• Journal of Radiation Industry
• /
• v.4 no.1
• /
• pp.13-17
• /
• 2010

The radioisotope labelling study was carried out for the sediment transport investigation. The fate of suspended solid materials is deeply related to the harbour siltation and the shoreline deformation that take place as a result of the artificial development of coastal area. In the experiment, $^{99m}TcO_4{^-}$ was chemically reduced and labelled in such a way that the labelled particles have the similar settling characteristics with the natural sediment. The radioisotope labelling techniques can be widely used for the natural resource exploration where the hydraulic dynamics of underground water and surface water are of importance.

• Animal Bioscience
• /
• v.35 no.2_spc
• /
• pp.356-363
• /
• 2022

This paper is a review of some experiments using black soldier fly (BSF) and its by-product to explore their nutritional value, production potential in Indonesia and its application in the ration of ruminants. Evaluation on the effect of milk replacer, creep feed containing BSF, BSF frass and the possibility to use lactic acid bacteria from BSF as probiotics are presented. Utilization of BSF larvae in milk replacer as skim and cream milk substitute showed that there were similarity on physiological, hematological status and performance of goat kids compared to those offered goat milk or commercial milk replacer. In addition, BSF larvae can be used to substitute soybean meal in the creep feed for post weaning goat kids without any differences in weight gain and blood profiles. However, utilization of BSF frass in the fattening goat ration resulted lower digestibility of dry matter and organic matter due to the chitin content in the frass. Black soldier fly larvae grown on chicken manure harbour lactic acid bacteria (LAB) which have potential as probiotics for ruminants. In general, BSF larvae has potential as ingredient for milk replacer, creep feed, fattening ration, and source of LAB for probiotics.

• Geomechanics and Engineering
• /
• v.29 no.1
• /
• pp.13-23
• /
• 2022

Peat soil has the characteristics of high moisture content, large void ratio and low shear strength. In this study, unconfined compressive strength and SEM tests are conducted to investigate the effects of ultrahigh moisture content, cement content, organic content and pH value on the strength of solidified peat. As an increase in the cement content and curing period, the failure mode of solidified peat soil changes from ductile failure to brittle failure. The influence of moisture content on the strength of solidified peat is greater than the cement content. As cement content increases from 10% to 30%, strength of solidified peat at a curing age of 28 days increases by 161%~485%. By increasing water content by 100%, decreases of solidified peat at a curing age of 28 days is 42%~79%. Compared with the strength of solidified peat with a pH value of 5.5, the strength of peat with a pH value of 3.5 reduces by 10% ~ 46%, while the strength of peat with a pH value of 7.0 increases by 8% ~ 38%. It is recommended to use filler materials for stabilizing peat soil with moisture content greater than 200%. Because of small size of clay particles, clay added in the cement solidified peat can improve much higher strength that that of sand.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.83-83
• /
• 2022

여러 분야의 연구자들이 지진해일의 위험에 대한 경각심을 가지고, 지진해일의 발생, 전파 그리고 수리현상을 해석하기 위해 많은 노력을 기울이고 있다. 해안지역에서 직접적인 피해를 입히는 지진해일의 충격파, 처오름, 월파, 침수 등에 관한 연구에 유사한 파형 특성을 가진 고립파를 많이 사용한다. 고립파는 비선형성과 분산이 균형을 이루는 가정에서 Korteweg-de Vries(KdV) 방정식을 만족하는 안정적인 이론파이다. 고립파의 파형분포는 수심에 의해 결정되고, 일정 수심 이상에서는 지진해일을 대신해 사용할 수 있다. 그러나 수심이 낮은 천해에서는 주기와 파장이 비현실적으로 짧아짐으로 지진해일을 대신하기에는 무리가 있다. 본 연구에서는 지진해일의 처오름 특성을 분석하기 위한 1:20 불투과성 경사면이 포함된 수치파동수조를 구성한다. 먼저, 일본 NOWPHAS(Nationwide Ocean Wave information network for Ports and HArbourS)의 관측자료를 이용하여 2011 동일본 지진해일과 고립파의 파형분포를 비교한다. 그리고 다양한 파형의 지진해일 생성할 수 있게 개발된 조파방법을 수치파동수조에 도입하여 수치해석을 수행한다. 수치해석결과, 지진해일의 처오름 높이가 고립파에 비해 최대 1.8배, 최소 1.13배, 평균 1.56배 증가한다.

• Geomechanics and Engineering
• /
• v.32 no.2
• /
• pp.179-191
• /
• 2023

To study the influences of tunneling on the earth pressure and ground settlement when the tunnel passes through the adjacent underground retaining structure, 30 two-dimensional model tests were carried out taking into account the ratios of tunnel excavation depth (H) to lateral width (w), excavation width (B), and excavation distance using a custom-made test device and an analogical soil. Tunnel crossing adjacent existing retaining structure (TCE) and tunnel crossing adjacent newly-built retaining structure (TCN) were simulated and the earth pressure variations and ground settlement distribution during excavation were analyzed. For TCE condition, the earth pressure increments, maximum ground settlement and the curvature of the ground settlement curve are negatively related to H/B, but positively related to H/s and H/w. For TCN condition, most trends are consistent with TCE except that the earth pressure increments and the curvature of ground settlement curve are negatively related to H/w. The maximum ground settlement is larger than that observed in tunnel crossing the existing underground structure. This study provides an assessment basis for the design and construction under confined space conditions.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.513-520
• /
• 2022

