• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.3
• /
• pp.165-169
• /
• 1998

In August 1996, seawater salinity and nutrient distribution were investigated at surface waters in the South Sea of Korea. The low-salinity (< 20.00 psu) waters were observed in the western and southwestern offshore areas of Cheju Island. Relatively low saline (< 30.0 psu) waters occupied most of the survey areas only except in the eastern part. The observed minimum salinity was lower by 11.78 psu than that of the average between 1963 and 1995. The low saline waters appeared in the upper layer of generally 10-20 m deep, and were obriously distinguished from high-salinity (> 32.00 psu) waters, 30 m deep. The low saline waters may originate from the freshwater discharge of vast amount of from Yangtze River during the heavy rainfall season in China. Phosphate concentrations in the surface waters were relatively low and were less variable than those of nitrate and silicate. The maximum concentrations of nitrate and silicate occured in the western and southwestern offshore areas of Cheju Island, where the salinities were the lowest. The concentrations of nitrate and silicate were inversely correlated with salinity, whereas that of phosphate showed a considerable scatter and non-conservative behaviours. This indicates extensive desorption reactions of suspended materials releasing phosphate.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.3
• /
• pp.224-234
• /
• 2007

This study aimed to examine the harmful effects of Mn and Fe, which may be generated as dust or fume in the industrial sites, on the body and genital organs by their inhalation. It is intended to find the characteristics and differences of the hazardousness by inhaling a single and the mixed materials of Mn and Fe. Male F344 rats were divided into the control group and 3 exposed groups on the basis of the test material compound (Mn $1.5mg/m^3$, Mn 1.5 and Fe $3.0mg/m^3$, Fe $3.0mg/m^3$). The 4 groups were divided into 4 subgroups again on the basis of the exposure period (4 and 13 weeks) and the recovery period (4 and 13 weeks). The exposure condition was 6 hours a day, 5 days a week for the whole body. Clinical tests including changes in weight and feed rate, blood biochemical test, motility change, changes in the number and the amount of spermatozoon (sperm count), daily sperm production (DSP), deformity test of spermatozoon and changes in the accumulation of Mn and Fe in blood and internal organs were performed. Motility was reduced by Mn exposure. Especially, the effect of Mn was exposure period responsible. By mixing with Fe, no significant change in motility Mn and Fe accumulation in organs was observed. Sperm count and daily sperm production (DSP) were decreased by Mn. Additional effect like the reduction of sperm count and DSP, and delayed restoration of sperm count and DSP during the recovery period were observed in the mixed exposure group. These results indicate that Mn and Fe may affect the motility reduced and has male reproductive toxicity. Mixed exposure of Mn and Fe lead to synergic effects on the male reproductive toxicity.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.610-621
• /
• 2018

In conservation treatment lacquer has been used variously as a restoration material. However, dealing with Lacquer is very difficult as it dried in high humidity that can be harmful to the base materials. Also being natural varnish, dried lacquer layer is very different from the drying condition and the quality of the lacquer. These make difficult to predict the result of drying lacquer. In this study, using the humidity control machine, firstly, the main contents of the two different type of lacquer was experimented. And these lacquers was cured in various conditions. The duration time was checked until totally hardened. After that, obtained lacquer layers was analyzed to understand optical properties. Therefore, this study made a result about the relationship between characteristics of lacquer layer and the hardening condition. As a result, duration time of the Korean lacquer drying which has average 13.4% more urushiol than the Chinese lacquer is recorded a twice or triple decrease over it of the Chinese one. And, in all types of lacquer, the higher humidity makes the faster a pace of lacquer dried. In same lacquer, the shorter the duration time of drying lacquer is much darker and glossier. However, gloss deteriorated in saturated humidity. In humidity lower than RH 70%, lacquer is not hardened in 336 hours. When the layer totally cured through long period more than 30 days, the drying lacquer is appeared high brightness and almost transparent. Thus, in lower than RH 70%, it is hard to obtain durable layer.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.100-106
• /
• 2011

This study was conducted to investigate the residue amount of harmful materials on the 113 commercial fruit teas (Gugija, Omija, Sansuyu) in Gwangju area. It was performed using the GC-ECD, GC-NPD, GC-MSD and the LC-UVD, LC-FLD, LC-MSD to analyze 200 pesticides. The heavy metals were determined using a Mercury analyzer and AAS. The sulfur dioxides were analyzed by modified Monnier-Williams method. The residual pesticides were detected in 4 samples (Gugija). The mean values of heavy metal contents (mg/kg) were Pb, 0.024; Cd, 0.031; As, 0.010; Hg, 0.003. The measured values of Pb, Cd, As, Hg showed within MRLs. The sulfur dioxides were over MRLs in 4 samples (Gugija). These results will be used to establish on the regulation of commercial fruit teas in Gwangju area.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.903-907
• /
• 2015

