록볼트는 지하공동 굴착시 암반의 과도한 이완을 초기에 방지할 수 있는 가장 중요한 터널 지보재 중 하나이다. 국내외에서 록볼트의 설치에 따른 침하저감 및 보강효과, 다양한 록볼트 형태에 따른 터널 안정성 증대효과 등 록볼트 지보효과에 대한 많은 연구는 있으나, 록볼트에 긴장력을 가함으로써 절리암반의 지반보강 효과에 대한 연구는 미흡한 실정이다. 본 연구에서는 수평절리암반을 모사한 모형지반에서 록볼트의 긴장력 및 설치간격을 변수로 하여 대형모형실험을 실시하여, 록볼트에 의한 지반 보강효과를 확인하였다. 록볼트의 긴장력에 의한 절리암반 보강효과를 확인하기 위하여 단순보를 조성하여 긴장력과 설치간격을 변수로 하였다. 굴착에 따른 모형지반 중앙하부 처짐량을 측정하여 록볼트로 보강된 보강영역의 지반변형계수를 도출하였다.
This study was carried out to investigate the characteristics of the lining papers which had been separated from six pieces of paintings and calligraphic works of the 18th and the 20th century. A total 20 kinds of lining papers were examined on the physical properties, colors, fiber morphology, and color reactions. The grammage and thickness of lining papers which had been used hanging-scroll type works were higher than those of folder types. On the other hand, the grammage and thickness of the first layer lining papers which had been separated from silk ground works were lower than those of paper ground works. All kinds of lining papers were colored from yellow to yellowish red because of unbleaching and deterioration. Through the examination on fiber morphology and color reactions, lining papers were verified that all of those were made from paper mulberry bast fiber but the first layer of the Mukjukdo. The lining paper which of the first layer of the Mukjukdo was verified that it was made from mixture of paper mulberry, hemp, and spruce pulps.
최근 고령화 사회에 진입과 소득수준이 향상됨에 따라 의료 수요가 빠르게 증가되고 있다. 이중 신약 개발은 의료분야의 핵심 분야 중 하나로 전 세계적으로 많은 투자가 연구가 이루어지고 있다. 신약 개발의 중요한 과제 중 하나는 다양한 후보를 빠르고 정확하게 발굴하는 자동화 시스템을 개발하는 것이다. 고속으로 후보물질을 발굴하는 기술 중 대표적 기술이 세포 기반 고집적 스크리닝 시스템(High Contents Screening, 이하 HCS) 기술이다. 이 HCS 시스템에서 다양한 물질을 한꺼번에 스크리닝하기 위해서는 다기능 고정밀 디스팬서 제작이 필수적이다. 본 연구에서는 기존의 HCS 디스팬서 시스템이 가지고 있는 단점을 보완하기 위해 에어건과 압력 구동식 펌프를 이용한 새로운 컨셉의 비접촉식 디스팬서를 개발하고 그 가능성을 확인한다.
In order to illustrate the role of conidia of Mycosphaerella nawae as a secondary inoculum in nature, pseudothecial development on persimmon leaves was investigated microscopically. The fungal ascospores have been believed as the primary or only inoculum source in nature, however, pseudothecia were readily formed on persimmon leaves infected naturally and artificially by conidia. The pseudothecia of M. nawae were found to form in the tissues of infected leaves while the leaves were still hanging on the trees. The size of pseudothecia were approximately 51.0~122.4$\times$51.0~112.2 ${\mu}{\textrm}{m}$ (82.8 $\times$72.5 ${\mu}{\textrm}{m}$in average), the shapes were spherical, ovoid or occidental pear type. The sizes of asci were approximately 30.6~61.2$\times$8.2~10.2 ${\mu}{\textrm}{m}$(46.6$\times$9.4 ${\mu}{\textrm}{m}$ in average) and the shapes were cylinder or banana. The ascospores were mostly spindle type, and the sizes were 10.2~12.2$\times$3.1~4.1 ${\mu}{\textrm}{m}$ (11.4$\times$3.2 ${\mu}{\textrm}{m}$ in average)-like. The pseudothecial formation was initiated before defoliation and morphological characteristics of the pseudothecia, ascus and ascospores on the infected leaves were fully illustrated in this study. Results indicated that conidia of M. nawae induce circular leaf spot of persimmon as much as ascospores, and might play an important role of the disease epidemics in nature.
