeeper in Pocheon, Korea. We assessed the ergonomic risk of main task in beekeeping with NLE, OWAS and evaluate the effectiveness of hive lift. We also surveyed prevalence of musculoskeletal symptoms among the subjects based on the Korea Working Condition Survey. Results: Moving to different floral origin, internal inspection of beehives, feeding syrup is the most burdensome to musculoskeletal system (NLE LI value=2~3. OWAS action category=4). The prevalence of musculoskeletal symptoms (lower and upper extremities) among the subjects was over 80 %. The introduction of assistive devices in the three hazardous tasks has dramatically reduced the risk by removing manual lifting hives (OWAS action category<1). Conclusions: Beekeeping is a heavy workload on the musculoskeletal system because it has a lot of manual lifting task. As a result of applying the hive lift, the burden could be reduced.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.2
• /
• pp.31-39
• /
• 2017

Classify of explosion hazardous areas must be made at the site where flammable materials are used. This reason is that it is necessary to manage ignition sources in of explosion hazardous areas in order to reduce the risk of explosion. If such an explosion hazard area is widened, it becomes difficult to increase the number of ignition sources to be managed. The method using the virtual volume currently used is much wider than the result using CFD(Computational Fluid Dynamics). Therefore, we tried to improve the current method to compare with the new method using leakage characteristics. The result is a realistic explosion hazard if the light gas is calibrated to the mass and the heavy gas is calibrated to the lower explosion limit. However, it is considered that the safety factors should be taken into account in the calculated correction formula because such a problem should be considered as a buffer for safety.

• Safety and Health at Work
• /
• v.5 no.2
• /
• pp.43-52
• /
• 2014

Because information on biological agents in the workplace is lacking, biological hazard analyses at the workplace to securely recognize the harmful factors with biological basis are desperately needed. This review concentrates on literatures published after 2010 that attempted to detect biological hazards to humans, especially workers, and the efforts to protect them against these factors. It is important to improve the current understanding of the health hazards caused by biological factors at the workplace. In addition, this review briefly describes these factors and provides some examples of their adverse health effects. It also reviews risk assessments, protection with personal protective equipment, prevention with training of workers, regulations, as well as vaccinations.

• Korean Journal of Occupational Health Nursing
• /
• v.17 no.2
• /
• pp.126-137
• /
• 2008

Purpose : The purpose of this study was to investigate the difference in gender related to health status, occupational environment, occupational safety and health and hazardous chemicals use of migrant workers in Korea. Method: The survey was conducted in clinics that provided free healthcare services for migrant workers. Of the 413 respondents, 66.3% were males and 33.7% were females. Result: In the case of male migrant workers, many worker were not fluent in Korean, had illegal status in the country, and had moved jobs frequently. There were many cases in which migrant workers worked in small-scale enterprises and worked long hours. Job stress score was high for many workers and they dealt with heavy materials and risky machines. Many workers had not received proper occupational health and safety education and those that were previously injured had repeated injuries. Among the female migrant workers, many worker received low salary and shift work was common. Many worker complained of gastrointestinal and musculoskeletal illnesses and treated toxic substances. Conclusion: As a result, it will be necessary to focus on the strategies for decreasing occupational injuries from physical risk factors for males and from chemical risk factors for female migrant workers.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.295-306
• /
• 2009

The risk assessment of groundwater and soil in Sasang industrial complex in Busan Metropolitan City was carried out in order to estimate risks to human health and the environment. The carcinogenic risk (CR) of receptors to soil and air was not identified. However, the CRs for TCE and PCE were 6.7E-6 and 1.0E-5, respectively. Hazard quotient (HQ) and hazard index (HI) did not appear through air exposure pathways. Yet the HQ and HI of soil were 3.4E-5 and 5E-5, respectively, and lower than the critical value (1.0). On the contrary, HQ and HI with respect to groundwater were calculated as 0.7 (not hazardous) and 1.4 (hazardous). The constituent reduction factor (CRF) for TCE in the study area was determined as 2.5, and thus remediation work is demanded. As a result of sensitivity analysis for 18 exposure factors, eight exposure factors (life time of carcinogens, age, body weight, exposure duration, exposure frequency, dermal exposure frequency, water ingestion rate, and soil ingestion rate) varied with the variation of risk.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.699-708
• /
• 2015

This study was performed to identify the state of the exposure and characteristics of pollutants by each process at 4 casting sites located in Gyeongsang-do from April to November 2013. The concentrations of methanol, crystallized silica glass, formaldehyde and phenol were analyzed by different process - casting process, molding process, core process, and shakeout & finishing process. The highest concentration of methanol was found in casting and molding process, whereas the highest concentration of crystalline quartz(Silica) was observed in core process. The most oxidized steel dusts and the highest concentration of fume were found in shakeout & finishing process. As a result of this study, those labors working at the casting site were found to be constantly exposed to various forms of hazardous chemicals; therefore, it is considered that this is the time to manage and plan how to reduce them. In addition, it is required to thoroughly manage the local exhauster, and improve the process and working environment to reduce various forms of hazardous chemicals.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.2
• /
• pp.226-235
• /
• 2019

