• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1379-1385
• /
• 2014

Even the rough prediction of the product test time before the lifetime test of mechanical component begins would be of use in estimating cost and deciding how to keep up with the test. The reliability predictions of mechanical components are difficult because failure or degradation mechanisms are complicated, and few plausible databases are available for lifetime prediction. Therefore, this study conducted lifetime predictions of elastomeric U seals that were respectively installed in a hydraulic actuator and a pneumatic actuator using lifetime models and a field database based on failure physics and an actual test database obtained from the NSWC handbook. To validate the results, the predicted failure rates were compared with the actual lifetime test results acquired in the lab durability tests. Finally, this study discussed an engineering procedure to determine the coefficients in the failure rate models and analyzed the sensitivity of each influential parameter on the seal lifetime.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.4
• /
• pp.239-243
• /
• 2006

Due to the development of new dosage forms and the improvement or pharmaceutics, the pharmaceutical excipients have become more specified and diverse, and the reclassification on them became necessary. Also with the increasing interests on the kinds and usage amount, related provisions, and evaluation of the pharmaceutical excipients, the systemic and effective control of them was in its demand. Therefore, in this research, we provided the following information on excipients: the type, amount and specification. In order to provide the information, we investigated, analysed and summarized the excipients that are approved by KFDA and published $\ulcorner$Handbook of Pharmaceutical Excipients$\lrcorner$). This handbook is expected to be used as a reference in the development of the pharmaceutics and evaluation in them. As the importance of excipients in pharmaceutics are increasing, IPEC which consist of IPEC-America, IPEC-Europe and JPEC, PDG and ICH have tried to make an international harmonization on excipient. This current status was not an exception to Korea, therefore, the result of this research is expected to make a progress in the evaluation on the excipients to an advanced level.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.84-93
• /
• 1987

The water solubilities and vapor pressures of chlorothalonil and Command were measured following the guidelines of the U.S. EPA and OECD. Water solubility of the two compounds is consistent with respective values in the literature. However, the vapor pressures of Chlorothalonil and Command were 5,000 times$(2{\times}10^{-7}\;torr\;at\;25^{\circ}C)$ and 100 times$(<1{\times}10^{-6}\;torr\;at\;45^{\circ}C)$ lower than the literature values, respectively. Courteous use of the vapor pressure values in the handbooks is suggested. With this study, experimental difficulties involved were recognized. Based on the low vapor pressure of Command, the cause of the accidental bleach of non-target plants in the United States might not be attributed to the volatilization of Command, but to the drift during the application of the herbicide. These approaches will be utilized to predict the environmental fate of new chemicals under development, to screen the potential environmental pollutants among chemicals already in use, and to assess measures to minimize the hazards.

• Journal of Educational Research in Mathematics
• /
• v.19 no.4
• /
• pp.513-530
• /
• 2009

In this paper, We analyse the contents of the national mathematical curriculum, the handbook of the curriculum, and elementary school mathematics textbook for the elementary school grade 1-2 focusing on 'number sense'. At first, we identify the meaning and the elements of number sense through analysing studies which are related to number sense. Number sense includes understanding the meaning of number, operation, and estimation, and the ability of applying numbers, operation and estimation on the context. Number sense consists of the elements of the contents and the elements of the processes. Secondly, with the elements of number sense which we have identified, we analyse the contents of the national mathematical curriculum, the handbook of the curriculum, and elementary school mathematics textbooks, and then criticize the contents. We find some problems as a result of the analysis : the range of number sense is unclear, the word 'number sense' is not used consistently, the elements used are limited, and the contents of the textbook are materialized inconsistently and poorly.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.203-210
• /
• 2005

Prototype model of MDU(Master Data Unit), to be employed on KSLV-I, has been developed and tested being interfaced with other units. Before stepping into the development of engineering and flight model phases, we have carried out reliability prediction of prototype MDU in order to assure availability of the unit. This paper describes the method of reliability prediction of prototype MDU and prediction results based on MIL-HDBK-217F, 'Electronic Reliability Design Handbook'.

