• The Korean Journal of Ecology
• /
• v.28 no.5
• /
• pp.287-293
• /
• 2005

This study was conducted to evaluate the effect of the conventional pesticide application system on the rice spider community based on the quantitative investigation of arthropod community in the rice fields in Saran area, Hwasung-si, Kyeonggi-do from 1996 to 1998. Spiders were the highest dominant group comprising over 90% of all natural enemies in their density, and showed very stable yearly occurrence. In these fiekds the mean density of spiders was about 10 individuals/$0.25m^2$ during the rice growing season, and three families including Lycosidae, Tetragnathidae and Linyphiidae were very abundant. The colonization of spiders occurred in early season and they showed rapid density increase in mid-season. They maintained the highest density to the late season and their density decreased at harvest season. In the years of the low rice pest occurrence, the disturbance effect on spider community by pesticides were less. Two dominant species, Pirata subpiraticus and Pachygnatha clerki, had different population dynamics; Pirata subpiraticus showed the rapid density increase in the mid-July, and most of them remained immature stages, however, in the case of Pachygnaths clerki population, they rapidly increased in the late August and most of them remained adult stage during the late growing season.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.5
• /
• pp.405-412
• /
• 1992

Growth characters of dry seeded paddy rice was studied at different levels of nitrogen(N) split application (basal : immediately after irrigation : 2 weeks after irrigation: 25 days before heading: heading stage with 10 : 20 : 30 : 20 : 20%, 20 : 30 : 20 : 20 : 10%, 30 : 40 : 0 : 20 : 10%, and 100% basal of slow release urea) in tillage and no-tillage systems. On May 17 in 1990, 6kg /10a of dry seeds of a breeding line of Milyang 95 was broadcasted and covered with a power tiller. Between tillage and no-tillage systems yield and its components, lodging related characteristics, and contents of cellulose, hemicellulose and lignin of culm base were similar. Leaf area index at heading stage was higher in tillage, but lodging index was lower compared with those in no-tillage plot. Culm length, effective tiller ratio, culm base weight, 1000-grain weight, harvest index in slow release N applied plot were higher compared with those in other N treatments. Grain yield of rice among levels of N split applications was similar in tillage, but it was higher in slow release N applied plot in no-tillage if 1kg /10a of additional N was applied as urea at panicle formation stage. At early growth stage N concentration and N uptake were lower in the slow release N applied plot, but higher after heading stage compared with other N treatments. The number of tillers was lowest in slow release N applied plot during the tillering stage, but the number of panicles per hill was similar to other N treatments.

• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.351-356
• /
• 2008

This study was carried out to assess adoptability and environment impacts of ultra low volume (ULV) pesticide spray solutions aerially sprayed by manned-helicopter. Uniformity of the deposited amount in paddy fields was uneven, showing $3.1{\sim}4.7$ times differences among surveyed sites. Drifting distance of aerially sprayed droplets from the target area was within 30 m in the wind direction and 20 m in the opposite direction. Most of the aerially sprayed pesticides were deposited in/on rice plants, while those in submerged paddy water and soil were relatively small. The degradation rate of the deposited pesticides was in the decreasing order of rice plants, paddy water and soil. Soil residues of pesticides in the aerially sprayed rice paddy fields after harvest ranged from non-detected to 0.201 mg/kg. However, no pesticides were detected in brown rice and rice straw. No phytotoxic symtoms were observed in rice plants and nearby non-target crops by the sprayed pesticides.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.253-260
• /
• 2014

Purpose: This study investigated the harvesting properties of the giant miscanthus (Miscanthus ${\times}$ giganteus) to measure the required mowing power for different stem conditioning methods in order to shorten the drying time after mowing and the bale density so that the crop can be used as biomass in the winter season. Methods: The required mowing power and bale density were measured using a power measurement device, three different mower-conditioners, and a mid-sized round baler under different working speeds and conditioning methods. Results: For the various mower-conditioners, the average stem length from mowing was 0.86-0.91 m, and the available working speed was 1.6 m/s. The steel roller-type mower-conditioner showed better stem conditioning but could not mow over a working speed of 1.6 m/s. The required average power of the mower-conditioners varied from 23.8 kW for the steel roller-type rotary disk mower-conditioner with a working width of 2.4 m to 37.2 kW for the flail-type rotary disk mower-conditioner with a working width of 3.2 m at a working speed of 1.6 m/s. The bale densities were $155.8-172.2kg/m^3$. The highest bale density was measured for stems with no conditioning and a moisture content of 11.3% (d.b.) mowed by the rotary disk mower. The bale density was affected by the mowing method because of the low moisture content of the miscanthus stems. Conclusions: In terms of the working performance and conditioning statue, the steel roller-type mower-conditioner is a better choice at a working width of 2.4 m, while the flail finger-type mower-conditioner is better at a working width of 3.2 m. The type of mower-conditioner used for giant miscanthus harvesting should be determined by considering the harvest area, workable period, and working performance of a mower-conditioner and baler during the winter.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3897-3920
• /
• 1975

