• ETRI Journal
• /
• v.35 no.5
• /
• pp.931-934
• /
• 2013

The weight calculation in an iterative algorithm is the most computationally costly task in computed tomography image reconstruction. In this letter, a fast algorithm to speed up the weight calculation is proposed. The classic square pixel rotation approximate calculation method for computing the weights in the iterative algorithm is first analyzed and then improved by replacing the square pixel model with a circular pixel model and the square rotation approximation with a segmentation method of a circular area. Software simulation and hardware implementation results show that our proposed scheme can not only improve the definition of the reconstructed image but also accelerate the reconstruction.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.112-119
• /
• 2021

In the Fourth Industrial Revolution and the foundation of software and hardware technologies through ICT, the technology to analyze the principles of information processing activities is the ability to implement programming. In this study, to improve the programming academic performance of electronics majors, firstly, we presented an effective teaching method in order to promote employment in the programming field by improving problem-solving skills and logical thinking skills in the programming field that electronics majors do not prefer. Secondly, we plan to promote intelligence informatization by converging intelligence information technology into the existing electronics industry by developing software utilization skills through programming curriculum that reflects the specificity and reality of electronics. Lastly, as computer programmers, we would like to expand creative talent education by developing learners' capabilities to cultivate smart talents who have both hardware and software capabilities.

• Journal of KIISE:Software and Applications
• /
• v.34 no.8
• /
• pp.697-707
• /
• 2007

Since embedded software is very dependent for target hardware architecture, characteristics of the platform must be considered when designing the software. Furthermore, MPSoCs consists of heterogeneous hardware components that are specified in micro level. Thus mapping of embedded software for MPSoCs should be considered the characteristics. In this paper, we provide an approach to automatic mapping PIM (Platform Independent Model) of an embedded software to PSM(Platform Specific Model) for MPSoC(Multi Processor System On Chip) and verify its effectiveness with simulation. In the proposed approach, tasks are derived from an object oriented model based on the UML (Unified Modeling Language). And then the types of the derived tasks are identified. With the identified types and inter relationship between tasks, the tasks are assigned to appropriate heterogeneous hardware components. We expect that the approach improve accuracy of the assigning and concurrency of the deployed software.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.65-68
• /
• 2000

In this paper, as a compatible software radio transmission system, Digital-Radio conversion system which can directly change the digital signal generated by the logic circuit into radio signal is proposed. By the vector synthesis method, the digital signals can change directly into radio signal. If such a circuit is realized, RF circuit and an antenna can be composed by the simple one device, and the radio is directly controlled and performed by the software processing which is the essence of software radio. This Digital-Radio conversion system of this paper give many number of communication channels being offered by PN code and offer a hardware design flexibility by digitization, therefore it decrease the percentage ratio of hardware of system and give a more flexible function of software basis. In this paper, this proposed Digital-Radio conversion system is called D/R converter, and the principle of this D/R converter, radio signal generation algorithm is explained and the performance characteristics of proposed algorithm is shown in time base by the computer simulation method.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.1-5
• /
• 2020

As the world gradually advances to an aging society, the quality of human life is valued. Among them, 'quality of sleep' is very closely related to quality of life. Recently, Korea expanded health insurance coverage for "sleep disorders". Particularly, as the number of sleep multiple tests and prescriptions for sleep aids has increased rapidly, much attention has been focused on the related medical service environment. Therefore, this study looked at an in-depth interview of 11 hospitals to see what treatment delivery system is being established when the government applies health insurance for 'sleep disorders'. In conclusion, the organizations with the most average number of sleep polyp tests per day were found to have more sleep polyp labs (hardware) and more full-time specialists. Also, the polysomnography lab (hardware) and the specialist's full-time status (software) did not necessarily result in a "positive pressure regulator prescription" that can solve "sleep apnea" caused by "sleep ailments". Rather, it was found that the number of days of sleep multiple laboratories (hardware), the number of full-time specialists (software) or the specialty majors (software) had a greater impact. In particular, the higher the specialist's full-time personnel (software) index (=6.000), the higher the sleep-inducing agent prescription rate(=1.000), and the lower the specialist's full-time personnel (software) index (=1.000), the higher the sleep-inducer's prescription rate(= 0.010) Was low. In addition, even if the professional full-time personnel(software) index was the same (=1.000), the hospital type was lower as it was closer to the public hospital(=0.067) and higher at the specialized hospital (= 0.933). In the case of university hospitals, when the full-time specialists (software) are in the same condition (= 1.000), the frequency of use of the sleep laboratory (=1.000) and the sleep test rate (= 1.000) were all the same.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.321-328
• /
• 2014

