• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.98-104
• /
• 2009

In this paper, improved VCO(voltage controlled oscillator) with push-push structure and high impedance-inverter is designed and implemented. Two harmonic oscillators are combined into push-push structure. As a result, the fundamental suppression and the output power have been progressed. For the improved coupling characteristics between hair-pin resonator and two parallel microstrip line using high impedance inverter, the phase noise has been suppressed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.89-96
• /
• 2012

In this paper, a low phase noise oscillator is designed using an interdigital hairpin resonator for UTIS (Urban Traffic Information Systems). The interdigital hairpin resonator has several characteristics compared with a conventional hairpin resonator, which are 70% size reduction and improvement of harmonic characteristics. In addition, Q (Quality factor) of the interdigital hairpin resonator is about 132, which is suitable for the design of a low phase noise oscillator. The oscillator suggested in this paper shows the output power of 12 dBm and the phase noise characteristic of -100.8 dBc/Hz at 100 kHz offset frequency from the center frequency of 5.75 GHz. The phase noise is improved by about 12 dB compared with a conventional oscillator using an interdigital hairpin resonator.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.45-52
• /
• 2005

In this paper, we propose the PLL system of the local oscillator system for the millimeter wave band's radio astronomy receiving system. The development of the proposed local oscillator system based on the YIG oscillator VCO with $26.5\~40GHz$ specification. This system consists of the oscillator part including the YIG VCO, the harmonic mixer, and the isolator, the RF processing part including the triplexer, limiter, and RF discrimination processor, and the PLL system including YIG modulator and controller. Based on this configuration, we verify the frequency and power stability of the developed local oscillator system according to some temperature variation. From this test results we confirm the stable output frequency and power characteristic peformance of the developed LO system at constant temperature.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.513-517
• /
• 2003

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator} applied to X-band as stable source is implementea and constructed with a MESFET for low noise, a dielectric resonator of high frequency selectivity and high Q varactor diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated through the harmonic balance simulation technique to provide the optimum performance. The measured results of a fabricated VCDRO show that output is 2.22dBm at 12.05GHz. harmonic suppression -30dBc. phase noise -130dBc at 100kHz offset. and sweep range of varactor diode $\pm$18.7MHz. respectively. This oscillator will be available to X-band application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.398-402
• /
• 2003

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator) applied to FMCW(Frequency Modulated Continuous Wave)Radar as stable source is implemented and constructed with a MESFET for low noise, a dielectric resonator of high frequency selectivity, and high Q varator diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated thrash harmonic balance simulation technique to provide the optimum performance. The measured result of a fabricated VCDRO shows that output is 2.22dBm at 12.05GHz, harmonic suppression -30dBc, phase noise -130dBc at 100kHz offset, and sweep range of varator diode $\pm$18.7MHz, respectively. This oscillator will be available to FMCW Radar.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.89-95
• /
• 2003

In this paper, we have designed and fabricated high conversion gain Q-band active sub-harmonic mixers for a receiver of millimeter wave wireless communication systems. The fabricated active sub-harmonic mixer uses 2nd harmonic signals of a low local oscillator (LO) frequency. The fabricated mixer was successfully integrated by using $0.1{\;}\mu\textrm{m}$GaAs pseudomorphic high electron mobility transistors (PHEMTs) and coplanar waveguide (CPW) structures. From the measurement, it shows that maximum conversion gain of 4.8 dB has obtained at a RF frequency of 40 GHz for 10 dBm LO power of 17.5 GHz. Conversion gain from the fabricated sub-harmonic mixer is one of the best reported thus far. And a phase noise of the 2nd harmonic was obtained -90.23 dBc/Hz at 100 kHz offset. The active sub-harmonic mixer also ensure a high degree of isolations, which are -35.8 dB from LO-to-IF and -40.5 dB from LO-to-RF, respectively, at a LO frequency of 17.5 GHz.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.76-84
• /
• 1997

In this paper, one of the core components of a mobile communication system, VCO(Voltage Controlled Oscillator) IC is designed. The VCO IC was designed, have realized as LC turned oscillator using varicap. LC sinusoidal tuned oscillator generally requires external inductors and thus remainding circuit is implemneted in monolithic IC. The circuit is fabricated using an 15 mask IC process and has a die size of 1150um${\times}$780um. The tests showed that VCO was operated at frequencies in the regions between 880MHz-915MHz in the control voltage range of 1V to 3V at 5V supply voltage and as the power supply was varied from 4.5V to 5.5V, the frequency varied 425KHz/V. The VCO IC has frequency shift of 1.97MHz/T, carrier level of -7dBm and power consumption of 16.7mA. Also it has phase noise of -80dBc/Hz, offset at 50KHz and harmonic response of center frequency is -41dBm. For the future development of the transceiver 1 chip, the previously mentioned external devices need to be incorporated into Si MMIC.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.19-22
• /
• 2014

In this paper, Ku-band low phase noise oscillator using DSRR structure resonator based on metamaterial was proposed. To improve the phase noise of the oscillator, the proposed resonator consist of a DSRR strcuture based on metamaterial. The proposed resonator have a characteristic of $S_{11}$ is -0.25 dB, and $S_{21}$ in -44.59 dB at 14.67 GHz, respectively. At 14.67 GHz, the proposed Ku-band low phased oscillator achieves a output power of 2.03 dBm, $2^{nd}$ harmonic of -36.04 dBc, and phase noise of -130.63 dBc at the 100 kHz offset, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.250-256
• /
• 2008

In this paper, an X-band oscillator is presented using a new miniaturized microstrip hairpin resonator. The newly designed hairpin resonator on the microstrip line employs the spiral structure, which shows a higher loaded quality factor and the 50 % reduced circuit area compared to the conventional one at 9.2 GHz. The oscillator using proposed resonator shows the output power of 10.87 dBm, the second harmonic suppression of 41.99 dBc, and the phase noise performance of -101.49 dBc/Hz at 100 kHz offset, which is better than the conventional resonator oscillator by 6.17 dB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.69-76
• /
• 2004

In this paper, a VCDRO (Voltage Control Dielectric Resonator Oscillator) with low phase noise for X-band application has been designed and fabricated. A low noise and low flicker noise MESFET and a high Q dielectric resonator were selected to obtain good phase noise Performance. Also, a varactor diode having high Q, qualify factor was used to reduce the loading effects and a big Gamma of diode was chosen for linearity of frequency over voltage tuning range. The fabricated circuits was simulated with circuit design tools, ADS to provide the optimum performances. As the measured results of fabricated oscillator, the output power was 5.8 ㏈m at center frequency 12.05㎓ and harmonic suppression -30㏈c, phase noise -114 ㏈c at 100 KHz offset frequency, respectively, and the frequency tuning range as the function of valtage applied to varactor diode was 15.2 MHz and its power variation with frequency was 0.2 ㏈. This oscillator could be available to a local oscillator in X-band.