• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.378-387
• /
• 2017

The combined model following control (MFC)-decoupler system is employed for a full authority fly-by-wire utility helicopter to enhance handling qualities. The MFC, which governs the vehicle to follow the prescribed model, is widely employed for modern helicopters. However, it may not be sufficient as helicopters often suffer significant cross coupling. The coupled responses between control axes of a helicopter increase the pilot's work load and may degrade handling qualities. As the decoupler is introduced to the MFC, the combined MFC-decoupler effectively solves the coupling problems and enhances handling qualities. The proposed system is verified via the handling qualities prediction using the mathematical dynamics model. The analysis results are confirmed through the piloted simulation.

• Journal of Aerospace System Engineering
• /
• v.6 no.2
• /
• pp.23-27
• /
• 2012

The evaluation of simulation models against ADS-33 quantitative rotorcraft handling qualities metrics has, in the past, been a time consuming effort, involving many individual analyses in both the time and frequency domains. Manual tuning of control system parameters to meet handling qualities and performance specifications has been cumbersome and complicated. Performing rigorous trade-off studies for numerous variations in the control system is too time consuming to be practicable. With the complex interaction of time- and frequency based specifications for the closed- and broken-loop responses, it is difficult to know if the design makes the most effective use of the available control power. The Control Designer's Unified Interface (CONDUIT) software makes possible rapid optimization and trade-offs of design configurations against handling qualities specifications.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.185-192
• /
• 2005

The aim of this paper is to analyze handling qualities of tiltrotor aircraft(TR-S4) in helicopter flight mode including hovering and forward flight. Analysis of handling qualities is composed of aircraft response to control inputs that effect on stability and controllability. In short term response analysis, bandwidth is the critical parameter for small amplitude motions since it relates to the ability of a pilot to crisply start and stop maneuver. The handling qualities of TR-S4 in helicopter mode are analyzed with a SAS and an attitude controller and are satisfied level 1 in almost criteria with simulation of TR-S4 6-DOF nonlinear model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.393-400
• /
• 2017

A virtual simulation test program to carry out the handling qualities of unmanned Rotorcraft has developed by using the MATLAB GUIDE(Graphic User Interface Development Environment). The handling quality evaluation program based on ADS-33E contributes to design the flight control system and to evaluate handling qualities. In addition, Linear Quadratic Tracker with Integrator(LQTI) attitude controller based on Linear Quadratic Regulator(LQR) for to rotorcraft BO-105C and the effects of the handling qualities is analyzed change to weight matrices of the Q and R.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2560-2565
• /
• 2003

The paper presented here covers the work associated with the flight control law design, ground based and in flight simulation and handling qualities assessment of the Fly-by-Wire type Aircraft (FBWA). The control law was designed for the most unstable aircraft configuration flight regime for the target aircraft (FBWA). The ground based simulation including math-model, real-time pilot-in-the-loop and iron bird simulation were used for validation of the control law before the experimental in-flight simulation on the IFS (In.Flight-Simulator) aircraft. The flight tests results showed that Level 1 handling qualities for the most unstable flight regime were achieved.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.8
• /
• pp.678-687
• /
• 2012

The Fly-By-Wire(FBW) flight control system is essential to improve the stability and flying quality of the helicopter. Advanced aerospace companies, such as Bell-Sikorsky (USA) and NHI (European Consortium), have already applied the FBW flight control system to manufacture V-22 and NH-90 helicopters, respectively. This paper addresses the development of control law design using model inversion method improve the hover and low speed handling qualities of helicopter based on BO-105 model in 'Day' and 'Degraded visual environments(DVEs)' in accordance with ADS-33E-PRF. Design parameters are optimized to satisfy the handling qualities specification using Control Designer's Unified Interface (CONDUIT) commercial control law software. The result of the analysis based on CONDUIT and non-real time simulation in-house software, HETLAS (HElicopter Trim Linearization And Simulation) reveals that the provides an efficient mean to achieve Level 1 handling qualities.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.103-110
• /
• 2022

Degradation of handling qualities(HQs) due to bad weather or mechanical failure can pose a fatal risk to pilots unfamiliar with such situation. In particular, icing is an important issue to consider as it is a frequent cause of accidents. Most of the previous research works focuses on aerodynamic performance changes due to icing and the corresponding icing modeling or methods to prevent icing, whereas the present work attempts to actively compensate for HQ degradation due to icing on a full-scale helicopter through flight control law design. To this end, the present work first demonstrates HQ degradation due to icing using CONDUIT software, and subsequently presents a robust control design via the RS-LQR(Robust Servomechanism Linear Quadratic Regulation) procedure to compensate for the HQ degradation. Simulation results show that the proposed robust control maintains Level 1 HQ in the presence of icing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.796-805
• /
• 2016

As a part of the first stage in the helicopter flight simulator development, this study numerically evaluates handling qualities of the dynamics model. The flight dynamics model was generated using public information for AS365 N2, the target aircraft of the simulator. The flight simulator is under development as a pilot training and research tool for firefighting missions. The assessment of the model intends to validate general characteristics and suitability before the model is enhanced with flight test data. The evaluation is based on the ADS-33E-PRF(Aeroautical Design Standard Performance Specification Handling Qualities Requirement) criteria, with consideration of category of the aircraft, missions, and environment. The numerical operations follow required or recommended procedures of flight test for compliance demonstration. Evaluation results are evaluated according to the rating specified in maneuverability ADS-33E-PRF. Results have identified to provide a satisfactory platform for flight dynamic model in the general helicopter simulator generated based on the RotorLibFDM, and can be used as a base for basic training and research.

• Journal of Aerospace System Engineering
• /
• v.8 no.3
• /
• pp.20-26
• /
• 2014

This paper presents the procedures and the results of the pitch control force via flight test for a light airplane in order to make out the stability of the aircraft and the compliance with concerned regulation. The flight test procedures were determined in order to obtain the aircraft type certification. The instrumentation equipments including airspeed indicator, accelerometer, and pitch control force measurement tools are used to perform the flight test. For the flight test, the airspeed and the pitch control force with related normal acceleration are measured sustaining turn flight with bank angle derived from trim speed. The flight test results showed that the handling qualities of the airplane are complied with the KAS-23, the regulation of the Korean government for the light airplane type certification.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.79-88
• /
• 2003

The paper presented here covers the work associated with the flight control law design, ground based and in flight simulation and handling qualities assessment of the Fly-by-Wire type Aircraft (FBWA). The FBWA configurations are of the same generic form of the Korean advanced trainer. The normal acceleration (Nz) and pitch rate (q) feedback control system is employed for longitudinal axis and roll rate (p) and lateral acceleration (Ny) feedback flight control law is developed in lateral/ directional axis. The flight tests for the FBW A dynamics evaluation were executed for the target aircraft (FBWA) on the IFS (In-Flight-Simulator) aircraft . The test results showed that Level 1 handling qualities for the most unstable flight regime and Level 1/2 for the landing approach flight regime were achieved. And the designed FBWA flight control law has revealed acceptable CHR (Cooper-Harper handling qualities Ratings).