• Journal of Environmental Science International
• /
• v.19 no.12
• /
• pp.1355-1359
• /
• 2010

The application of metal caps has been continuously increased as real life are extended. Metal caps is usually made of aluminum and polyethylene(PE) as packing. Since metal caps contain 75% aluminum on a weight basis, metal caps may be a valuable source when these were properly recovered. The recovery methods of metal caps have mechanical peeling and incineration. However these are either hard to apply in some case or environmentally unacceptable. So in this investigation, recovery method of aluminum from metal caps was investigated using pyrolysis. The result shows that pyrolysis temperature and pyrolysis time was $450^{\circ}C$ and 120min. respectively. Also 100% of aluminum was recovered from metal caps. Heat content of recovered oil was high enough to use as a fuel representing 7,425.0, 7,793.1, 7,583.2, 7,726.2(cal/g). Heavy metal contens in the oil were under regulatory limit indicating.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3274-3280
• /
• 2011

Monodispersed porous NiO and $Co_3O_4$ microcapsules with a hollow core were synthesized using SBA-16 silica sol and PS as a hard template. The porous hollow microcapsules were characterized by XRD, TEM and $N_2$ adsorption/desorption analysis. After $H_2$ reduction of metal oxide microspheres, they were conducted as an active catalyst in the reduction of chiral butylronitrile and cyanobenzene. The mesoporous metals having a hollow structure showed a higher activity than a nonporous metal powder and an impregnated metal on the carbon support.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.4
• /
• pp.338-346
• /
• 1981

Honing, lapping, polishing and superfinishing are applied for a precision machining to finish the metal surface, but these precision machining are micro-cutting by hard and micro-abrasive grains. Frictional machining is the new method to finish mirrorlike surface without using those abrasive grains. The frictional machining produces high pressure and high temperature instantly by compressing a tool material against the metal surface in sliding motion. The metal surface is given plastic deformation and plastic flow by the above mentioned frictional motion, but the surface roughness of the metal surface is influenced by physical and chemical reaction in surrounding atmosphere. Therefore, the atmosphere around the metal optimum atmosphere in the frictional machining. The part 1 of the study was performed in liquid atmospheres. Diesel oil, lubricant, grease, lard oil, bean oil and cutting fluid were used as such atmospheres. Medium carbon steel SM 50 C was used as a workpiece and ceramic tip was applied as a frictional tool. The result of the experiment showed characteristic machining conditions to generate the best surface roughness in each atmospheres.

• Journal of Welding and Joining
• /
• v.18 no.2
• /
• pp.184-184
• /
• 2000

In this study, the lap welding between austenitic stainless steel and carbon steel was carried out using arc spot welding process and weldability of welded specimens was estimated. From the tensile-shear strength test, micro Vickers hardness test, and microstructure observation, specimen of 6.5mm(hole of upper plate) showed the best results in terms of tensile-shear strength and nugget shape. And there was an unmixed zone in fusion boundary between the carbon steel base metal and bulk weld metal. This zone had very thin width with the hard microstructure. The shape of weld nugget in arc spot welding of dissimilar metal welds was predicted by searching thermal history of a weld joint through a three-dimensional finite element model. From the numerical analysis, predicted the shape of weld nugget showed good agreement with the experiment(Received August 24, 1999)

• Journal of Welding and Joining
• /
• v.18 no.2
• /
• pp.57-63
• /
• 2000

In this study, the lap welding between austenitic stainless steel and carbon steel was carried out using arc spot welding process and weldability of welded specimens was estimated. From the tensile-shear strength test, micro Vickers harness test, and microstructure observation, specimen of $psi6.5mm$(hole of upper plate) showed the best results in terms of tensile-shear strength and nugget shape. And there was an unmix zone in fusion boundary between the carbon steel base metal and bulk weld metal. This zone had very width with the hard microstructure. The shape of weld nugget in arc spot welding of dissimilar metal melds was predicted by searching thermal history of a weld joint through a three-dimensional finite element model. From the numerical analysis, predicted the shape of weld nugget showed good agreement with the experiment.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.93-97
• /
• 1991

