• Journal of the Korean Society of Radiology
• /
• v.9 no.6
• /
• pp.349-356
• /
• 2015

The study is to recognize the interactions with bone ages by measuring the length between the end of the bone and the growth plate on selected highest weight of regions of seven for bone maturity in TW3 method. The experiment is subjected on seventy-two children (36 males, 36 females) who have examined the growth plate test from March, 2014 to March, 2015 and implemented a regression analysis by measuring the length between the end of the bone and the growth plate in Hand AP image of the children. In result, each bone age has produced a mean value and a standard deviation corresponding to the specific range and as bone age increases the length between the end of the bone and the growth plate decreased. In addition, female children showed lower mean value in comparison to male and also the measurement of the length between the end of the bone and the growth plate and its bone age are shown to be statistically valid(p<0.001) according to the results of regression analysis using its result value. Therefore, the probability of prediction on the bone age read off through the applied TW3 method and regression equation in the Hand AP image of the children.

• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.205-211
• /
• 2008

A method of detecting the specific patterns related to hand motions using the surface EMG(electromyogram) on an arm is proposed and tested. To do this, we obtain separately modeling parameters based on the LP, Prony estimator, and calculate the latency shift value between channels by cross-correlation function. Then, the coefficients and latency shift value are applied to the detection method to classify the EMG signals related to hand motions. Compared with the conventional methods, the present method are more useful to detect the motion intention of the user as an input device in the mobile and wearable computing environments. And, We expect that the results of this study are helpful in the development of rehabilitation devices for the handicapped.

• 대한예방의학회:학술대회논문집
• /
• 1994.02b
• /
• pp.84-86
• /
• 1994

AS A SOCIETY, we are in conflict with ourselves about the cost of health care. 1 On one hand, we want the best care possible, regardless of cost. On the other hand, we are not willing to pay the cost of the care we want. Our conflict parallels a flaw in the medical marketplace. An essential condition for achieving an equilibrium between cost and value is that the two must be connected through decisions. When people decide what products and services (goods) they want, they must not only see the value they will receive, but they mast also be responsible for the costs. Because of a variety of features of the medical marketplace-most notably third-party coverage, third-party advice, and uncertainty about outcomes-the required connection between value and cost is severed. The result is what we see. One side of our collective mind demands more services while the other side cries that costs are too high. Resolving our conflict will require connecting value to cost. An essential step in accomplishing this will be to incorporate costs in practice policies. 1 As controversial as that thought might seem (the great majority of practice policies currently do not take costs into account except in the most rudimentary way), arriving at the conclusion is the easy part. A more difficult issue is how to implement the goal of connecting value to cost. Suppose we agree that, in principle, costs should be considered when practice policies are designed, and that an activity should be recommended and covered only if its health outcomes (benefits minus hanns) are deemed to be worth its costs. The next questions are, Who should do the deeming? What should the deemers be asked?

• Journal of ILASS-Korea
• /
• v.24 no.3
• /
• pp.114-121
• /
• 2019

The effect of injector driving current pattern on fuel injection rate of solenoid diesel common rail injector was studied by computer simulation. The time resolved fuel injection rate and injected quantity per stroke of a common rail injector driven with the five current patterns were computer simulated. The fuel injection rate and injected quantity per stroke according to the rail pressure and fuel injection period were also computer simulated. When the common rail injector was driven with the five driving current patterns of peak & hold, there was no difference in the fuel injection rate in the peak section regardless of all the current patterns of the five cases. On the other hand, the magnitude of the hold current value influenced the injection rate and injected quantity per stroke. That is, in the current pattern of three cases where the hold current value is equal to or more than a constant value of the peak current value, the fuel injection rates for the given common rail rail pressure and injection period are same one another. On the other hand, the current pattern of the two cases, in which the hold current value is smaller than a certain value, there is a large fluctuation in the fuel injection rate.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.987-996
• /
• 2005

For cationization, if chitosan, which has the affinity for a human body and reacts easily without inducing any pollution, is used, cationization of Tencel blended fabrics can be expected and further expansion of its use as a new susceptible material can be expected. Therefore, in this study, in order to compare a Tencel/cotton and a Tencel/Cotton/PET as Tencel blended fabrics with a Tencel single fabric, the fabric samples were used and processed with chitosan after NaOH pretreatment and enzyme treatment thereof, and then its adherent efficiency was enhanced by using a crosslinking agent, and then it was got to be finished with a softener. The fibril of Tencel fabric was controlled by enzyme treatment so that the surface of the Tencel blended fabrics got to be smooth. Chitosan adhered to the surface of the Tencel blended fabrics in the form of particles through its processing with chitosan. Chitosan treatment caused little change in the crystal structure thereof and the thermal stability of the Tencel/Cotton/PET fabric was slightly improved. The total hand value(THV) calculated on the basis of the change due to chitosan treatment was increased in all samples.