Objectives: The purpose of this study was to investigate whether there were differences in manufacturing industry worker's health issues depending on job stress, fatigue, and health and safety services. Methods: The purpose of the questionnaire survey and its contents were explained to manufacturing industry health personnel, and the questionnaires were collected from 666 workers from 17 manufacturing workplaces. Questionnaires with missing data were excluded from the analysis so a total of 632 questionnaires were included. Results: Overall, 74.1% of the respondents had experienced health issues during the preceding month. The factors affecting worker health were number of workers(OR=1.000034, p=.013), job demand(OR=1.82, p=.009), MFS(OR=1.85, p=.003), provision of safety & health information(OR=1.85, p=.048), wearing protector(OR=2.58, p=.021). Conclusion: It is necessary to strengthen the safety and health education to mitigate hazardous and risk factors. Employers should provide health managers in charge of safety and health education to control workplace risk factors. In case of small businesses, it may be necessary to strengthen safety and health education in existing worker health centers and government support projects.

• Journal of Navigation and Port Research
• /
• v.46 no.5
• /
• pp.400-408
• /
• 2022

Maritime transportation is one of the most complicated and hazardous business fileds. Maritime accidents still occur despite several precautions since maritime is exposed to natural factors more than any other industries. In this harsh environment as a part of their job, marine pilots often embark/disembark to/ from vessels and confront life-endangering personal accidents. In the maritime field, several risk assessments are applied. However, all of them could not evaluate occupational accident risk for maritime pilot specifically. This paper performs specific risk analysis using the bow-tie method based on past accident records. This paper aims to qualify root causes and quantify root causes by importance level according to occurrence probability. As a result of analysis, occupational accident occurrence probability is found to be 14%, indicating that accident occurrence rate is significantly high. Hence, the probability of root causes triggering accidents and accident occurrence probability can be ascertained so that preventive measurements can be implemented. Besides theoretical achievement, this paper provides safety awareness to marine pilots, Marine Pilot Organizations, and ship crew who play a key role during marine pilots' transfer.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.89-112
• /
• 2000

Although dental laboratory technicians are prone to be exposed to various work-related health hazardous materials such as dusts, chemicals, etc., the prevalence and nature of work-related health problems of them have not been a matter of great concern in the field of occupational health service in Korea. The purpose of the present investigation was to describe a collected profile of subjective health symptoms and their attributable factors in Korean dental laboratory technicians. A questionnaire listing five groups of health symptoms and five health symptom-related factors was mailed to randomly selected 1,900 dental laboratory technicians. Among them, 1,344 dental laboratory technicians filled out the questionnaires and returnde them. Five groups of health symptoms included musculoskeletal symptom, dermal symptoms, respiratory symptoms, eys symptoms, and ear symptoms. Five health symptom-related factors were occupational environment-related health risk factors, work history, health related habits and status, use of personal protective equipment and general characteristics. Detailed parameters of health risk factors were work posture, vibration, and chemical or physical hazards such as dust, fume, vapor, solvent, light, and noise for occupational environment-related factors; work place, area, number of employees, work hours, career, work part, and work load for work history; Broca's index, hours of sleep, eating, smoking, alcohol, exercise, health examination, and self assessed health status for health habits and status; face masks, goggles, and so on for use of personal protective equipment, and; age, sex, marital status, and education for general characteristics. Before the start of main survey, a pilot survey was carried out for validity and reliability tests of the questionnaire. All the data obtained were coded and analyzed with PC/SAS 6.12 program. The prevalence of health symptoms was the highest in musculoskelton (87.3%), and followde by eyes (78.9%), respiratory organs (64.3%), ears (57.8%), and skin (52.2%) in descending order. Statistically significant risk factors by multiple logistic regression analyses were sex, health examination, self assessed health status, and hand/finger posture in musculoskeletal symptoms; sex, self assessed health status, career, acid gas, and hand contact with resin mixture in deraml symptoms; Broka's smoking, exercise, self assessed health status, and face mask in respiratory symptoms; sex, hours of sleep, self assessed health status, work hours, work load, plaster dust, inadequate lighting, and goggle in eys symptoms, and eating, smoking, self assessed health status, and work load in ear symptoms. With the above considerations in mind, prevalence of subjective symptoms among Korean dental laboratory technicians was relatively high, and they were attributable to most of the occupational environment-related factors, work history, use of personal protective equipment, health habits and status, and general characteristics. Particularly, it is suggested that health promotion programs for promoting self- assessed health status and smoking cessation, preventive measures for protection of the female technicians’health, and reducing work load be necessary, since those factors were associated with more than one subjective symptom.