• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.161-169
• /
• 2009

The objective of this study was to investigate stability of Korean Paper(Hanji) which is being sold in the Korean markets according to aging treatment. In order to know the aging characteristics, the optical and mechanical properties of before and after wet and dry-heat aging treatment were examined. The optical and mechanical properties were shown higher reduction in the dry-heat aging treatment compared to the wet-heat aging treatment. The Soonji (pure mulberry Hanji) made from black mulberry bast pulp was shown a great reduction of the brightness and whiteness, and increase of the opacity in the aging treatment. On the other hand, in case of mechanical properties, the breaking length of Soonji made from white mulberry bast pulp was significantly higher than that of the others, and the tensile strength was shown drastic reduction in according to Soonji made from black mulberry bast pulp in the aging treatment. The burst strength of Soonji made from black and white mulberry bast pulp was shown the similar value in the wet-heat aging treatment. The folding endurance of Soonji made from white mulberry bast pulp was significantly higher than that of others before and after aging treatment. Consequently, Hanji was affected sensitive in the temperature compared to the humidity. Meanwhile, the density and color of the chinese ink was no significant changes before and after wet and dry-heat aging treatment.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.717-722
• /
• 2004

A design was done, and all characteristic of photodetectr of the web pattern type which a standard process of the Bipolar which Si PIN structure was used in this paper, and was used for the current amplifier design was used, and high-speed, was used as receiving optcal area of high altitude, and the module which had a low dark current characteristic was implemented with one chip with a base. Important area decreases an area of Ie at the time of this in order to consider an electrical characteristic and economy than the existing receiving IC, and performance of a product and confidence are got done in incense. First of all, the receiving IC which a spec, pattern of a wafer to he satisfied with the following electrical optical characteristic that produced receiving IC of 5V and structure are determined, and did one-chip is made. On the other hand, the time when AR layer of double is $Si_{3}N_{4}/SiO_{2}=1500/1800$ has an optical reflectivity of less than $10{\%}$ on an incidence optical wavelength of 660 ,and, in case of photo detector which reverse voltage made with 1.8V runs in 1.65V, an error about a change of thickness is very the thickness that can be improved surely. And, as for the optical current characteristic, about 5 times increases had the optical current with 274nA in 55nA when Pc was -27dBm. A BJT process is used, and receiving IC running electricity suitable for low voltage and an optical characteristic in minimum 1.8V with a base with two phases is made with one chip. IC of low voltage operates in 1.8V and 3.0V at the same time, and optical link receiving IC is going to be implemented

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.3
• /
• pp.203-211
• /
• 2007

This study was conducted in cut rose cultivation field in Goyang to evaluate pesticide exposure of farmers and the relationship between the exposure and work environment/method for cut rose farmers. Dermal exposure was assessed with patch (thin chromatography layer paper), cotton glove by body parts during mixing and spraying works in which pyrethroid, organophosphate, carbamate pesticide were used in 4 cut rose greenhouses located in Goyang province, checking characteristics of environment/working method at the same time. Body parts assessed were as follows ; glove : hand, patch : head, neck(front/back), chest, back, shoulder(right/left), upperarm(right/left), forearm(right/left), thigh(right/left), shin(right/left). Pesticides were analyzed using gas chromatography(NPD/FID) after extracting with ethyl acetate. Exposure amount differed according to pesticide type. But after standardizing with total net weight of pesticide sprayed, there were no significant difference among pesticides. There were significant difference in exposure amount among body parts(especially exposure amount of thigh, shin were more than the others), which means exposure happen not by pesticide dispersion in air but by contact with cut rose(leaf, branch) indirectly. Walking forward during spraying made farmers more exposed than waling backward, these results means contacts with leaves/branches made exposure happen in cut rose greenhouse also. As a result, pesticide exposure in cut rose greenhouse was related with contact of leaf/branch which pesticide remained in, which made exposure pattern (especially exposure amount) differ by body parts

• Journal of Fisheries and Marine Sciences Education
• /
• v.11 no.2
• /
• pp.150-183
• /
• 1999

Korea-Japan Fisheries Agreement concluded in 1965 made a contribution to the stable development of fisheries relationship for both countries until the year of 1980. From the time on thereafter a series of respectable fishery disputes occurred throughout the period of fisheries self-regulation in accordance with alteration of home and abroad conditions. And both countries marched into a cooperation era by enforcement of the new fisheries agreement from the 23 January 1999, because the Fisheries Agreement system of 1965 had many limitations to settle the fundamental fisheries problems. In this paper, the author carried out the legal interpretation, arrangement of historical facts and evaluation of actual results of the Korea-Japan Fisheries Agreement of 1965. The key contents of the Fisheries Agreement were the establishment of 12-nautical mile exclusive fishery zone and the joint-control fishery zone under the principles of maintenance of MSY for fishery resources, freedom of high seas and mutual cooperation. The legal foundation of the conclusion of the Fisheries Agreement were the San Francisco Peace Treaty of 1952 and the four International Conventions on the Law of the Sea of 1958. During the 33 years, the fisheries power of Korea made a rapid stride, on the other hand that of Japan was almost stagnated. And in the meantime, there were very important development on the international law of the sea, for instant, the settlement of 12-nautical mile territorial sea regime and the establishment of 200-nautical mile exclusive economic zone regime. Annual meetings of the Joint Fisheries Committee were not successful to fill the role for conservation of fishery resources. The Fisheries Self-Regulation Agreement concluded in 1980 was also insufficient to accept the new international regime on the law of the sea, for that reason it was terminated on 23 January 1999. But it is true that the Fisheries Agreement of 1965 made a contribution to normalization of fisheries relationship between both countries and fisheries development of Korea.

