• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.473-477
• /
• 2017

고분자 전해질 연료전지(PEMFC)의 고분자 막은 PEMFC 성능과 내구성에 많은 영향을 준다. 본 연구에서는 고분자막의 두께가 성능과 내구성에 미치는 영향을 파악하기 위해 두께가 다른 Nafion 막의 수소투과도, 불소 유출 속도(FER), 수명, 성능을 측정했다. 막 두께에 따른 수소투과도, 수소투과도와 FER과의 관계, FER과 수명과의 관계로부터 막 두께와 수명의 관계를 얻었다. 막이 두꺼워지면 수소투과도와 FER이 작아지면서 수명이 증가하였다. 반면에 막이 두꺼워지면 막 저항이 증가하면서 성능은 감소하였다. 성능과 내구성을 동시에 만족시키는 막 두께 범위는 $25{\sim}28{\mu}m$였다.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.13-18
• /
• 2021

In plate forming technology, cylindrical drawing process is widely used in industry due to technological development. In this study, we used stainless steel 3042B and stainless steel 304J1, which are the most commonly used materials in the production of cold and hot water tanks for water purifiers, among cylindrical drawing products. Under the same conditions, the thickness of the sidewall of the product formed by drawn experiment was studied. As a result of the experiment, the bottom thickness of stainless steel 304J1 was considered to be thick. It is judged that the defect rate can be reduced by changing the breaking phenomenon of the floor surface of the cold and hot water bottles to the material of stainless steel 304j1. Stainless steel 304 2B material shows a sharp change in thickness from punch corner R to sidewall position, while stainless steel 304J1 material showed a uniform change from punch corner R to sidewall position. Stainless steel 304J1 material is considered to improve the clamping of the product in the process of extracting the product after hand drawing. The appearance of stainless steel 3042B products is considered to produce more wrinkles in the flange, which exerts greater tensile force on the sidewall during molding, resulting in uneven sidewall thickness.

• 한국의류학회지
• /
• 제28권8호
• /
• pp.1153-1164
• /
• 2004

The purpose of this study was to knitted nine kinds of single knit and examined mechanical properties and hand to provide the fact that knit, tuck and miss stitch applied to various structure have an effect on hand of weft knitted fabrics. It was good to use tuck stitch rather than miss stitch to increase elasticity of knitted fabrics. As tuck stitch and miss stitch were double or triple overlaps, tensile resilence(RT) decreased by increase of friction contacted among stitch. As cross tuck stitch and cross miss stitch were knitted double or triple, bending rigidity(B), hysteresis of bending moment(2HB) and shearing(G) properties increased by jamming of stitch. As tuck stitch and miss stitch were overlap, thickness increased and they became thicker than miss stitch. Also, as they became thicker by these tuck stitch and miss stitch, compressional energy(WC) increased. It appeared that coefficient of friction(MIU) of cross tuck stitch was larger than coefficient of cross miss stitch. Mean deviation of surface roughness(SMD) had a tendency to be larger as tuck stitch and miss stitch increased. As cross tuck stitch and cross miss stitch were overlaps double or triple, KOSHI and FUKURAMI increased, total hand value(TIV) and NUMERI appeared high in double cross tuck stitch and double cross miss stitch.

