• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.732-739
• /
• 2014

This research was performed to investigate the effect of recent climate changes on wood decay hazard index (Scheffer index) in Korea. The index was determined using a climate data of 58 different locations obtained from the website of Korea Meteorological Administration (KMA), and the wood decay hazard index was determined at the intervals of 10 years. Most of regions in Korea except Juju island showed wood decay hazard index values between 35 and 65, considered to be moderate decay hazard zones. But in recent 10 years (2003~2012), the wood decay hazard index was rapidly increased, resulting in showing many high decay hazard regions. The trend may be explained by the in crease of temperature and precipitation. The recent climate change of Korea turning into the weather of subtropical region may explain the increase of wood decay hazard index.

• Journal of Environmental Health Sciences
• /
• v.47 no.2
• /
• pp.144-154
• /
• 2021

Objectives: This study was intended to identify hazard contribution by region, media, and chemical by calculating a hazard-based index using pollutant release and transfer register (PRTR) data. Methods: PRTR data for the period 2011 to 2016 was analyzed to examine the regional trends in toxic releases in terms of quantity and to create a corresponding hazard-based index. For the hazard-based index, the Risk-Screening Environmental Indicators (RSEI) Model was used. Results: The results of the trend analysis show that total releases decreased slightly, but health hazard levels increased consistently. According to the outcome of regional contribution analysis of the hazard-based index, Chungcheongnam-do, Jeollabuk-do and Gyeonggi-do Provinces showed a high ratio in the index for air and water release pollutants, while Gyeongsangbuk-do and Gyeongsangnam-do Provinces showed a high ratio in the index of soil release and waste transfer pollutants. Also, as a result of the analysis of the top ranked substances in the hazard-based index, it was found that chromium, cobalt and its compounds, and ethylene oxide contributed greatly to air release substances, while chromium, benzene, and lead and its compounds contributed greatly to water release substances. Conclusion: These results showed considerable disparities between total release and health hazard levels, especially in the analysis of contribution by regions and by chemical substance. Therefore, the hazard-based index should be used both to support a more comprehensive and robust approach to screening of chemicals for environmental health policy and for management.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.531-537
• /
• 2011

This research was performed to evaluate the decay hazard for exterior above-ground wood in Korea. The Scheffer index (decay hazard index) was determined using the climate data of 72 different locations obtained from the website of Korea Meteorological Administration (KMA), and the wood decay hazard map was created. Jeju, Seogwipo, Gwangju, and Jeonju showing above 65 of Scheffer index values were considered to be high decay hazard zones. The rest showed the values in the range between 35 and 65, meaning the moderate decay hazard zones. However, the annual Scheffer indexes largely varied, which suggests that many moderate decay zones could turn into high decay regions with the climate change. Especially, considering that Korean weather tends to turn into the weather of subtropical region, the decay hazard of Korea seems to have high possibility to be gradually increased.

• Journal of Ecology and Environment
• /
• v.35 no.4
• /
• pp.323-329
• /
• 2012

The Standardized Precipitation Index (SPI) is a widely used drought index to provide good estimations of the intensity, magnitude and spatial extent of droughts. The objective of this study was to analyze the spatial pattern of drought by SPI index. In this paper, the patterns of drought hazard in Iran are evaluated according to the data of 40 weather stations during 1967-2009. The influenced zone of each station was specified by the Thiessen method. It was attempted to make a new model of drought hazard using GIS. Three criteria for drought were studied and considered to define areas of vulnerability. Drought hazard criteria used in the present model included: maximum severity of drought in the period, trend of drought, and the maximum number of sequential arid years. Each of the vulnerability indicators were mapped and these as well as a final hazard map were classified into 5 hazard classes of drought: one, slight, moderate, severe and very severe. The final drought vulnerability map was prepared by overlaying three criteria maps in a GIS, and the final hazard classes were defined on the basis of hazard scores, which were determined according to the means of the main indicators. The final vulnerability map shows that severe hazard areas (43% of the country) which are observed in the west and eastern parts of country are much more widespread than areas under other hazard classes. Overall, approximately half of the country was determined to be under severe and very severe hazard classes for drought.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.373-385
• /
• 2009