Backgrouds: Cervical epidural blocks were used as part of a comprehensive multimodal treatment program for patients with chronic pain in the head, neck and upper extremities. The depth of the epidural space beneth the skin surface varies at different levels of the spinal column in the same patient. It also varies from patient to patient at the same vertebral level. We studied the distance the skin to the cervical epidural space in adults patients at different intervertebral spaces. Methods: Date were gathered from 628 patients having cervical epidural block for relief of cervical and upper extrimity pain. All blocks were performed using hanging drop method after loss of resistance with saline at C5-6, C6-7, C7-T1 intervertebral space. Results: Mean distances for skin to cervical epidural space (DSES) were 5.42 cm, 5.06 cm, 4.68 cm in male, 5.00 cm, 4.61 cm, 4.10 cm in female at C7-T1, C6-7, C5-6 intervertebral space. DSES correlated with body weight, neck circumference and body mass index significantly. Conclusion: In the cervical spine, DSES varies from space to space. The longest DSES were noted at C7-T1 level in male, and the shortest DSES were at C5-6 in female. DSES has significant relationships with weight, neck circumference and body mass index.
This study aims to investigate effects of the length of the buoy and sand bag line on the loss of webfoot octopus pot. A numerical modeling and simulation was carried out to analyze the process that the pot gear affected by wave using the mass spring model. Through the simulation, tensions of sand bag line under various condition were investigated by length of buoy and sand bag line. The drag force and coefficient k of an artificial shell used in the webfoot octopus pot was obtained from an experiment in a circular water channel, and the coefficient k was applied to the simulation. To verify the accuracy of the simulation model, a simple test was conducted into measuring a rope tension of a hanging shell under flow. Then, the test result was compared with the simulation. The lengths of the buoy line in the simulation were 1.12, 1.41, 1.80, 2.23, 2.69, and 3.17 times of water depth. The lengths of sand bag line were 10, 20, 30, and 40 meters, and conditions of water depth were 8, 15, 22 meters. 4 meter height and 8 second period of wave were applied to all simulations. As a results, the tension of the sand bag line was decreased as the buoy and sand bag line were increased. The minimum tension of the sand bag line was appeared in conditions that the length of the buoy line is twice of water depth and the sand bag line length is over 40 meters (except in case of depth 8 meters.).
The October 23 2011 Van Earthquake is studied from an earthquake engineering point of view. Strong ground motion processing was performed to investigate features of the earthquake source, forward directivity effects during the rupture process as well as local site effects. Strong motion characteristics were investigated in terms of peak ground motion and spectral acceleration values. Directiviy effects were discussed in detail via elastic response spectra and wide band spectograms to see the high frequency energy distributions. Source parameters and slip distribution results of the earthquake which had been proposed by different researchers were summarized. Influence of the source parameters on structural response were shown by comparing elastic response spectra of Muradiye synthetic records which were performed by broadband strong motion simulations of the earthquake. It has been emphasized that characteristics of the earthquake rupture dynamics and their effects on structural design might be investigated from a multidisciplinary point of view. Seismotectonic calculations (e.g., slip pattern, rupture velocity) may be extended relating different engineering parameters (e.g., interstorey drifts, spectral accelerations) across different disciplines while using code based seismic design approaches. Current state of the art building codes still far from fully reflecting earthquake source related parameters into design rules. Some of those deficiencies and recent efforts to overcome these problems were also mentioned. Next generation ground motion prediction equations (GMPEs) may be incorporated with certain site categories for site effects. Likewise in the 2011 Van Earthquake, Reverse/Oblique earthquakes indicate that GMPEs need to be feasible to a wider range of magnitudes and distances in engineering practice. Due to the reverse faulting with large slip and dip angles, vertical displacements along with directivity and fault normal effects might significantly affect the engineering structures. Main reason of excessive damage in the town of Erciş can be attributed to these factors. Such effects should be considered in advance through the establishment of vertical design spectra and effects might be incorporated in the available GMPEs.