• 한국지능시스템학회논문지
• /
• 제14권4호
• /
• pp.506-511
• /
• 2004

최근 몇 년 동안 사람들의 고유한 생리적인 특징을 이용한 생체 인식은 새로운 학문으로서 연구 및 개발이 활발하게 진행되고 있다. 지금까지, 오로지 지문 인식만이 다른 생체 인식에 비해 확인과 식별 시스템들이 더 정교하고, 비싼 취득 인터페이스들과 인식 과정을 필요로 하기 때문에 온라인 보안 검사를 위하여 한정된 성공을 보았다. Hand-Geometry는 생체 인식의 확인 그리고 취득의 편리 때문에 식별 그리고 확인을 위하여 사용되고 있다. 그러므로, 본 논문은 이러한 특징을 가지는 손의 기하학적인 Hand-Geometry 인식 시스템을 제안하고자 한다. 해부학적인 관점에서, 인간의 손은 길이, 폭, 두께, 기하학적인 모양, 손바닥의 모양, 그리고 손가락들의 기하학적인 모양까지 특성으로 나타내어질 수 있다. 본 논문에서 제안한 Hand-Geometry 인식 시스템은 30개의 특징 데이터를 가진다. 그러나 특징 데이터 가운데 사용자의 Hand-Geometry의 특징에 따라 길이 데이터가 변하는 것을 실험적으로 발견하였다. 따라서 이와 같은 가변적인 길이 데이터를 안정화시키기 위하여 본 논문에서는 길이 데이터의 기준점을 손톱 아래 점으로 정하고, GA를 적용하여 보다 안정된 특징점을 추출하였다.

• Journal of Veterinary Science
• /
• 제24권1호
• /
• pp.14.1-14.15
• /
• 2023

Background: The management of feline hindlimb full-thickness skin defects is challenging. On the other hand, the use of a semitendinosus (ST) myocutaneous flap for their coverage has not been reported. Objectives: To describe the ST flap and compare it with second intention healing for managing hindlimb full-thickness skin defects. Methods: In 12 purpose-bred laboratory domestic short-haired cats, two wounds were made on each tibia. The wounds in group A (n = 12) were covered with ST flaps, and those in group B (n = 12) were left to heal by second intention. In both groups, clinical assessment scoring and planimetry were performed between one-30 d postoperatively. Computed tomography-angiography (CTA) was performed on days zero, 10, and 30, and histological examinations were performed on days zero and 14 and at 6 and 12 mon postoperatively. Results: Statistically significant differences in the clinical assessment scores were observed between groups A and B on days 14 (p = 0.046) and 21 (p = 0.016). On the other hand, the time for complete healing was similar in the two groups. CTA revealed significant differences in the muscle width (day 0 compared to days 10 and 30 [p = 0.001, p = 0.026, respectively], and days 10 to 30 [p = 0.022]), ST muscle density, and the caliber of the distal caudal femoral artery and vein (day 0 compared to day 10 [p < 0.001], and days 10 to 30 [p < 0.001]). Histologically significant differences in inflammation, degeneration, edema, neovascularization, and fibrosis were observed on day 14 compared to zero and 6 mon, but no differences were found between the time interval of 6 and 12 mon. Conclusions: An ST flap can be used effectively to manage hindlimb full-thickness skin defects.

• 복식
• /
• 제54권1호
• /
• pp.1-10
• /
• 2004

The purpose of this study was to compare the efficiency of four different cleaning method of silk and to fabrics, which were excavated from the sixteenth century tombs. The four cleaning methods were hand washing in water and hand washing in solvent, washing in ultrasonic cleaner, and using of ultrasonic gun after washing in ultrasonic cleaner. The following is the result of the experiment: ㆍBoth silk and jute fabrics shrank the most after hand-wash in water. This cleaning method decreased their thickness the most but changed their strength the least. However, the color of the fabric changed the most after had-wash in water. This washing method might discolor the dyed fabric, so one must check the condition of the fabric thoroughly before washing it. ㆍThe weight and the thickness of the fabric changed little after ultrasonic cleaning. This cleaning method, therefore. is less efficient than hand-water-wash. The use of ultrasonic gun after ultrasonic wash for partial cleansing enhanced the efficiency a little. Nevertheless, this method left stain around the area where the gun was used, and the injected water could damage the fabric. ㆍThe excavated fabric became softer in the cleaning process as the dirt was washed away. In both cases of silk and jute fabrics cleaning, solvent made the fabric softer than water. Washed in solvent, the fabric did not swell. But water penetrated to the fiber during the cleaning process and made the fabric swell. When the water evaporates, the swollen fiber structure collapses and the fabric become stiff. Ultrasonic wash did not cause much change in the flexibility of the fabric, for this method does not remove the dirt as effectively as the other method.

