• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.203-206
• /
• 1998

열가소성 탄성체(Thermoplastic elastomers)의 일종인 polyurethane은 상온보다 높은 유리전이온도(T$_{g}$)를 갖는 hard segment(HS)와 낮은 T$_{g}$를 갖는 soft segment(SS)간의 열역학적 불친화성으로 인해 미세 상분리 구조를 갖는다. SS는 낮은 T$_{g}$로 인해 상온에서 rubbery한 성격을 나타내며 HS는 높은 T$_{g}$로 인해 물리적 가교 역할과 충진제 역할을 한다. Polyurethane은 중합당시의 조성이나 중합방법에 따라 다양한 내부구조를 갖으며 이런 내부구조의 변화에 따른 물리적 성질의 변화 역시 다양하다. (중략)

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1361-1364
• /
• 2003

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.253-259
• /
• 2005

Polyurethanes, synthesized by polyester polyols and aliphatic or aromatic diisocyanates for a crease resist finishing agent, were prepared by two-step reactions, that is, prepolymer synthesis and chain extension. The structures of synthesized polyurethanes were confirmed by the measurement of FT-IR and $^1H$-NMR spectrometer. The number average molecular weight ($\bar{M}_n$) and the weight average molecular weight ($\bar{M}_w$) of the polyurethane with aromatic diisocyanate (MDI) were higher than those of the synthesized polyurethanes with aliphatic diisocyanate (HDI, $H_{12}MDI$). The glass transition temperatures ($T_g$) of soft segments in polyurethanes with MDI, HDI, $H_{12}MDI$ were -25,-42 and -50$^{circ}C$, respectively. In the polyurethanes obtained by two-step reaction, thermal stability and tensile strength increased with increasing hard segment contents, whereas elongation at break decreased with increasing hard segment contents.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.442-449
• /
• 2010

Polyurethane(PU) prepolymer was synthesized from ethylene oxide/propylene oxide(EO/PO) random polyether polyol, toluene diisocyanate and chain extender such as ethylene glycol and 1,4-butanediol. PU foams having various compositions were fabricated from PU prepolymers with different hard segment contents(%) and mixed foaming solution of different compositions. PU foam from chain extender-introduced PU prepolymer and mixed foaming solution containing glycerin showed better mechanical property than other groups. Various PU foams were tested on their mechanical property, moisture vapor transmission rate, absorption speed, absorptivity, morphology and cell culture test. According to the test, the PU foam fabricated from chain extender-introduced PU prepolymer and mixed foaming solution containing optimum composition of F-68, glycerin and CMC was found to have the best property for wound dressing materials. From in vivo animal study, it was confirmed that above PU foam showed rapid wound recovery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.6
• /
• pp.509-514
• /
• 2005

Purpose: In order to clarify the clinical utility of the vertical height augmentation (VHA) genioplasty using autogenous iliac bone graft (IBG), this study examined the postsurgical changes in hard and soft tissues of the chin and the stability of the grafted bone. Patients and Methods: Twenty-three patients who had undergone VHA genioplasty using autogenous IBG were evaluated radiographically and clinically. A comparison study of the changes in hard to soft tissues after surgery in all 23 patients was performed with preoperative, 1-month, 3-months, 6-months, and/or 1-year postoperative lateral cephalograms by tracing. Stability, bone healing, and complication of the grafted bone was evaluated by follow-up roentgenograms and clinical observation. Results: Between the preoperative and 6-month postoperative tracings, an average vertical augmentation of the osseous segment was 4.2 mm at menton and that of the soft tissue menton was 4.0 mm. There was a high predictability of 1: 0.94 between the amounts of hard versus soft tissue changes with surgery in the vertical plane. The position of the genial bone segment was stable immediately after surgery and soft tissue was not changed significantly from 1 month to 1 year after operation. Clinical and radiological follow-up results of the iliac bone graft showed normal bony union and were generally stable. Conclusions: VHA genioplasty using IBG is a reliable method for predicting hard and soft tissue changes and for maintaining postoperative soft tissue of the chin after surgery.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1188-1196
• /
• 2004

In this paper a determination of the optimal segment sealing material for a tunnel under the Han river between the Sungsoo-dong, Sungdong-Gu and the Chungdaw-dong, Kangnam-Gu in the Bundang railway. The geological investigation results show that some fractured zones exist loca]]y under the northern boundary of the Han river bed, but the other regions consist mostly of hard rocks of good Quality in the tunnel excavation level. Also, a hign water pressure of $5kgf/cm^2$ and a flash inflow of river water due to old boring holes are expected during tunnel excavation. A combined type sealing material of EPDM gasket with expansional rubber is selected as a optimal segment sealing material for the Han river tunnel considering the geological and site conditions.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06a
• /
• pp.43-44
• /
• 1993

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.123-127
• /
• 2012

In order to establish the cause of the deformation of polyurethane foam, compression set was measured according to the aging temperature and time. FT-IR, TGA, DSC and DMA were used for investigating the cause of deformation of aged PUF. The results of FT-IR and TGA reveals that no structure change occurred during deformation of PUF. Resilience of aged PUF was reduced by the increase of reduction ratio in storage modulus over the glass transition temperature of hard segment.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.513-518
• /
• 2012

Polyamide 12 (PA12) oligomers (oPA1) were prepared by dispersion polymerization of ${\omega}$-amino carboxylic acid and dibasic acid in a dispersion medium, thermally stable hydrocarbon liquid paraffin, YK-D130 (a step polymerization). The molecular weight and various properties of other oligomeric PAs (oPA2) obtained by bulk polymerization without the medium were compared with those of oPA1s. The oPA1s showed lighter white color and narrower molecular weight distribution than oPA2s at the same molecular weight. Moreover elastomeric poly(ether-block-amide) (PEBA)s were synthesized with oPA1 and oPA2 as hard segments and poly(tetramethylene glycol) (PTMG) as a soft segment. The molecular weight distribution, and mechanical property of the PEBA originated from the both oligomeric PAs were characterized.

• Elastomers and Composites
• /
• v.31 no.2
• /
• pp.104-110
• /
• 1996

The polyurethane was synthesized by the reaction of polycaprolactone diol(Mw 2000), 4,4'-diphenylmethane diisocyanate and 1,4-butanediol as the chain extender. Also, the modified polyurethane polymers based on liquid polybutadiene as a part of soft segment and dimethylolpropionic acid as a chain extender, giving polyurethane with various polarity, were synthesized. The thermal, mechanical, adhesion properties and water contact angles of the polyurethanes were examined. From the result of the water contact angle, the polarity of the acid modified PU containing 6% acid content was unchanged but mechanical and adhesion properties were improved. The water contact angles on polybutadiene modified PU films were increased with increasing polybutadiene content. The mechanical properties of the polybutadiene modified PU were higher than that of acid modified PU. However, the mechanical properties were reduced as polybutadiene content increased. The result is presumably due to phase separation between hard segment and soft segment. The peel strength of the polyurethane introduced with 5wt% polybutadiene was improved about 150% than that of unmodified PU. The same as the mechanical properties, the more polybutadiene was introduced, the lower peel strength was obtained.