Background: Among human epidermal growth factor receptor 2 (HER2)-positive breast cancer, more than half are also hormone receptor (HR)-positive. Although HR is a predictive factor for the efficacy of hormone therapy, there are still some uncertainties in regard to the effects on patients with HR-positive and HER2-positive metastatic breast cancers due to the potential resistance to hormone therapy caused by co-expression of HR and HER2. There are no clinical trials directly comparing the efficacy of hormonal therapy with chemotherapy. Materials and Methods: To examine the real-world effect of hormone therapy on patients with HR-positive and HER2-positive metastatic breast cancers, a cross-sectional study of a representative sample of the Chinese population was conducted. The study included 113 patients who received first-line and second-line palliative treatment between 2005 and 2010 in the Cancer Institute and Hospital, Chinese Academy of Medical Science. The effect of hormone therapy on overall survival (OS) was studied. Results: The patients who received hormone therapy (n=51) had better overall survival in contrast to those who received chemotherapy with anti-HER2 therapy (n=62) in first- or second-line treatment. The difference was of borderline statistical significance (51.8m vs 31.9m, p=0.065). In addition, the effect of hormone therapy did not differ significantly with other prognostic factors, including age (${\leq}50$ years or >50 years), disease free survival (${\geq}2$ years or < 2 years) and site of metastasis (visceral or bone/soft tissue). On multivariate analysis, administration of hormone therapy was associated with a trend toward a favorable prognosis (p=0.148, HR=0.693, 95%CI 0.422-1.139). Age more than 50 years was the sole independent harmful prognostic factor (p<0.001, HR=2.797, 95%CI 1.676-4.668). Conclusions: Our data suggest that hormonel therapy may improve outcomes of the patients with ER-positive and HER2-positive metastatic breast cancer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.216-221
• /
• 2017

Diesel engines have the highest brake thermal efficiency among internal combustion engines. Therefore, they are utilized in medium and large transportation vehicles requiring large amounts of power such as heavy trucks, ships, power generation systems, etc. However, diesel engines have a disadvantage of generating large quantities of nitrogen oxides during the combustion process. Therefore, the authors tried to reduce the amount of nitrogen oxides in marine diesel engines using a wet-type exhaust gas cleaning system utilizing the undivided electrolyzed seawater method. In this method, electrolyzed seawater in injected into the harmful gas discharge from the diesel engine using real seawater. The authors investigated the reduction of NO and NOx from the pH value, available chlorine concentration, and the temperature of electrolyzed seawater. The results of this experiment indicated that when the electrolyzed seawater is acidic, the NO oxidation rate in the oxidation tower is higher than that when the electrolyzed seawater has a neutral pH. Likewise, the NO oxidation rate increased with the increase in concentration of chlorine. Further, it was confirmed that the electrolyzed seawater temperature had no effect on the NO oxidation rate. Thus, the NOx exhaust emission value produced by the diesel engine was reduced by means of electrolyzed seawater treatment.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.699-713
• /
• 2012

Palustrine wetland is often used for development work and green area creation. However, the ecological characteristic of vegetation is not frequently considered in planning. Therefore, this study was conducted to investigate vegetation characteristic according to land-use of palustrine wetland and to provide basic materials in assessment of palustrine wetland and restoration and creation of wetland. Survey sites were caterogized into paddy, field, and mountain. Each category had two sites, so total 6 survey sites were investigated for vegetation. As a result, with a range of 61~92 species, total 216 taxa were confirmed, consisting of 71 families, 168 generic, 187 species, 2 variety 1 forma 1 subforma. Mountain received a high score in the evaluation score range of floristic regional indicator plants, and it was found that there were 10 families and 28 species of naturalized plant. Mountain showed low appearance, and fiddy and field showed relatively high appearance. Naturalized plants with slightly high vegetation cover ratio are Erigeron annuus, Amorpha fruticosa, Dactylis glomerata, Festuca arundinacea, Eragrostis curvula, Trifolium repens, Erigeron Canadensis, Ambrosia trifida, Oenothera odorata, Bidens frondosa, etc. Such naturalized plants should be removed to prevent terrestrialization of wetland and its harmful damages. Long-term monitoring and proper management of naturalized plants are expected to improve palustrine wetland into high quality biotope of rural area in the future.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.33-54
• /
• 1995

