• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.85-88
• /
• 2003

In this study, porcelain insulator samples which have a different alumina composition were manufactured in order to test electrical and mechanical properties and make an analysis of the propagation phenomena of micro cracks on porcelain body. From XRD quantitative analysis the crystalline phases were different with alumina composition, sample C and D which have about 17wt% Corundum phase without the Cristobalite phase shows better electrical and mechanical properties than sample A and 8 which have the Cristobalite phase. In dielectrics test on porcelain samples with below 17wt% alumina composition, it was found that the amount of glass phase$(SiO_2)$have an main effect to decrease the dielectric loss$(tan{\delta})$, and the dielectric breakdown voltage of aluminous porcelain insulators was largely affected by its relative density. As a micro cracks analysis, HRS were measured, then the intensity of HRS increased with the amount of alumina composition. On the other hand, the propagation behaviors of cracks was fairly influenced by the distribution of pores.

• Journal of Korean Public Health Nursing
• /
• v.30 no.2
• /
• pp.247-258
• /
• 2016

Purpose: The purpose of this study was to evaluate the effects of a comprehensive exercise program for the prevention of urinary incontinence (UI), frailty, and depression, as well as the promotion of physical function in community-dwelling elderly female living alone. Methods: A nonequivalent control group pretest-posttest design was employed. The participants were 76 vulnerable elderly female with a mild-to-moderate urinary incontinence. The exercise group completed 12 weeks of a moderate intensity, comprehensive exercise program. Descriptive statistics, independent t-tests and ANCOVA were used for data analysis with SPSS. Results: Upon the completion of the 12-week exercise program, significant improvements for UI symptoms (p=.001), timed up and go (p<.001), frailty (p=.006), and depression (p<.001) were observed, but not for hand grip strength (p=.053). Conclusion: The findings of this study indicate that the 12-week comprehensive exercise program for the prevention of urinary incontinence had positive effects on improving UI symptoms, physical function, levels of frailty and depression in elderly women living alone. More prolonged exercise programs with other types of exercise should be developed for these vulnerable elderly women, and future studies are encouraged to confirm the effect of the comprehensive exercise program in other settings.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.734-737
• /
• 2004

The synthetic fibers such as polypropylene(PP) and polyvilyl-alcohol(PVA) fiber are poised as a low cost alternative for reinforcement in structural applications. It has been reported that synthetic fiber in cement composites can control restrained tensile stresses and cracks and increase toughness, resistance to impact, corrosion, fatigue and durability. High performance fiber reinforced cementitious composite(HPFRCCs) shows ultra high ductile behavior in the hardened state, because of the fiber bridging properties. Therefore, a variety of experiments have being performed to access the performance of HPFRCCs recently. The research emphasis is on the flexural behavior of HPFRCCs made in synthetic fibers, and how this affects the composite property, and ultimately its strain-hardening performance. Three-point bending tests on HPFECCs are carried out. As the result of the bending tests, HPFRCCs showed high flexural strength and ductility. HPFRCCs made in PVA or Hybrid fiber were, also, superior to PP of singleness. On the other hand, effect of sand volume fraction on HPFRCCs made in PP was insignificant.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.83-89
• /
• 2011

Laminar flow over a cube near a plane wall is numerically investigated in order to understand the effects of the cube-wall gap on the flow characteristics as well as the drag and lift coefficients. The main focus is placed on the three-dimensional vortical structures and its relation to the lift force applied on the cube. Numerical simulations are performed for the Reynolds numbers between 100 and 300, covering several different flow regimes. Without a wall nearby, the flow at Re=100 is planar symmetric with no vortical structure in the wake. However, when the wall is located close to the cube, a pair of streamwise vortices is induced behind the cube. At Re=250, the wall strengthens the existing streamwise vortices and elongates them in the streamwise direction. As a result, the lift coefficients at Re=100 and 250 increase as the cube-wall gap decreases. On the other hand, without a wall, vortex shedding takes place at Re=300 in the form of a hairpin vortex whose strength changes in time. The head of hairpin vortex or loop vortex, which is closely related to the lift force, seems to disappear due to the nearby wall. Therefore, unlike at Re=100 and 250, the lift coefficient tends to decrease more or less as the cube approaches the wall.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.103-110
• /
• 2000

To examine the physical properties of POY through the microstructure control, the crystal structure such as the crystallinity, the crystallite size, the orientation, the shrinkage, the tensile properties, and the thermal stress of POY(80/48, SD) were examined at different draw ratios and annealing temperatures. From the examination following conclusions were obtained : 1. The crystallinity was more effected by the heat setting temperature than by the draw ratio. The increasing rate was greatest at the heat setting temperature range of $170~190^\circ{C}$. 2. The crystallite size perpendicular to the fiber axis was more effected by the annealing temperature at lower draw ratios. On the other hand, the crystal and amorphous orientations were more effected by the heat setting at higher draw ratios. 3. The boiling shrinkage did not change significantly, but the total shrinkage showed 13% at the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$. 4. The maximum thermal stress increased with increasing the draw ratio and decreasing the heat setting temperature in the temperature range of $170~210^\circ{C}$. At the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$, the maximum thermal stress found was 1.1gf/d. 5. In the heat setting temperature above $170^\circ{C}$ after the drawing, the crystallinity, the crystallite size, the orientation, and the strength increased with increasing temperature, but the shrinkage and the maximum thermal stress decreased with increasing temperature.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.1
• /
• pp.11-23
• /
• 2002