1.000%(w/v)텅스텐 메트릭스 중에 미량불순물로 존재하는 아연, 카드뮴, 납 및 구리의 동시정량을 펄스차이 벗김전압전류법으로 검토하였다. 지지전해질로는 타르타르산(pH=5.00)을 사용하였다. 사전 농축은 -1.2 volt(vs. Ag/AgCl)에서 3분간이면 충분하였다. 1.000%(w/v)텅스텐 매트릭스 중에서 아연, 카드뮴, 납 및 구리 각 원소의 동시 정량이 가능한 직선 범위는 10 ~ 50 ppb였으며, 3${\sigma}$검출한계는 각각 1.25, 1.02, 1.69, 1.02ppb 로 나타났다. 이 결과는 텅스텐 매트릭스하에서 ICP-AES의 검출한계인 8.0, 5.0, 120, 5 ppb 결과와 비교하여 볼때, 본 방법이 보다 우수한 미량분석방법임을 알 수 있다.
The growing behavior of Candida albicans in various concentration of glucose and corticosteroid media was studied with the method of modified hanging slide culture. The strains of Candida albicans used in this study were obtained from vaginal swab from outpatients and were isolated from cultured colonies on Sabouraud's glucose agar media. To detect the budding rate of blastospore, the diluted suspension of Candida albicans in normal saline were inoculated into various concentration of glucose (Gl, G2, G3, G4), corticosteroid (S1, S2, S3, S4) and corticosteroid with 10% pepton broth (D1, D2, D3, D4) respectively and cultured at room temperature $(22{\sim}25^{\circ}C)$. The number of budding of blastospore were counted under the high power field of light microscope (400X) at specific time interval, e.g, 1, 2, 3, 6, 9, 12, 18, and 24 hours after inoculation. The results are as following: 1. The most effective budding rate was seen in G4 media (1.25% glucose) in 18 hours aft inoculation (89%). 2. The budding rate in Sabouraud's glucose broth with various concentration of dexamethasone added, was not significantly different from that of simple Sabouraud's glucose broth within 18 hours after inoculation, but there was statistically. significant difference in two budding rate at 24 hours observation. 3. The budding rate in 10% pepton broth media with various concentration of dexamethasone was almost same budding rate in control group, which is normal saline and 10% pepton broth, except on 2 and 24 hours results.
Negative stiffness, previously emulated by active or semi-active control for cable vibration mitigation, is realized passively using a self-contained highly compressed spring, the negative stiffness device (NSD).The NSD installed in parallel with a viscous damper (VD) in the vicinity of cable anchorage, enables increment of damper deformation during cable vibrations and hence increases the attainable cable damping. Considering the small cable displacement at the damper location, even with the weakening device, the force provided by the NSD-VD assembly is approximately linear. Complex frequency analysis has thus been conducted to evaluate the damping effect of the assembly on the cable; the displacement-dependent negative stiffness is further accounted by numerical analysis, validating the accuracy of the linear approximation for practical ranges of cable and NSD configurations. The NSD is confirmed to be a practical and cost-effective solution to improve the modal damping of a cable provided by an external damper, especially for super-long cables where the damper location is particularly limited. Moreover, mathematically, a linear negative stiffness and viscous damping assembly has proven capability to represent active or semi-active control for simplified cable vibration analysis as reported in the literature, while in these studies only the assembly located near cable anchorage has been addressed. It is of considerable interest to understand the general characteristics of a cable with the assembly relieving the location restriction, since it is quite practical to have an active controller installed at arbitrary location along the cable span such as by hanging an active tuned mass damper. In this paper the cable frequency variations and damping evolutions with respect to the arbitrary assembly location are then evaluated and compared to those of a taut cable with a viscous damper at arbitrary location, and novel frequency shifts are observed. The characterized complex frequencies presented in this paper can be used for preliminary damping effect evaluation of an adaptive passive or semi-active or active device for cable vibration control.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.