The degree of conversion of composite resin was known to have influence on the mechanical properties of composite materials such as hardness, strength, wear resisitance, dimensional and color stability. Also unreacted monomer was reported to be harmful to the pulp. So the degree of conversion was a very important factor in the success of composite resin restorations. In recent, the dual cure resin cement was developed with the advocations that it could increase the curing rates in the sites where the curing ligt could not reach. Moreover many manufactors added some adhesive components in the resin cement. This study was undertaken to observe the effects of curing depth and light curing times on the degree of conversion of dual cure resin cements. CR INLAY CEMENT, DUAL CEMENT and OPTEC BOND, by the Fourier transform Infrared analysis, changing the curing depth 1mm, 2mm and 3mm, and varying the light curing time 20 seconds, 40 seconds and 80 seconds at each depth. The cytotoxicity of dual cure resin cements was tested by the in vitro MTT method using L929 cell. The results was evaluated and compared statistically. The results were obtained as follows : 1. The dual cure resin cements reavealed various degree of conversion, CR INLAY CEMENT and DUAL CEMENT had a tendency to be more reactive to the light cure and OPTEC BOND was a more chemical one. 2. CR INLAY CEMENT and DUAL CEMENT showed the lowest degree of conversion in 2 mm depth, and in 3mm depth the degree of conversion increased, which were due to the chemical cure of dual cures, but OPTEC BOND showed decreasing degree of conversion with increasing curing dept h and all experimental groups showed lower degree of conversion than CHEMICAL group which cured in dark room with no light, so the weak light-curing of dual cure resin cement prevented the chemical cure. (P<0.05) 3. CR INLAY CEMENT and DUAL CEMENT showed increasing degree of conversion in 1 mm and 3 mm, according to the increasing cure times, but in 2 mm depth the degree of conversion decreased with increasing light-curing times and OPTEC BOND showed contrary tendency, but there was no ststistical importance in the differences among the experimental group.(P>0.05) 4. The optical density by MTT assay of extractions of CR INLAY CEMENT, DUAL CEMENT and OPTEC BOND revealed no statitically important differences comparing with optical density of negative control.(P>0.05) 5. CR INLAY CEMENT showed a tendency of increaing cytotoxicity with days and DUAL CEMENT and OPTEC BOND showed higher cytotoxicity in 2 days than in 4 days, but there was no statistical importance in the differences.(P>0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.200-207
• /
• 2016

The automotive seat is an important component that moves in sync with the driver and is actively being developed with various new functions. The aim of this work is to develop a lightweight seat cushion extension module using a lightweight material. To this end, a structural strength analysis, vertical strength test, and durability test were conducted. In the structural analysis, the maximum value of deformation under vertical load was 4.98 mm at the front of the upper panel. The maximum stress was approximately 105 MPa, which occurred at the point of contact between the upper and lower panels of the module. The vertical strength test showed a maximum vertical deformation of 5.31 mm under a vertical load, which differed from the analysis results by approximately 6.45%. The structural safety of the product was verified by the fact that it showed no harmful deformation or damage during operation after the vertical strength test and a durability test for 20,000 cycles. Furthermore, the use of engineering plastics made it possible to reduce the weight by approximately 30% compared to existing products. The lack of damage after tests verified the passenger safety, strength, and rigidity of the product. The results are expected to be applied for improving environmental and fuel efficiency regulations and preventing accidents due to driver fatigue. The applications of this module could be expanded various types of vehicles, as well as other industries in which eco-friendly and lightweight materials are used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.384-390
• /
• 2018

Air and soil are being contaminated by the environmental pollution as a result of climate change and urbanization, resulting in water pollution reaching serious levels. In this studies, we investigated the use of antimicrobial copper for the removal of biological pollutants from water system. Specifically, we tested its effects against E. coli, B. subtilis, S. aureus, K. pneumoniae and P. aeruginosa. Made a sphere shape having a diameter of 2cm using a strip-shaped copper wire of 0.5g, 1g and 2g. And then, to confirm the antimicrobial activities, each copper ball was equipped in the broth which inoculated each pathogens. The results showed that bacterial growth of the five test bacteria was inhibited by more than 99% after reaction with a 0.5 g copper ball for at least 20 minutes. Based on the these results, if perform the further experiment such cytotoxicity, it is expected that will be enough to be used as a filter for water quality purification. The developed technique is expected to be widely applied in various industries.