• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.88-92
• /
• 2000

Excessive soil water in paddy field induces growth losses during the vegetative stages of soybean plants. Our objectives were to know growth responses of soybean as affected by the level of ridge heights. A field experiment was conducted at the Research Farm of Korea University near Seoul in 1996. Ten cultivars of soybean (Glycine max (L.) Merrill) were planted at the ridge heights of 10, 30, and 50cm in paddy soil on 27 June. Total dry matter accumulation at the 10cm ridge height was severely decreased until the growth stage of R5 as compared to the ridge heights of 30 and 50cm, and this decrement was mainly due to both reduced leaf and stem dry weights. However, seed dry weight was not significantly decreased at the lower ridge height with the increment of harvest index. Cultivar differences were found on seed dry weight, crop growth rate from R1 to R5, and leaf/stem ratio of R5. From the above results, soybean growth responses to excessive soil water in paddy field were different between seed filling stage and late vegetative to early reproductive growth stages.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.74-79
• /
• 2019

In this study, an edible fresh corn harvest testing machine was designed and manufactured. And harvesting performance was analyzed through the field test. The testing machine is of the tractor attached type. It is connected to the tractor PTO shaft to transfer power to the each part of the harvesting machine. And it harvests fresh corn by one row through the processes of cutting, stem crushing, detaching, and collecting. The performance test was performed at PTO speed (540, 750, 1050 rpm, respectively), working speed (0.1, 0.15, 0.2 m/s, respectively), and cropping cultivation (row spacing·hill spacing 70·25 cm, 70·40 cm, 90·30 cm, respectively). The performance test was repeated three times in the 15 m section. The detachment loss ratio, uncollected crop ratio, damage ratio, and harvest ratio were analyzed. As a result of the performance test, it was analyzed that the PTO speed 540 rpm, running speed of 0.1 m/s, and row spacing·hill spacing 70·40 cm were the optimal condition.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.304-312
• /
• 2018

This study investigates to identify the impact factors of timber production cost on the relationship between production cost components and revenues generated by evaluating the entire timber supply chain. In this research, selected 13 logging zones as target areas and classified 14 forest production cost factors, six groups. Additionally, established 13 externalenvironmental factors with related stakeholders and forestry experts. And the BCR (Benefit Cost Ratio) method was then used to analyze the economics of each zone. Filled up a checklist and rated using 5 point scale for each target region, and extracted major cost factors for the production economy of the item. The analysis of major cost factors in the timber production revealed that wood grab equipment usage fee was the first ranked and forest trees purchase cost was ranked in the $2^{nd}$Also, the $3^{rd}$ranking was logging expenses, and transport cost, which accounted for 84% of the total cost, was ranked in the $4^{th}$. In addition, the rock land ratio, slope, timber payment (forest trees purchase cost), special timber, ratio of timber, DBH (Diameter at Breast Height), and mixed forest ratio were the factors that most affected the timber supply chain cost.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.4
• /
• pp.199-217
• /
• 1975

For the establishment of efficient method of potassium topdressing on rice the optimum time and amount were investigated and discussed on the basis of available data from nutriophysiological studies, soil characteristics and fertilizer trials in fields. The followings were pointed out. 1. According to yield rice plants require more potassium around heading under water culture. 2. Potassium involves in harvest index, filled grain ratio, grain weight and number of spikelets per panicle. 3. Potassium is lost after heading in most fields in spite of highest requirement during this period. 4. The higher $K_2O/N$ ratio in straw at harvest is, the higher the yield. 5. Relatively low efficiency of potassium fertilizer under the field condition may be due to improper application method rather than natural supply from soil and irrigation water. 6. Appropriate topdressing time appears at in effective tillering stage for the prevention of nitrogen excess and at 15 to 20 days after transplanting, ear formation stage and 5 days after heading for the prevention of soil reduction damage. Two times of topdressing for clayey soil and three times for sandy soil seems reasonable in practice together with nitrogen topdressing, 7. The reasonable ratio basal to topdressing of potassium fertlizer seems to be 2/3 and $N/K_2O$ ratio of fertilization for ear formation stage appeared also as 2/3.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.7-10
• /
• 1999

Physicochemical properties of Satsuma mandarin(Citrus unshiu Marc. var. miyagawa) harvested in middle of November according to production areas of Cheju were investigated. Peel thickness of citrus fruits was ranged from 2.54mm to 3.13mm, and it was lower on fruits harvested in western areas than those of other areas in Cheju. Soluble solids were ranged from 10.1 to 12.0$^{\circ}$Brix, and it was lower on fruits harvested in southern areas. Acid contents of citrus juice were ranged from 1.28% to 1.42%, it was higher on fruits harvested in eastern areas, specific gravity of citrus fruits was ranged between 0.86 and 0.88. Flesh ratio was ranged from 75.1% to 77.6%, it was lower on fruits harvested in southern areas. Soluble solids, acid content and specific gravity harvested in southern areas of below 100m and over 150m sea level altitude were 11.8 and 11.2, 1.43% and 1.40%, 0.87 and 0.9, respectively. Fruits quality harvested in southern areas was better, compared to other harvest areas of Cheju.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.5
• /
• pp.290-292
• /
• 2015