• The Journal of Information Systems
• /
• v.18 no.3
• /
• pp.27-46
• /
• 2009

Korean society frenzy about ubiquitous computing is in a rapid change into so called 'Nomadic' information environment. In many previous studies, a number of intrinsic and extrinsic motivation factors were empirically found to affect users' continuance to use mobile hand-held devices. However, the role of device attachment, a new intrinsic motivation factor with which users are known to care about their own mobile devices personally, in determining users' post-adoption behavior was not explored yet to the full scale. To fill the research void like this, this study proposes a new research model in which device attachment as well as perceived value are positively linked to satisfaction and continuance to use. The statistical results obtained by applying PLS to the valid 137 questionnaires showed that the device attachment has stronger positive influence on satisfaction and continuance to use than the perceived value. Therefore, a practical implication is suggested thai the mobile devices need 10 be designed in a way of arousing users' device attachment more strongly.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.21-29
• /
• 2009

In order to enhance the functionality of a cotton fabric actually used as a clothing material for patients, the fabrics were treated with a chitosan/nanosilver mixed solution. The nanosilver had excellent biocompatibility, provided expectation of an additional performance, did not harm human beings, and supplements chitosan, which was disadvantaged if used alone for fabric treatment. The nanosilver was mixed thereto and a treatment effect due to a mixing ratio was considered. This study was observed through mechanical properties and hand value which were the important function. The treatment of chitosan/nanosilver mixed solution gave a smoother surface than the treatment of chitosan alone. As a result of evaluation of the forms according to KES-FB system, Koshi was deduced, and both Numeri and Fukurami were increased. Thereby, the cotton fabric was a little smooth to provide elasticity, due to the treatment of chitosan/nanosilver mixed solution. THV of the treated fabrics calculated from this basis increased at all mixing ratio as compared with the untreated fabric. The fabrics treated with chitosan/nanosilver mixed solution were shown a better THV than the fabric treated with chitosan alone.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.296-304
• /
• 2012

For development of dyeability, the cotton fabric was dyed repeatedly with persimmon juice by padding mangle. We evaluated the mechanical properties and hand value by Kawabata Evaluation System, and observed the change of surface morphology. The results obtained from this study were as follows. With the increase of repeating padding times of dyeing, the linearity of load-extension curve and tensile energy per unit length of the cotton fabric were increased, but the tensile resilience of fabric was decreased. The value of shear stiffness and shear hysteresis were increased. Also compression resilience and linearity of compression thickness curve were increased. The cotton fabric dyed with persimmon juice had shown the thickness and weight increase as the number of padding increase. As repeating times of dyeing with persimmon juice were increased, among the 6 hand values, the item of stiffness, anti-drape stiffness, fullness and softness were increased, while flexibility with soft feeling and crispness were greatly decreased. The amount of coated persimmon juice on the surface of the fabric was gradually increased as the padding times of dyeing. And cotton fabrics were dyed evenly with persimmon juice by padding mangle.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1138-1150
• /
• 1996

This study was carried out to investigate the effects of dyeing on the mechanical properties, primary hand, total hand value (THV), and total appearance value (TAV) of woven fabrics. Cotton, PET, nylon, cotton/PET, and cotton/nylon woven fabrics were used as test specimens. Each of fabric was dyed under the same conditions as the fabrics for sportswear which consumers have selected as best. Mechanical properties of specimens were measured by KES-FB system and primary hand and THV were calculated by equation KN -201-MDY and KN-301-WINTER respectively. TAV was calculated by KN (eq. 10). The results were as follows: 1. In mechanical properties. tensile energy increased when cotton and two cotton mixture fabrics were dyed and decreased when polyester and nylon fabrics were dyed. Bending rigidity and shear rigidity decreased after all fabrics were dyed except nylon and cotton/ nylon mixture fabrics showing higher rigidities. Cotton fabrics showed higher surface roughness while other fabrics did lower values after dyeing. 2. In evaluation of primary hand and total hand , four primary hands of cotton fabrics so decreased after dyeing that THV were lowered. Numeri, Fukurami, and Sofutosa in primary hand of polyester, cotton/polyester, and cotton/nylon fabrics and Koshi and Numeri of nylon fabrics increased after dyeing and therefore THV of four fabrics were improved. 3. Cotton and polyester fabrics showed higher TAV due to their lower bending and shear rigidity, while nylon and cotton/nylon fabrics did lower values due to their higher shear rigidity. 4. It was proposed that the method of dyeing or treatment for minimizing the decrease of THV of cotton fabrics and TAV of nylon fabrics should be developed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.6 s.154
• /
• pp.870-879
• /
• 2006

In this study, the difference in the mechanical properties of silver and cotton weft knitted fabrics was studied. Six silver fabrics for the summer ladies' knit outwear were knitted varying knit structure and fabric density. Two commercial cotton knitted fabrics were selected to compare the properties. subjective sensation of hand of the fabrics was also studied. Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(THV) was carried out according to the KW-304 Summer. The result of the research show that silver weft knitted fabrics had lower LT, RT, G, 2HG and higher EM, W, LC, WC, RC than cotton weft knitted fabrics. The use of silver yam contributed to increase in surface roughness of knitted fabrics. As the silver knitted fabrics became thicker compressional energy increased. The use of silver yarns contributed to much better fabric handle compared with the use of cotton yam only. It appeared that coefficient of friction of tuck stitch was larger than that of plain and interlock stitch. KOSHI and FUKURAMI values of the tuck samples were significantly higher than those values of the plain and interlock samples, while SHARI values were low in general. The total hand value of tuck stitch was higher than those of interlock and plain stitch.