• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.131-141
• /
• 2004

This study deals with the procedure of safety improvement, productivity increase, and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind, the necessity, and the concept of preventive maintenance, and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss, comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• The Korean Journal of Health Service Management
• /
• v.13 no.1
• /
• pp.55-65
• /
• 2019

Objectives: The purpose of this study is to analyze basic data on socio - demographic characteristics, occupational careers, and desire for employment of job seekers in their Fifties and Sixties using a portal site. Methods: For this research, secondary data were collected by the researcher from 704 job seekers and were statistically analyzed using the SPSS package. Results: The results of the analysis are as follows: Most job seekers want a job that suits their competence and career trajectory, but the reality is that as their age increases, jobs suitable for those in their fifties and sixties are hard to find; thus these job seekers accept simple labor or functional jobs. Conclusions: Differences were found in work conditions such as occupation level, job position, total career years, desired employment type, and expected salary depending on socio - demographic variables. Consequently, improvements should be made for various job searching paths for older adults as well as increasing the accessibility of job searching information.

• The Journal of Korea Robotics Society
• /
• v.16 no.1
• /
• pp.49-55
• /
• 2021

Recently, a smart farm technology is drawing attention as an alternative to the decline of farm labor population problems due to the aging society. Especially, there is an increasing demand for automatic harvesting system that can be commercialized in the market. Pre-harvest crop detection is the most important issue for the harvesting robot system in a real-world environment. In this paper, we proposed a real-time tomato instance tracking algorithm by using deep learning and probability models. In general, It is hard to keep track of the same tomato instance between successive frames, because the tomato growing environment is disturbed by the change of lighting condition and a background clutter without a stochastic approach. Therefore, this work suggests that individual tomato object detection for each frame is conducted by YOLOv3 model, and the continuous instance tracking between frames is performed by Kalman filter and probability model. We have verified the performance of the proposed method, an experiment was shown a good result in real-world test data.

• Korean Journal of Agricultural Science
• /
• v.48 no.2
• /
• pp.311-331
• /
• 2021

Climate change with extreme hydrological events has become a significant concern for agricultural water systems. Climate change affects not only irrigation availability but also agricultural water requirement. In response, adaptation strategies with soft and hard options have been considered to mitigate the impacts from climate change. However, their implementation has become progressively challenging and complex due to the interconnected impacts of climate change with socio-economic change in agricultural circumstances, and this can generate more uncertainty and complexity in the adaptive management of the agricultural water systems. This study was carried out for the agricultural water supply system in Seongju dam watershed in Seonju-gun, Gyeongbuk in South Korea. The first step is to identify system disturbances. Climate variation and socio-economic components with historical and forecast data were investigated Then, as the second step, problematic trends of the critical performance were identified for the historical and future climate scenarios. As the third step, a system structure was built with a dynamic hypothesis (causal loop diagram) to understand Seongju water system features and interactions with multiple feedbacks across system components in water, agriculture, and socio-economic sectors related to the case study water system. Then, as the fourth step, a mathematical SD (system dynamics) model was developed based on the dynamic hypothesis, including sub-models related to dam reservoir, irrigation channel, irrigation demand, farming income, and labor force, and the fidelity of the SD model to the Seongju water system was checked.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1254-1254
• /
• 2022

The Multi-family Residential is one of the most famous building types for a rental property in the US. Often times it includes multiple residential buildings and some amenity facilities, including a clubhouse or leasing office, swimming pool, dog park, and garages. Since the building type is built for rental purposes, the construction planning is phased and it makes the project complicated. Detailed planning and execution are important for successful construction management. This paper provides some management practices that are applied to one of the multi-family residential construction projects in Phoenix, AZ. The Front End Planning (FEP) process performed by both owner and contractor is the first key to a successful construction project. Specifically, the early review of phased turnover strategy, grading, fire/Americans with Disabilities Act (ADA) compliance, and Mechanical/ Electricity/Plumbing/Technology (MEPT) will provide absolute benefit to the project. Second, using a scheduling method to control short-term schedules and long-term can provide the ability to manage the issues with agility. Third, material delivery and procurement dominate the both project schedule and cost. With this COVID-19 circumstance, it is hard to expect the material, equipment, and labor forces to be delivered on time with the contracted price. Managing floats are more than important to managing construction productivity. Risk management should work to share the risks fairly. Lastly, turnover is directly linked with the profit of the project for both owner and contractor. The communication between the owner and contractor to re-schedule the proper turnover schedule is important for the phased construction project.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.722-728
• /
• 2000