The concentrations of aldehydes were measured in downtown area of Buchun and Kwanghwamoon of Seoul from October 1997 to August 1998 using 2-series impingers. The data have been analysed to identify the seasonal pattern of aldehyde sources in metropolitan areas. The measured concentration (in ppbv) of aldehydes were 8.86 $\pm$ 7.28 HCHO (formaldehyde) and 7.79$\pm$7.29 $CH_3$CHO (acetaldehyde) in Buchun, while recording 10.13$\pm$8.58 (HCHO) and 7.64$\pm$6.65 ($CH_3$CHO) in Kwanghwamoon. Their diurnal variation patterns showed significant increase of HCHO and $CH_3$CHO concentration in early afternoon, indicating an increase in secondary sources. Their concentrations however decreased in the nighttime, regardless of seasons. The strength of correlations between certain pairs such as (1) HCHO and CO and (2) $CH_3$CHO and CO were generally high during the winter months (0.64< r < 0.84), suggesting the possibility of similar source processes for HCHO, $CH_3$CHO and CO. On the other hand during the summer months, their correlations are frequently lower than winter months. We suggested that the complexity of source/sink processes during the summer period may reduce the correlations between aldehyde and CO.

• Korean System Dynamics Review
• /
• v.10 no.2
• /
• pp.103-120
• /
• 2009

Using various data derived from the regional innovation projects in the IT and BT-sectors within Chungbuk Province, this study tries to observe formation processes of network connecting structure and their spill-over effects. Considering the dynamic nature of key issues, it applies both social network analysis and causal loop methods. After a series of simulation exercises, we find that so-called extroverted regional innovation projects, that is, ones financially supported by the central government, reveal a higher tendency in the centrality, heavily depending on a handful of well reputed organizations. It is quite similar to the reinforcing mechanism, resulting in the rich-get-richer and the poor-get-poorer. Compared with the existing documents, nonetheless, it shows relatively weak in the mechanism strength, implying the fact that regional innovation projects have significantly contributed to ameliorating the unequal distribution of innovation organizations within Chungbuk Province. On the other hand, this study concludes that all the brokerage organizations related to the regional innovation projects have settled in Chungbuk Province. Whereas the Capital Region-based organizations present a higher tendency in the knowledge-network, it seems that the regional innovation projects have significantly contributed to upgrading direct and indirect competitiveness of the local organizations.

• Journal of Powder Materials
• /
• v.16 no.1
• /
• pp.63-67
• /
• 2009

In order to investigate the effect of rapid solidification on the microstructure and the mechanical properties of Al-Zn-Mg system alloys, water atomization was carried out, since the water atomization beared the highest solidification rate among the atomization processes. The as atomized alloy powders consisted of fine grains less than 4 ${\mu}m$ in diameter, and the second particles were not detected on XRD. The microstructure as solidified was maintained even after the spark plasma sintering at the heating rate of 50 K/min. On the other hand, lower rate of 20 K/min induced a formation of $MgZn_2$ particles, resulting in strengthening of the matrix. The density was almost constant at the temperature above 698K. The sintering temperature above 698K had no effect on the strength of the sintered materials.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.41-47
• /
• 1994

The effect of Azone and ethanol on the electrical properties of human and hairless mouse skin was studied and the results were compared. The complex electrical impedance was measured as a function of frequency, and resistance and capacitance were determined from Nyquist plot. After the treatment of human-heat separated epidermis with Azone, contrary to the expectation, resistance increased about 60% and it did not change with time. Capacitance also increased; immediately after the treatment, it was about 110% of pretreatment value and it increased further with time. On the other hand, when hairless mouse skin was treated with Azone, marked changes occured; resistance fell almost to the value of bathing medium itself and capacitance increased to about 200% of its pretreatment value. Similar result were obtained when hairless mouse skin was treated with 100% ethanol. The results suggest that there are differences in the strength of barrier properties of stratum corneum (SC) between human and hairless mouse skin. Overall, the results provide further mechanistic insight into ion conduction through the skin and into the role of SC lipids in skin capacitance.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.7
• /
• pp.7-17
• /
• 2020

Purpose: The purpose of this study was to identify factors that enhance the effectiveness of bulk text message advertising on consumer attention in the telecommunications industry in Zimbabwe. Research design, data and methodology: The study collected data using structured questionnaires. The study attracted 293 responses from consumer subscribers of the Zimbabwean telecommunications industry. Data was analysed using SPSS and measures of association, direction, strength and significance were used. Results: The study found out that the examined variables of bulk text messaging (Simplicity, Frequency and Informativeness) had a positive significant impact on consumers' attention (β= 0.645; p-value < 0.05). The study examined four bulk text advertising determinants, namely frequency, simplicity, informativeness and credibility. Only credibility was found to be statistically insignificant (p-value > 0.05), whilst frequency had an inverse effect on consumer attention. Simplicity of bulk text advertisements recorded a high positive and significant impact whilst informativeness was also positively, and significantly affecting consumer attention. Conclusions: The study concluded that for bulk text advertising to be effective, text messages should be informative, easy to understand and dispatched less frequently. It was further concluded that bulk text advertising should follow permission marketing where consumers consent before hand to be recipients of commercials.