Since the most of Korean dairy and cattle raising farms are too small to introduce western mechanized farming, it is necessary to develope small size equipments. This study has been carried to develop a rotary mower as on attachment of 8 to 10 horse powertiller which is widely spread in rural area. It will not ony be helpfull for the farmers to harvesting hay grass but also desirable to increase the power tiller utility. The protto type rotary mower designed through the fundamental investigations, has been modified and improved through the field trials, and a series of field tests has been carried to investigate its performance and economic feasibility comparing with existing vailable harvesting equipments. The results are as follows; 1. To increase the stability, two guide wheels are attached to both side of the protto type rotary mower. 2. To prevent the clinging of tall grasses, the vertical driving shafts are covered with cylindrical protectors. 3. The cutting height is adjustable in 8 steps from 2.5 to 20 centimeters by changing the length of guide wheel legs. 4. The practical Critical cutting speed were always higher than theoretical value in both case of single cutting blade and three when the cutting depth was 25 millimeter. 5. The peripheral speed of cutting blade was varied in response to the change of engine speed, mean while the peripheral speed was adequate as it was changhed from 25 to 35 meter per second when the power tiller is operated in proper working ground speed. 6. The time requirement to harvest 10 a were 88.7, 54.6 and 41.4 minutes for the first, second and third stage of ground speed respectively, and because of the difficulty of delivery, it was observed that operating with fourth stage of ground speed was not recomanendable when the grass height is taller than 90 centimeters. 7. The performance of rotary mower were 1.1-1.7, 1.4-4.0, 3.8-11.8 and 7.4-22.0 times of reciprocating mower, portable disc type cutter, hay scythe and ordinary sickle respectively. 8. When the slope exceeds, 20 degree the downward harvesting operation was impossible because of the excessive front end weight, while less than 5 degree of land slope did not effect in field operation. 9. Increased traveling spee caused higher cutting height and slight cutting failure, but seems not to effect to the gross yield, and the efficiency of cutting width were from 83 to 94 precent. 10. Tn rank of economy were rotary mower (3,2 stage operation), reciprocating mower, hay scythe, portable disc type cutter and sickle in order when the annul operation exdeeds 100 hours. From the above results, it is convinced that the protto type rotary mower is good enough to the livestock farmers as a hay harvesting equipment because of its economy, hardiness in operating and its out standing performance and hopefully it will contribute to the extension of Korean livestock farming.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.105-109
• /
• 1994

This experiment was conducted to know the labor saving effect and reducing production cost by agricultural mechanization in the cultivation of Bupleurum falcatum. Labor reducing effects of the drilling seeder by hand and the machine attached to two wheel tiller were 97%, but emergency rate was highest in the former. Dry root yield per plant was increased by low amount of seed sowing but that yield per unit area was increased at much seeding amount in the seeder attached to the tiller. The drilling seeder by hand was showed highest standing ratio of seedling and produced yield to 84.1kg of root yield per 10a. Labor saving effect was the best at the multipurposes mechanized harvester and labor saving and famer's income ratio were increased to 69% and 50% respectively. Labor time and cost were reduced to 74% and 69% respectively by mechanization of sowing and harvest cultivation practice on Bupleurum falcatum.

• The Korean Journal of Ecology
• /
• v.24 no.1
• /
• pp.51-59
• /
• 2001

Estimation of the annual net production, nitrogen (N) and base cation (BC＝K, Mg, Ca) uptake by stocked forests in South Korea has been done with national statistical data of forestry from 1995 to 1999. The annual net production of stems and branches was about 1.8 ton DM ha/sup -1/ yr/sup -1/. The net productivity of deciduous forests was higher than that of coniferous forests. Total net production of the stocked forests from the whole stocked area of South Korea of 6.246×10/sup 6/ ha, was about 1.13×10/sup 7 ton DM/yr, and the total harvested biomass obtained from timber production data in 1999, was estimated about 6.1×105 ton DM/yr that was equivalent to 98 kg DM ha/sup -1/ yr/sup -1/f. Net growth uptake of N and BC were 350 mol ha/sup -1/ yr/sup -1/ and 296 mol ha/sup -1/ yr/sup -1/ respectively, and the content of N and BC contained in the harvested biomass were 20 mol ha/sup -1/ yr/sup -1/ and 16 mol ha/sup -1/ yr/sup -1/ respectively. Net uptake of N was higher than that of BC. Total net uptake of N and BC from growth and harvest by stocked forests in South Korea were 2.309×10/sup 9/ mol/yr and 1.953×10/sup 9 mol/yr respectively.