This study of field control machine in the recycled vinyl rail is gantry crane type and promoting agricultural automatization through self-controlled spraying, harvesting and conveyance. In addition to, that control machine could get a cost and labor reduction effect through automatization and make better environment by preventing farmers from agrichemical damage, accidents and recycling wasted vinyl. That machine is able to be divided as traveling, spraying, harvesting and conveyance sections. In driving section consists of girder frame, carrier, rail, control system, driving system, working machine, rail and loading device for working machine. This machine has following advantages to be able to bring a big innovation in the agricultural industry. I) Accurate performance is able to be done by proper positioning due to based on the rails. 2) The soil is not made hard like heavy tractor 3) The wheel is not sank into the soil and slipped well under rain like heavy tractor. Therefore, weather and soil situation could not affect working condition. 4) Complete unmanned control and 24hours-working are available due to traveling on the rails. 5) It could use various energy resources like not only liquid fuel but also solar, common electronic power due to traveling on the rails.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.742-743
• /
• 2015

Korean construction industry has developed with national economy growth for a couple of decades. However, because of slump of real estate, the domestic construction industry was intimidated. In this situation, many construction company has no choice but to go abroad to find construction projects. However, almost small or medium-sized construction companies are very hard to operate their business because they have small funding ability and weak labor power. Therefore, this study aims to propose an assessment tool through analyzing risk factors of overseas construction projects for small or medium-sized companies by examining preceding research and interviewing industry experts. Weights of the risk factors are determined through the surveys of the industry practitioners. All of the data is configured into the assessment tool and this converts the quantitative information which leads to the optimal of strategies choice. This paper provides a quantitative measurement of possible performance and detailed assessment of each itemized risk factors. This assessment tool is qualified for industry experts so that it can safely be applied to the future projects. Ultimately, many small or medium sized construction companies will benefit from the tool proposed in this study to examine the potential of the overseas market expansion.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.58-65
• /
• 2011

Construction Productivity is one of the most important elements in construction management. It is used in construction process scheduling and cost management, which are significant sector in construction management. It is important to make appropriate schedule and monitor how works are done within schedule. But construction project contains uncertainty and inexactitude, modifying construction schedule is being an issue to manage construction works well. Even though prediction and monitoring of productivity can be principal activity, it is hard to predict productivity with manager's experience and a standard of estimate. A large number of factors influencing productivity, such as drawing, construction method, weather, labor, material, equipment, etc. But current calculation of productivity depends on empirical probability, not consider difference of each influencing factor. In this research, the aim is to present a productivity predicting regression model of form work, which includes effectiveness of influences factors. 5 variables existed inside form work are selected by interview and site research based on literature review of existed various productivity influencing factors. The effectiveness and correlation of productivity influencing factors are analyzed by statistical approach, and it is used to make productivity regression model. The finding of this research will improves monitoring and controlling of project schedule in construction phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.451-458
• /
• 2018

This study was conducted to determine the association between quality of sleep (QOL) and the general characteristics, the health-behavioral factors, and the occupational characteristics of firefighting officers. The survey was conducted in October 2016 with a self-administered questionnaire using the Pittsburgh Sleep Quality Index (PSQI) developed by Pittsburgh University, targeting 600 male firefighting officers working at five fire stations in D city. As a result, the QOL of the study subjects measured by the PSQI revealed 13.2% to be good, and 86.8% to be poor. In relation to general characteristics and health habits, the rate of the group who had poor quality sleep was significantly higher in those with a lower subjective health status, in the non-smoking group, and in the low sleep-quality group, compared to the good sleep-quality group. For occupational characteristics, the rate of those with poor quality sleep was significantly higher in groups such as the fire suppression group, the shift work group, the hard physical labor group, the group with a lower sense of satisfaction in their work, and in the group classed as unfit for the job but who were not considering quitting their jobs, compared to their respective counterparts. Multiple regression analysis revealed factors of influence with explanatory powers of 24.4% for subjective health status, alcohol use, subjective quality of sleep, career, job position, and physical labor. The results of this study suggest that the quality of sleep for firefighting officers is significantly related to general characteristics, health-behavioral characteristics, and occupational characteristics.

• (The) Research of the performance art and culture
• /
• no.32
• /
• pp.371-397
• /
• 2016

The function of the Duhak nongak(農樂) in Jecheon consist of Ceremony, Labor, and Entertainment. Before the commemorative rites for village god village people beat a small gong. This is a evidence of the drive away evil spirits in New Year's Eve of the lunar year. Before harden house site village peoples beat musical instrument noisily. In order to press hard the god of the earth they play musical instrument. Musical instrument not a simple musical instrument, but a purify and wish tool. When weeding a rice paddy Durae organized in Sangpung village. Durae are less effective than communal sharing of labor in weeding effect. Nonetheless, Nongak carried out core function in Durae. In order to participate Nonngak concours, peoples made a Pangut. From independence to 1970s people combine traditional nongak and Pangut. Since then village people played Pangut. From 1990s Pangut was played by Duhak Nonngak Preservation Association. Through the participation Nonngak concours, Duhak nongak was regrouped. Finally this nongak prepared Taeguk-jin, Snail-jin, Cross-jin, Sabang-jin, Sanggyeonrae Bans anggyeonrae-jin, Palbang-jin, Rope making and individual play. Duhak Nonngak promptly met the needs of the times. So, they could play Pangut. The feature of the Duhak Nonngak is that active cognition, highly skilled musician a patron and scouting a competent leader.