Software defined radar (SDR) is a multi-purpose radar system where most of the hardware processing is performed by software. This paper introduces a concept and technology trends of software defined radar, and addresses the advantages and limitations of the current SDR radar systems. For the advanced SDR concept, the KAU SDR Model (KSM) is presented for the multimode and multiband radar system operating in S-, X-, and K-bands. This SDR consists of a replaceable multiband antenna and RF hardware, common digital processor module with multimode, and open software platform based on MATLAB and LabVIEW. The new concept of the SDR radar can be useful in various applications of the education, traffic monitoring and safety, security, and surveillance depending on the various radar environments.

• Archives of design research
• /
• v.17 no.4
• /
• pp.119-128
• /
• 2004

There is a lack of user centered design methods that support effective collaboration between designers and end-users for designing hardware and software integrated digital products. This paper presents the application of Collaborative Design and a new collaborative design prototyping tool for interactive digital product design projects. The tool consists of STCtools(State Transition Chart tools) software, hardware modeling materials, and physical interface toolkits for integrating software and hardware. STCtools allow users to create and edit States, to compose Events describing transitions between States, and to run intermediate or final results of STC. Using the hardware modeling materials and the physical interface toolkit, designers and end-users can collaborately examine the hardware and software integrated concepts in an early stage of the design process. Three collaborative design workshops of designing a portable digital guide for a theme park were accomplished to examine the feasibility of the tool. The results suggested that the tool supported iterative concept development and interactions between designers and end users. Although several user interface problems of STCtools were identified, the participants gave positive feedback on the role of the tool in collaborative concept generation and deployment. It is expected that the results of this study contribute not only to the collaboration between designers and end users, but also to the collaboration between designers, and between designers and other professionals.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.691-698
• /
• 2006

TCP/IP Offload Engine (TOE) is a technology that processes TCP/IP on a network adapter instead of a host CPU to reduce protocol processing overhead from the host CPU. There have been some approaches to implementing TOE: software TOE based on an embedded processor; hardware TOE based on ASIC implementation; and hybrid TOE in which software and hardware functions are combined. In this paper, we designed software modules and hardware modules for a hybrid TOE on an FPGA that had two processor cores. Software modules are based on the embedded Linux. Hardware modules are for data transmission (TX) and reception (RX). One core controls the TX path and the other controls the RX path of the Linux. This TX/RX path separation mechanism can reduce task switching overheads between processes and overcome poor performance of single embedded processor. Hardware modules deal with creating headers for outgoing packets, processing headers of incoming packets, and fetching or storing data from or to the host memory by DMA. These can make it possible to improve the performance of data transmission and reception. We proved performance of the TOE with separated transmission and reception paths by performing experiments with a TOE network adapter that was equipped with the FPGA having processor cores.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.320-325
• /
• 1997

It is very diffcult to applied ergonomics data & experiments in industrial design. At the industrial design process attempted toadoption a egonomics. But sometimes easyto use ergonomics data and at other times very hard to adopted a element into a design process. Industrial design of the essence is a sensual act. As ergonomics data is to the hardware, sois the design sense to the software. The harmony are important to hardware & software of design process. New products demand to new form. Therefore, designer neglect to ergonomics experiments for user. Anyway, ergonomics experiments & data endlessly applied to more things year after year. This paper show improved computer front design with graphic, knobs size & control panel tilt angle.

• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.7-17
• /
• 2009

The development of wireless communication MAC layer is usually released as SoC which is a combination in hardware and software. In this system development environment, an environment for software development and verification is necessary because the hardware development takes a lot of time priori to completion. In integrated development of hardware and software, simulation environment of hardware and software provided by hardware modeling using HDL at RTL and ISS respectively. By increasing the development complexity of system, ESL design modeling systems at higher abstraction level than RTL has already prompted. The ESL design is divided untime model and time model. This paper present design and implementation of MCU for untime model simulation, not time model. Proposed MCU can optimize the system at early step of system development and move up the development completion time by verifying the system function easily and rapidly than part required exact time in untime model. In this paper, we present an MCU module based on SystemC and UC/OS-II Module providing real-time operate system.