During the long-time service of a bolt, its preload may suffer slight perturbations or significant reductions. It is a dilemma to monitor preload changes at high resolution and full scale. Approaches for bolt preload monitoring with multi-resolution should be developed. In this paper, a simple and effective multi-resolution bolt preload monitoring approach using ultrasonic guided waves (UGW) is proposed. A linear relationship between the time-of-flight (TOF) variation of multi-reflected waves and preload is derived to theoretically reveal the multi-resolution properties of UGW. The variations of TOF before and after the slight preload perturbations are extracted by using a global evaluation method. Experimental results show that the signal-to-noise ratio (SNR) of the 1^st, 2^nd, and 3^rd-reflected UGWs is larger than 20 dB. The resolution of the 2^nd-reflected UGW is higher than that of the 1^st-reflected UGW and lower than that of the 3^rd-reflected UGW. The ultimate detectable resolutions of bolt preload (DRBP) of the 1^st and 3^th-reflected UGWs are 0.9% and 0.5%, respectively. By using the 1^st and 3^th-reflected guided waves, the bolt looseness with different degrees can be monitored simultaneously.

• Journal of Fisheries and Marine Sciences Education
• /
• v.14 no.2
• /
• pp.149-160
• /
• 2002

I have been analyzed the marine accidents during 10years(1992~2001) based on the maritime inquire court decision, the results were as follows: 1. The rate of accident occuring were showed fishing boat(69.9%), freighter(12.3%), tanker(4.3%), tug boat(3.8%), passenger boat(2.1%) by the usage. 2. The marine accident had been showed operational fault(67.3%), mishandling of engine equipment(21.7%), meteorological condition, etc(11%) by the reason, most accidents had been occured by the operator fault and rack of experience. 3. The marine accidents had been showed damage of hull and engine(27.5%), collision(24%), foundering(11.3%), fire(3.9%), agrounding(10%), by the kind of accidents. 4. The accidents had been occured (74.6%) at the coastal sea, harbour and (25.4%) at the open sea by the sectors. The accidents of the vessel less than 500ton were much increased (54.3%) also, The accidents were much occured at the time between 0400~0800 hours by the time.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.153-158
• /
• 2004

The numerous investments have been introduced to design and assess mixing zone characteristics of wastewater discharges to the ocean. Specially It strive to meet water quality standard for persistent and bio-accumulative chemical contaminants at the point of discharge through continual improvement pollution prevention measures and other voluntary measures in the developed country. The goals that of this paper are to emphasize the regulatory mixing zone is defined as an allocated impact zone where the numeric water quality criteria may be exceeded as long as acutely toxic conditions are prevent. Furthermore, mixing zones be limited to an area or volume as small as practicable that with not interfere with the designated uses or the established community of aquatic life in the segment for which the uses are designated and the shape be a simple configuration that is easy to locate in the body of water and avoids impingement on biologically important areas and the shore hugging plumes should be avoided This results should be used with caution in evaluation the mixing zone characteristics of a discharge and only in conjunction with information from the effective marine outfall design as well as for the sound harbour design. Thus the numerical investigation using CORMIX has been performed to show the regulatory mixing zone in the near and far field of the marine outfall.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.389-398
• /
• 2017

The re-analysis on the stable weight of the concrete armor unit (CAU) at the roundhead and the suggestion of the covering range at the roundhead with the increased weight of CAU were conducted. Tetrapods were applied to the tests and the three dimensional hydraulic tests were performed. The test results for the stable weight at the roundhead area were similar to the guides from Korean Design Standard for Harbour and Fishery Port (MOF, 2014) and Coastal Engineering Manual (USACE, 2005). The investigation of covering range at the roundhead of rubble mound structures armoured with Tetrapods was suggested that the length of five times of the design wave height from the tip of the superstructure was needed and appropriate. Both sides of the superstructure should be covered with increasing weighted CAU to satisfy the stability at roundhead area.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.473-480
• /
• 2018

The effect of three iron-based adsorbents pre-depositing on ultrafiltration membrane for humic acid (HA) removal and membrane fouling was investigated. The result showed that pre-depositing adsorbents on membrane could not only reduce membrane fouling but also enhance HA removal. The flux was related to the adsorbent dosage and the optimal dosage for pre-deposition was $35.0g/m^2$. The dissolved organic carbon (DOC) removal of HA was 38.3%, 67.3% and 41.1% respectively when pre-deposited $35.0g/m^2$ $FeO_xH_y$, $MnFe_2O_4$ and $Fe_3O_4$ on membrane. Different adsorption effect of adsorbents on HA contributed to increasing of the flux at different level. Zeta potential of three adsorbents all decreased after adsorbed HA. The adsorption capacity of the three adsorbents was $FeO_xH_y$ > $MnFe_2O_4$ > $Fe_3O_4$. Atomic Force Microscopy (AFM) measurement showed the thickness of pre-deposition layers formed by different adsorbents was different. The scanning electron microscope (SEM) detection showed the morphology and compactness of pre-deposition layers formed by different adsorbents was different.