• Proceedings of the KWS Conference
• /
• 1994.05a
• /
• pp.65-68
• /
• 1994

• Journal of Periodontal and Implant Science
• /
• v.9 no.1
• /
• pp.28.2-28.2
• /
• 1979

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.44.2-44
• /
• 2002

• Journal of the Korean institute of surface engineering
• /
• v.24 no.4
• /
• pp.179-186
• /
• 1991

The effects of silicone contents and flow rates(agitation rates) of electrolyte on the formation and mechanical properties of hard anodized film of Al-Si alloy have been studied in 12% H2SO4 + 1% Oxalic acid with varying the silicone contents in the rance of 0 to 11.6% and the flow rates of electrolyte in the range of 0 to 90cm/sec. The film forming voltage required to maintain an equivalent current density significantly increase with the silicone content of Al-Si alloys due to a low conductivity of silicone. Hardness and wear resistance of the anodized film of Al-Si alloys decreases wit increasing the silicone content. The increase in the flow rate of electrolyte has a similar influence on the formation and mechanical properties of anodized film as does the decrease in bath temperature. Hardness of anodized film is rapidly increased with the flow rate being increased from 10cm/sec. It is observed that the increase in the flow rate from 11cm/sec. It is observed that the increase in the flow from 11cm/sec to 48cm/sec is more effective in enhancing the hardness of film than is the decrease in bath temperature from 1$0^{\circ}C$ to $0^{\circ}C$.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.25 no.2
• /
• pp.66-77
• /
• 2012

Objectives: This study was designed to investigate the effects of PR on ovarian tissue in PCOS rats through measurement of morphological and histo-pathological observations, ovarian size. In addition, effects on expression levels of Insulin like Growth Factor Receptor(IGFR) were also investigated to elucidate related mechanisms. Methods: PCOS was induced by single intermuscular injection with ${\beta}$-Estradiol 17-Valerate(EV) in female rats. Normal group(NOR, n=8) were injected with sesame oil and administrated hard food for five weeks. Control group(CTL, n=8) were injected with EV and administrated hard food for five weeks. CR group(n=8) were injected with EV and administrated hard food mixed CR for five weeks. Then, we measured weights of body and ovary, uptakes of food and water. And we observed morphological and histo-pathological changes of ovary, levels of IGFR. Results: In this experiments, single injection of Estradiol Valerate(EV) induced suppression of weight gain, formation of cysts, increase of IGFR expression. Oral administration of PR prevent decrease of ovarian size significantly. Further more, formation of cystic follicles induced by EV injection is suppressed by PR treatment. Conclusions: These results suggest PR can be used for patients with PCOS to prevent formation of cystic follicles and malfunction of ovary.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.47-54
• /
• 2008

Hard turning process can be defined as a single-point machining process carried out on "hard" materials. The process is intended to replace or limit traditional grinding operations that are expensive, environmentally unfriendly, and inflexible. The purpose of this study is to achieve a systematic understanding of machining characteristics and the effects of machining parameters on cutting force, tool wear shape and chip formation by the outer cutting of a kind of wear resistant tungsten carbide V30. Hard turning experiments were carried out on this alloy using the PCD (Poly Crystalline Diamond), cBN (cubic Boron Nitride) and PcBN (Polycrystalline cubic Boron Nitride) cutting tools. The PcBN and the usual cBN tools were used to be compare with the PCD tool and the dry turning was carried out. The PcBN is attractive as the tool material which replaces the PCD. The tool wear width and cutting force were measured, and the worn tool and chip were observed. The difference of the tool wear mechanism among the three tool materials was investigated.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.700-704
• /
• 1997

Fermentation and morphological characteristics of rice bread baked with gums, lipids, and glutens added dough were investigated to establish the standard recipe for rice bread processing. All gum-type additives 1ed to successful formation of rice bread. Hydroxypropyl-methyl-cellulose among tested gums showed the best volume expansion and successful formation of rice bread. Addition of vegetable oils gave better effect on increasing the specific loaf volume and tenderness of rice bread than addition of the solid-type lipids such as margarin and lard during rice bread processing. Dry heating during baking of the rice bread gave more desirable effect on specific gravity of rice bread than wet heating. High-amylose rices such as Suweonjo, AC 27, and IR 44 showed better formation of rice bread in the case of adding 3% hydroxypropyl-methyl-cellulose, while Suweon 230 and Pusa-33-30 showed slightly better formation of rice bread in the case of adding the gluten and strong hard flour. The glutinous rice Hangangchalbyeo failed to the formation of rice bread in both cases of adding 3% hydroxypropyl-methyl-cellulose and the gluten and hard flour.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.3
• /
• pp.259-266
• /
• 2004

Film properties of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. Tensile strength and tensile elongation at break of final films were evaluated. Those properties can be interpreted in terms of PBA/PMMA phase ratio and their morphology. The interfacial adhesion strength was also evaluated using $180^{\circ}$ peel strength measurement and cross hatch cutting test.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.566.1-566
• /
• 2001

The most desirable healing process for endodontic therapy is apical closure by hard tissue such as dentine or cementum. Then, we estimated hard tissue conductivity of tetracalcium phosphate (4CP)/dicalcium phosphate (2CP) compound using mandibular first molars of SD rats. Residual pulp responses to the calcium phosphate compound were examined at several amputation levels of pulp. 2CP was purchased and passed through a $32-\mu\textrm{m}$ sieve. 4CP was obtained from a stoichiometric mixture of 2CP and calcium carbonate (Mol ratio: Ca/P=2.0) by the dry synthetic method at 1, 400(C for 8 hours.(omitted)

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.55-60
• /
• 2020

The hard mask photo-resist strip inspection system for the semiconductor wafer manufacturing process inspects the position of the circuit pattern formed on the wafer by measuring the distance from the edge of the wafer to the strip processing area. After that, it is an inspection system that enables you to check the process status in real time. Process defects can be significantly reduced by applying a tester that has not been applied to the existing wafer strip process, edge etching process, and wafer ashing process. In addition, it is a technology for localizing semiconductor process inspection equipment that can analyze the outer diameter of the wafer and the state of pattern formation, which can secure process stability and improve wafer edge yield.