• Journal of Radiation Protection and Research
• /
• v.21 no.1
• /
• pp.51-58
• /
• 1996

Underground migration of $^{54}Mn,\;^{60}Co,\;^{85}Sr\;and\;^{137}Cs$ in paddy and upland conditions was studied through two years' greenhouse experiment. At early and late growth stages of rice, soybean, Chinese cabbage and radish, a mixed solution of the radionuclides was applied to the water or soil surfaces of the culture boxes filled with an acidic loamy-sandy soil for the upper 20cm. Soil was sampled in layers upto $15{\sim}20cm$ down after harvest. Soil concentrations of the radionuclides decreased exponentially with increasing soil depth and more than 80% of the radioactivities remained in top $3{\sim}4cm$. The mobility of the radionuclides decreased in the order of $^{85}Sr>^{54}Mn>^{60}Co{\geq}^{137}Cs$. Downward migrations of the radionuclides were the greatest in rice soil and the lowest in soybean soil which was fertilized with the least amount of N, P and K. Differences in depth profiles between two application times indicate that the amount of daily migration from $0{\sim}1cm$ layer to the lower area decreases with increasing time after deposition. By a simultaneous addition of KCl and lime following the earlier application, downward migration in soybean, Chinese cabbage and radish soils changed little or retarded more or less but that in rice soil accelerated a little.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.3
• /
• pp.250-256
• /
• 2004

Background : Bacterial infections in diabetic patients are an important cause of increased morbidity and mortality. It has been reported that bacterial infections in diabetics showed more impaired PMN functions such as reduced PMN respiratory burst and decreased microbicidal activity in inflammed tissues. Also, apoptosis(programmed cell death) is postulated to be a key mechanism for neutrophil elimination. It is very important that PMN apoptosis keeps the balance from an area of inflammation. Actuallly, as little was known about PMN apoptosis and respiratory burst in diabetes, we investigated PMN apoptosis and hydrogen peroxide production after endotoxin exposure. Methods : Peripheral venous blood samples were collected by routine venipuncture from healthy volunteers and diabetics to harvest neutrophils. We respectively measured the PMN apoptosis, the production of hydrogen peroxide, and the cell viability. Results : Normal neutrophils showed a tendency to decreased apoptosis after endotoxin treatment. In patients with diabetes, PMN apoptosis was significantly decreased compared with healthy controls. In addition, the LPS-induced neutrophils in diabetics demonstrated more decreased apoptosis. However, the production of hydrogen peroxide was not different between groups. Conclusion : These observations suggest that the decreased PMN apoptosis in diabetics with endotoxin exposure may also affect the increased susceptibility and severity of infections.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.371-375
• /
• 2014

This study was carried out to get the basic data to practically design an artificial light-used plant factory system for common ice plant (Mesembryanthemum crystallinum L.) cultivation. The adequate range of light intensity was $120-200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and the carbon fixed rates was $0.84nmolCO_2{\cdot}cm^{-2}{\cdot}s^{-1}$. When the planting density, light intensity, and yield were $0.0225m^2$ ($15{\times}15cm$), $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and 1,000 plants per day, the total number of the plants, cultivated area, and total light intensities were estimated as 25,000 plants, $563m^2$, and $140,625{\mu}mol{\cdot}s^{-1}$, respectively. About 153.2kW with 2,785 fluorescent lights (FL) needed for the electric power and the electricity charges was 2.46 million won for one month. At a harvest rate of 1,000 plants per day in closed-type plant factory, the light installation cost, total installation cost, and total production cost were 27.85, 83.56, and 100.27 million won, respectively. The production cost per plant including labor cost was calculated as 370 won, providing that the cultivation period was 25 days and marketable ratio was 80%. Considering the annual total expenses, incomes, and depreciation cost, the sales cost per plant could be estimated around 970 won or higher.