A new indexing methodology so called KTH-index was developed to quantitatively evaluate a potential level for tunnel collapse hazard, which has been successfully applied to tunnel construction sites to date. In this study, an attempt is made to apply this methodology for validating an outcome of tunnel design by checking the variation of KTH-index along longitudinal tunnel section. In this KTH-index simulation, it is the most important to determine the input factors reasonably. The design factor and construction condition are set up based on the designed outcome. Uncertain ground conditions are arranged based on borehole test and electro-resistivity survey data. Two scenarios for ground conditions, best and worst scenarios, are set up. From this simulation, it is shown that this methodology could be successfully applied for providing quantitative validity of a tunnel design and also potential hazard factors which should be carefully monitored in construction stage. The hazard factors would affect sensitively the hazard level of the tunnel site under consideration.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1294-1301
• /
• 2010

In this study, a case study, where a hazard management for tunnel collapses has been quantitatively undertaken based on the KICT Tunnel Hazard(KTH) index, is presented. From this, it was able to timely inform the field engineers when the more detailed investigation is required for checking if any risky factor is shown on the tunnel face. At the same time, variable additional information such as sensitivities of major influence factors are also provided to field engineers from the methodology given in this study. The additional information would be helpful for better understanding of tunnel hazard level at the current tunnelling stage and following the required actions for more detailed checks of risky factors.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.431-438
• /
• 2002

Reclaimed coastal areas for the construction of ports and harbors are in general subjected to strong possibility of liquefaction. In this research, a new method for liquefaction hazard microzonation based on liquefaction settlements was developed. Severity of liquefaction hazard was defined by liquefaction settlements obtained from the method proposed by Tokimatsu and Seed. 10 coastal areas, representing typical geological and geotechnical characteristics of Korean ports and harbors, and 3 real earthquake records for site response analysis were selected. From this research, liquefaction settlement criteria is adapted as a new quantitative index for the liquefaction hazard microzonation. Liquefaction settlements were also compared with LPI (Liquefaction Potential Index), obtained from the assessment of liquefaction potential based on the modified Seed and Idriss's method. As an example, 2 and 3 dimensional liquefaction hazard microzonations of Pusan port and harbor area were mapped by overlapped liquefaction settlement contours.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.257-258
• /
• 2015

The amount of damages caused by natural hazards is consistently growing due to the unusual weather and extreme events. At the same time, property damage by natural hazards is rapidly increasing as well. Hence, we need systematic anti-disaster activities and consulting that can react to such a situation. To address these needs, we investigated and analyzed insured claim payouts from natural hazards by administrative area, and calculate the risk index utilizing GIS. According to the index, this map is identifying the areas of greatest natural hazard risk. The ranking of natural disaster vulnerability based on the risk index, and risk grades were divided into five based on the ranking. This map integrates the natural hazard losses to assist in comprehensive and effective loss prevention activities using analysis of regional loss claims from natural hazards. Moreover, this map can be as utilized as loss mitigation and prevention activities to verify the distribution of exposure and hazards.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.37-51
• /
• 2017

Despite the improvement in accuracy of heavy rain forecasting, socioeconomic costs due to heavy rain hazards continue to increase. This is due to a lack of understanding of the effects of weather. In this study, the risk of heavy rain hazard was analyzed using the concepts of hazard, vulnerability, and exposure, which are key concepts of impact forecast presented by WMO. The potential impacts were constructed by the exposure and vulnerability variables, and the hazard index was calculated by selecting three variables according to the criteria of heavy rain warning. Weights of the potential impact index were calculated by using PCA and hazard index was calculated by applying the same weight. Correlation analysis between the potential impact index and damages showed a high correlation and it was confirmed that the potential impact index appropriately reflects the actual damage pattern. The heavy rain hazard risk was estimated by using the risk matrix consisting of the heavy rain potential impact index and the hazard index. This study provides a basis for the impacts analysis study for weather warning with spatial/temporal variation and it can be used as a useful data to establish the local heavy rain hazard prevention measures.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1246-1249
• /
• 2009

Liquefaction hazard caused by earthquake is the damage in a wide range. Until now, liquefaction hazard potential at a small area or most structure in Korea was assessed by modified Seed & Idriss method. However, it has been known that this method is not proper for metropolitan area due to a lot of time and data to perform the related ground response analyses such as Shake program. For these reasons, the current method has been used facilities or structures, not metropolitan area. In this study, several contents in seismic design of Eurocode and Korean seismic design standard for Port and Harbor were introduced and applied for assessing the liquefaction potential and mapping the liquefaction hazard by LPI(Liquefaction Potential Index). Finally, Ulsan metropolitan city was practically drawn in two dimensional space.