• 한국임상보건과학회지
• /
• 제1권2호
• /
• pp.31-37
• /
• 2013

Purpose. This study was to investigate the analysis of the central corneal thickness and anterior chamber depth of eyes in Korean Young Population using the Pentacam topography. Methods. The subjects consisted of 126 eyes from normal cornea of Korean aged 7-12($8.857{\pm}1.501$) years during 2009. The thinnest location, pachy apex, and pupil central region of the cornea thickness was measured using the Pentacam pachymetry. The anterior chamber depth of normal corneas was measured with Pentacam. Results. The thinnest location of corneal thickness was $547.413{\pm}37.893$um. The pachy apex of cornea thickness was $552.103{\pm}36.016$um. Also, the pupil center of corneal thickness was measured $552.143{\pm}36.418$um. On the other hand, the mean thickness in the central cornea was a statically significant relationship(t-test, p=0.0002) between pachy apex and thinnest zone. Also the mean thickness of the central cornea was a statically significant correlation(pearson p=0.0001) among the pupil center, pachy apex and thinnest zone. The anterior chamber depth was $3.137{\pm}0.308$mm. The mean depth in the anterior chamber of cornea was a statically relationship(t-test, p>0.05) between OD and OS. Conclusions. The results of this clinical study suggested that the analysis of the central corneal thickness and anterior chamber depth using Pentacam in Korean young population can provide the useful morphological information in diagnosis of cornea for the contact lens fitting and corneal refraction surgery.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.19-24
• /
• 2008

This paper presents and discusses the experimental results on the F10T high strength bolts used in the T-flange joint structure. The experimental works were carried out for the parameters which are flange web thickness, the distance between bolts, prying ratio. The results show that the working stress imposed to bolts decreases as the flange web thickness increases on the other hand the imposed stress to the bolts increases as the distance between two bolts increases. In other words the strength of the T-flange joint increased as the web flange thickness increases and the distance between two bolts decreases. The prying ratio is increased as the distance between two bolts increases and as the flange web thickness decreases However, the degree of stress decrease in flange thickness variation is not that high as the distance variation between two bolts. Finally the equation for predicting the failure stress in T-flange joint structure using F10T high strength bolts was suggested.

• 한국의상디자인학회지
• /
• 제15권4호
• /
• pp.143-155
• /
• 2013

This study examined the motif, weave structure, fabric density, and thread thickness of the patterned silks excavated from the Lady Lee's Tomb to trace the weave composition of the 18th Century in Korea. Different weave compositions were adopted depending on the weave structure. Two weave structures appeared in these patterned silks : simple gauze and satin damask. In the case of simple gauze Jergori, all the components, Gil(bodice), Somae(Sleeve) had similar fabric density and thread thickness. On the other hand, the satin damask Jergoris was composed of the components of different fabric density and thread thickness. According to the fabric density and thread thickness, the motif sharpness of damask Jergori was represented in three different ways : smooth and clear, rough and clear, and rough and vague. This revealed that Lady Lee selected not only pattern but also fabric density and thread thickness in the design of damask Jergori.

• 대한가정학회지
• /
• 제12권1호
• /
• pp.459-471
• /
• 1974

This study was carried out on the thermal transmission on account of variation of weaves and researched on the selection of the most suitable weaves for warmth. Also the interrelation among the density, thickness and thermal transmission by different weaves was studied, the author has woven three fundamental weaves, five weaves derived from the fundamental weaves and two special weaves for the purpose of experiment. In weaving of fabrics for experiments the lever type hand loom was used. Testing of texture was carried out according to KS and ASTM. The thermal transmission was also tested by as cooling method which were developed by the author. The conclusions of experiments were as follows. 1. Matt weaves, honey comb weaves and satin weaves having long floating yarns have large cover factor and were thicker. these structures of the weaves were good in warmth. 2. Thermal transmission was reciprocated to the cover factor, thickness and value of cover factor multiplied by thickness : It was found that the weaves of woven fabrics for warmth had better use of satin weaves, Matt weaves, Granite weaves and Honey comb weaves. In the time of warmth is not the first purpose, had better use of Rib weaves. Plain weaves and Twill weaves with thin thickness and high thermal transmission.