Rate constants have been measured spectrophotometrically for the reactions of alkali metal ethoxides with 4-nitrophenyl benzoate, S-4-nitrophenyl thiobenzoate and 4-nitrophenyl thionbenzoate in ethanol at 25$^{\circ}$C. Substitution of S for O in the leaving group has not affected reactivity significantly, while the effect of the similar replacement in the acyl group has led to rate decrease by a factor of 10, although pronounced rate enhancements have been expected for both systems. The replacement of O by a polarizable S has also influenced the reactivity of the esters toward alkali metal ethoxides, i.e. the reactivity decreases as the size of the metal ion decreases. The alkali metal ions have showed inhibition effect instead of catalytic effect which would have been expected for the present system. The effect of replaced sulfur atom on the reactivity for the present system is attributed to the nature of hard and soft acids and bases.

• Journal of Science of Art and Design
• /
• v.6
• /
• pp.226-248
• /
• 2004

The researcher has tried to develop the aesthetic value of the art and the function of metalwork in conjunction with our daily life. especially has been eager to develop the new possibility of metal urns through the investigation of ordinary metalwork. Funeral urns are vessels to fill the ashes of bodies. As the social issues, including problems of restricted land territory and environmental pollution are awakening, many people are much concerned about the use of urns in recent days. Although social concerns about cremation and urns are getting high, most urns in Korea have been made of ceramic and stone. The shape of old urns are pot style with lids, and their color is simple white or jade green. Moreover, old urns are expensive, unpractical, simple, and furthermore, the feature of urns has not preserved the sense of beauty. In this context, we have narrow choices to select urns, and it has been difficult for us to be familiar with the old-style urns. Therefore, the need for developing metal urns are necessary as the increase of public concerns towards cremation is widely spreading. As it is well known, metal is not only regarded as hard, antibacterial, pro-environmental material , but also regarded as good substance for urns. Metal is also suitable for making urns because of metal's characteristics of easy processing, mass production, and cheap price. The researcher has been tried to find the possibility of art of metalwork through the dissemination of metal urns to the public. The researcher has also attempted to represent the characteristics and symbolic implications of contemporary metal urns for ordinary people to adopt metal urns as their 'Rite Haven'.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.7
• /
• pp.311-315
• /
• 2002

Chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric(IMD), inter-level dielectric (ILD) layers of multi-layer interconnections. In this paper, we studied the characteristics of polishing pad, which can apply shallow trench isolation (STI)-CMP process for global planarization of multi-level interconnection structure. Also, we investigated the effects of different sets of polishing pad, such as soft and hard pad. As an experimental result, hard pad showed center-fast type, and soft pad showed edge-fast type. Totally, the defect level has shown little difference, however, the counts of scratch was detected less than 2 on JR111 pad. Through the above results, we can select optimum polishing pad, so we can expect the improvements of throughput and device yield.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.293-294
• /
• 2006

Laser Powder Deposition (LPD) is a technology capable of modifying a metallic structure by adding the appropriate material to perform a desired function. LPD offers a unique fabrication technique that allows the use of soft (tough) materials as base structures. Through LPD a hard material can be applied to the base material with little thermal input (minimal dilution and heat-affected-zone {HAZ}), thus providing the function of a heat treatment or other surface modifications. These surface modifications have been evaluated through standard wear testing (ASTM G-65), surface hardness (Rc), micro-hardness (vickers), and optical microscopy.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.28-32
• /
• 2005

In this paper, we propose a novel test method to effectively detect hard and soft faults in CMOS 2-stage op-amps. The proposed method uses a very high frequency sinusoidal signal that exceeds unit gain bandwidth to maximize the fault effects. Since the proposed test method doesn't require any complex algorithms to generate the test pattern and uses only a single test pattern to detect all target faults, therefore test costs can be much reduced. The area overhead is also very small because the CUT is converted to a unit gain amplifier. Using HSPICE simulation, the results indicated a high degree of fault coverage for hard and soft faults in CMOS 2-stage op-amps. To verify this proposed method, we fabricated a CMOS op-amp that contained various short and open faults through the Hyundai 0.65-um 2-poly 2-metal CMOS process. Experimental results for the fabricated chip have shown that the proposed test method can effectively detect hard and soft faults in CMOS op-amps.