• Korea Multimedia Society
• /
• v.22 no.1
• /
• pp.26-33
• /
• 2018

The transformation of the processes of governance using the Information and Communication Technologies is aimed at bringing in faster and transparent service delivery, accountability, information sharing and people participation in the decision-making and government processes. The implementation of e-Government requires a comprehensive strategy that is not only sensitive to existing political and economic conditions and realities but is also benchmarked on global best practices. The article reviews the handbook E-Government and Governance Efficiency that provides an insight to research that is being undertaken in the e-Government area, gives an in-depth understanding of critical issues involved in e-Government, and provides expert opinion and recommendations for the Republic of Belarus to augment its potential. It studies the Korean experience on e-Government with special focus on such concepts as e-Government benchmarking, mGovernment, Smart Government and u-Government.

• IE interfaces
• /
• v.15 no.3
• /
• pp.308-315
• /
• 2002

This study presents the web based cutting parameter selection system using Group Technology (GT). The GT is basically applied to classify and code the work material and cutting process which are main factors to affect cutting parameter selection. The proposed system has been designed to electronically select proper cutting conditions based on the stored GT database. The existing approaches used in most small and medium sized companies are basically to use manufacturing engineer's experience or to find the recommended values from the manufacturing engineers handbook. These processes are often time consuming and inconsistent, especially when a new engineer is involved. Consequently, the proposed system could automatically and consistently generate the proper cutting conditions (feed, depth of cut, and cutting speed) as soon as relatively simple data input is given thanks to the classified GT database.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.2
• /
• pp.94-100
• /
• 1993

이번 호부터 해설란을 통하여 비파괴검사(非破壞檢査) 기술(技術)에 대한 연재를 시작한다. 앞으로 비파괴검사(非破壞檢査) 기술(技術) 각 분야에 대해 다룰 예정이며 우선 1차적으로 와전류탐상법(渦電流探傷法)에 관해 3회에 걸쳐 게재하기로 한다. 특정한 비파괴검사(非破壞檢査)의 전문가가 아니더라도 쉽게 이해할 수 있도록 가급적 수식은 배제하고 기초적인 이론을 소개할 것이며 특히 현장 적용에 중점을 두어 기술(記述)하고자 한다. 본 원고에서는 원거리 와전류탐상법(渦電流探傷法)(remote field eddy current testing) 이나 펄스 와전류탐상법(渦電流探傷法)(pulsed eddy current testing)과 같은 특수 와전류(渦電流) 기술(技術)은 제외하였으며 본 연구실에서 내부 교육용으로 사용하는 "와전류탐상법(渦電流探傷法) Level I 과정"과 미국금속학회에서 발행한 Metal Handbook, 9th ed., Vol. 17, "Non-destructive Evaluation and Quality Control" 및 기타 관련 기술 자료들을 참고하였으나 일일이 명기하지는 않는다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.160-167
• /
• 2018

The purpose of this study is to develop a process for forming a MPa ultra-high strength steel sheet to reduce weight and improve product strength. To do this, we performed the initial process design based on empirical formulas in a handbook and experience of skilled engineers, and researched the effects of major process variables on spring back by analyzing the forming analysis and experimental results. This paper suggests an optimal process design of the seat rail lower parts, using a MPa ultra-high strength steel sheet. This satisfies the dimensional accuracy and strength requirements for the product.

• International Journal of Quality Innovation
• /
• v.5 no.2
• /
• pp.141-158
• /
• 2004

The Taiwan National Quality Award (TNQA) has been conducted for 14 years. However, small and medium-sized companies (SMSCs) rarely win the TNQA. This study undertakes a capability analysis to explore how SMSCs do win the TNQA. A survey instrument involving 149 questions extracted from 'the 2001 Handbook of Standard Criteria for Evaluation of TNQA' is used to measure the capability of SMSCs in competing for the TNQA. The paper concludes with a summary of the essential qualities required by an SMSC if it is to compete successfully for the TNQA.