• Conservation Science in Museum
• /
• v.28
• /
• pp.65-88
• /
• 2022

The characteristics and behavior of bullets are important because they are directly related to the firearm performance. However, research related to bullets have been small. In this paper, scientific analysis was conducted to find out the materials and manufacturing process of metal bullets during the Joseon Dynasty, owned by Korea Army Museum, and the types of firearms available were classified and organized according to the bullet diameter. As a result, bullets were classified into iron bullets, lead bullets, and lead-coated iron bullets. Most of the iron bullets and lead bullets were made from casting. Some iron bullets were made from forging. And the lead-coated iron bullet was made by pouring molten lead after putting the iron bullet into the mold. Finally, the bullets could be used for Hand Cannon, Matchlock Musket, Frankish Cannon, Hyeon-ja Cannon, Dae-Wiwon Cannon, Small Cannon, and Hong-Yi Cannon.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.5
• /
• pp.72-79
• /
• 2000

On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard. Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and cockling tendency, and provides the necessary information to fine-tune the manufacturing process for optimum quality. Many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, being beyond the measurement range of the traditional instruments or resulting inconveniently long measuring time per sample. The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, non-leaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layers of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow n well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. Hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly as planned (having even small measurement error or malfunction), the process control will set the machine to operate away from the optimum, resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.05a
• /
• pp.190-191
• /
• 2007

Cleanout of the F Reactor Fuel Storage Basin (FSB) is an element of the FSB decontamination and decommissioning (D&D) and is required to complete interim safe storage (ISS) of the F Reactor. Following reactor shutdown and in preparation for a deactivation layaway action in 1970, the water level in the FReactor FSB was reduced to approximately 0.6 m (2 ft) over t]to floor. Basin components and other miscellaneous items were left or placed in the FSB. The item placement was performed with a sense of finality, and no attempt was made to place the items in an orderly manner. The F Reactor FSB was then filled to grade level with 6(20of local surface material (essentially a fine sand). The reactor FSB backfill cleanout has the potential of having to remove spent nuclear fuel (SNF) that may have been left unintentionally. Based on previous cleanout of six water-filled FSBs with similar designs (i.e., the B, C, D, and DR FSBs in the 1980's), it was estimated that up to five SNF elements could be discovered in the F FSB (I). In reality about 17 full SNF elements were found in the excavation. This paper covers the technical and programmatic challenges of performing this decommissioning effort with some of the controls used for SNF management. The paper also will highlight how many various technologies were married into a complete package to address the issue at hand and show how no one tools could complete the job, but combined, good progress is being made.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.16 no.2
• /
• pp.43-59
• /
• 2005

Traditional paper records have to be preserved in the original form to ensure the authenticity. On the other hand. electronic records have to be continuously changed in content itself or metadata to be preserved in long-term period, so the proof of the legality of each change made so far and the proof of the protection against all the illegal changes are the essential. to ensure these requirements. We need some functions including the authentication of original captured records. the protection of records against the loss or forgery, the authentication of preserved records, and the treatment of authentication-failed records. This paper explains the fragility of authenticity for electronic records, identifies the functions needed, suggests the implementation idea, and describes the overall management polity for electronic records to ensure the authenticity.

• Journal of Korean Library and Information Science Society
• /
• v.38 no.4
• /
• pp.325-340
• /
• 2007

This paper aims to present a brief overview of consortia' initiatives that have been taking place at national and International level. The developed countries witnessed the progressive growth of consortia initiatives; on the other hand, the situation is not encouraging in developing countries like India. Therefore in this paper an attempt has been made to trace the current developments in consortia awareness in Engineering Educational Institutions. For this purpose, a survey of Engineering Educational Institutions in Tamil Nadu has been considered to measure the consortia awareness and also the attitude towards Joining any consortia. Based on the results of the survey a model consortium has been proposed for the Engineering Educational Institutions in Tamil Nadu.

• Convergence Security Journal
• /
• v.10 no.3
• /
• pp.51-60
• /
• 2010

The expansion of internet technology has made convenience. On the one hand various malicious code is produced. The number of malicious codes occurrence has dramadically increasing, and new or variant malicious code circulation very serious, So it is time to require analysis about malicious code. About malicious code require set criteria for judgment, malicious code taxonomy using Algorithm of weakness difficult to new or variant malicious code taxonomy but already discovered malicious code taxonomy is effective. Therefore this paper of object is various malicious code analysis besides new or variant malicious code type or form deduction using visualization of strong. Thus this paper proposes a malicious code analysis and grouping method using visualization.