We have reported about bipolar resistive switching effect on Poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]:Graphene oxide composite films, which are sandwiched between aluminum and indium tin oxide electrodes. In this case, I-V sweep curve showed a hysteretic behavior, which varied according to the polarity of the applied voltage bias. The device exhibited excellent switching characteristics, with the ON/OFF ratio being approximately two orders in magnitude. The device had good endurance (10⁵ cycles without degradation) and long retention time (5 × 10³ s) at room temperature. The bistable switching behavior varied according to the trapping and de-trapping of charges on GO sites; the carrier transport was described using the space-charge-limited current (SCLC) model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1889-1910
• /
• 2017

This paper investigates a protocol so-called Adaptive Harvest Then Transmit (AHTT) for wireless powered communication networks (WPCNs) in multiple-input single-output (MISO) downlink systems, which assists in transmitting signals from a multi-antenna transmitter to a single-antenna receiver. Particularly, the power constrained relay is supplied with power by utilizing radio frequency (RF) signals from the source. In order to take advantage of multiple antennas, two different linear processing schemes, including Maximum Ratio Combining (MRC) and Selection Combination (SC) are studied. The system outage capacity and ergodic capacity are evaluated for performance analysis. Furthermore, the optimal power allocation is also considered. Our numerical and simulation results prove that the implementation of multiple antennas helps boost the energy harvesting capability. Therefore, this paper puts forward a new way to the energy efficiency (EE) enhancement, which contributes to better system performance.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.12-20
• /
• 2016

Purpose: Pepper prices have risen continuously because of a decrease in cultivation area; therefore, mechanical harvesting systems for peppers should be developed to reduce cost, time, and labor during harvest. In this study, a screw type picking head for a self-propelled pepper harvester was developed, and the optimal working conditions were evaluated considering helix types, winding directions of helix, and rotational speeds of the helix. Methods: The screw type was selected for the picking head after analyzing previous studies, and the device consisted of helices and a feed chain mechanism for conveying pepper branches. A double helix and a triple helix were manufactured, and rotational speeds of 200, 300, and 400 rpm were tested. The device was controlled by a variable speed (VS) motor and an inverter. Both the forward and reverse directions were tested for the winding and rotating directions of the helix. An experiment crop (cultivar: Longgreenmat) was cultivated in a plastic greenhouse. The test results were analyzed using the SAS program with ANOVA to examine the relationship between each factor and the performance of the picking head. Results: The results of the double and triple helix tests in the reverse direction showed gross harvest efficiency levels of 60-95%, mechanical damage rates of 8-20%, and net marketable portion rates of 50-80%. The dividing ratio was highest at a rotational speed of 400 rpm. Gross harvest efficiency was influenced by the types of helix and rotational speed. Net marketable portion was influenced by rotational speed but not influenced by the type of helix. Mechanical damage was not influenced by the type of helix or rotational speed. Conclusions: Best gross harvest efficiency was obtained at a rotational speed of 400 rpm; however, operating the device at that speed resulted in vibration, which should be reduced.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.1
• /
• pp.30-36
• /
• 1995

Pasture composed of about 30% botanical composition of white clover (Trijolium repem L.) is desirable in its productivity and quality. To get information on maintaining its productivity in the pasture, the experiment was canied out to determine the effect of infrequent, frequent defoliation or their alternation on change of its harvest yield and growth. Individual plants of Regal, Louisiana S-1, Grasslands Huia and Aberystwyth S184 were grown in 22cm plastic pot containing a 2 : 1 : 1 soil : sand : Peat moss mixture for 27 days after transplanting 50day seedlings raised on 3cm pots, and then all their fully expanded leaves are removed. Defoliation treatments were forced every 1 (CC, frequent), 4 week (RR, infrequent) or their alternations (CR, RC) after 8 weeks from the removal. To analyze the treatment effects, plants were sampled on 0 (the removal day), 4, 8, 12 and 16 weeks after the removal and seperated to leaves, petioles, stolons and roots. Each harvest yield of infrequent defoliation (RR) was higher than that of frequent defoliation (CC). Their alternations (RC, CR), however, forced fluctuation of the yield according to defoliation interval. Fraction weights from their altemations showed intermediate ones of infrequent and Frequent defoliation whose weights did the similar result to their harvest yields. Fraction and total dry weights per plant, shoot/root ratio were changed by relative span of defoliation interval, which resulted from the weights of leaves and petioles, removed parts. Root and total dry weight per plant of Regal were greater than the other cultivm in infrequent defoliation interval regardless of continuous or alternations. Productivity of white clover in pasture, therefore, can be controlled by alternation of infrequent and frequent defoliation or reverse.