• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Korean Journal of Health Education and Promotion
• /
• v.2 no.1
• /
• pp.56-80
• /
• 1984

The main objectives of the present study is to evaluate Physician's Health Education Activities by means of physician's direct response to the prepared questionnaire and patient's perception to the physician in the course of medical care. For the data collection, the present study was conducted from Aug. 16 to Oct. 7, 1983 for 739 patients and 91 physicians who were attended outpatient clinics of 5 general hospitals in Seoul. The major findings are summarized as follows: 1. Self-evaluation on Physician's Health Education Activities (1) In consideration of health education services for the patient, the data revealed that 9.9% of the sampled physician wanted to strength public health and preventive medicine lecture in the curricula at medical education. On the other hand, only 1.1% expressed that they wanted to make it short. (2) In consideration of the necessity of health education service, it was shown that 95.6% of physicians agreed to take it into consideration. Self expression for the practice of health education was placed on the 3.15 score when 5 point scale used. (3) To evaluate the degree of an explanation about medical care for the patient, Index score with 4 point scale was employed. The Index score for the first time was shown that scale was placed on 3.23 for 'diagnosis', 3.12 for 'progress of the disease', 3.11 for 'discription of procedure' and 3.02 for 'cause of the disease' respectively. In comparison of the physician's explanation about the status of disease for the first and the second visitors to clinic, they evaluated themselves as giving more detailed explanation for the second visitors rather than the first visitors. 2. Physician's Health Education Services evaluated by patients (1) To evaluate physician-patient communication at beginning time for taking history about disease, the Index score with 5 point scale was employed. The data on taking history have shown that the score placed on 3.07 for those patients who visited the first time and 2.53 for second visitors. And the score about listening from the patients was placed on 3.52 and 3.42 respectively. (2) The Index score with 5 point scale, as used before, was also employed to evaluate medical care services for the patient. The data evaluated by the patients was shown that the score placed on 4.21 for patient treatment in general, 4.58 for physician's credibility, and 3.6 for physician's kindness. However, approximately 80% of those who failed to understand physician's explanation was caused by highly sophisticated medical terminology. (3) According to the Index score with 4 point scale, to evaluate physician's explanation, the data was shown that the patient who visited the first time gave 2.51 for 'diagnosis', 2.35 for 'progress', 2.11 for 'cause of the disease' and so on. It is acknowledged on the whole that the patients who visited the second time have more satisfaction in physician's explanation about their disease, than those who visited the first time. 3. Comparison of self-evaluation of Physician's Health Education Activities and patient's perception. (1) There was communication barriers between physicians and patients in expressing some medical terminology. For example physician understood that they explained more than 50% of medical terminology into common words for the patient, but 30% of patient complained medical terminology used by physician. (2) Comparing the index score of health education practice recognized by patients and physicians for both first visit and revisit groups, it was shown that the Index score of health education activities evaluated by physicians themselves were slightly higher than the score evaluated by patients.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.89-97
• /
• 2005

Recently, for the problem solution of demand and supply imbalance of fine aggregate due to the shortage of natural fine aggregate resource and the environment regulation on sea sand extraction in the construction field, the studies for the application of recycled fine aggregate using waste concrete are being progressed versatilely. On the other hand, the treatment of fly-ashes that of industrial by-product originated in the steam power plant is discussed by the continuous increasing of origination quantities. In the ease of using fly-ash, advantages are the improvement of workability, viscosity and long-time strength, and the reduction of hydration heat under the early ages, as the admixtures for concrete, but the studies for the application of fly-ash as recycled concrete admixtures are inadequacy. There fore, in this study, through investigating the properties of fresh, hardened and durability according to the replacement of recycled fine aggregate and fly-ash, it is intended to propose the fundamental data for structural application of recycled concrete using recycled fine aggregate and fly-ash. As the result of this study, they arc shown that the engineering properties and durability, in the case of replacement ratio 100% of recycled fine aggregate, arc similar to those of concrete using natural fine aggregate, so it is considered that recycled fine aggregate could be used as the fine aggregate for concrete. Also, the performances of recycled concrete are improved by replacing fly-ash.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.133-146
• /
• 2001

We report the results of structural field observation and measurement of anisotropy of magnetic susceptibility (AMS) of the diamictitic Hwanggangri Formation distributed in Chungju-Suanbo area of the Okchon Belt, Korea. The outcrops of the Hwanggangri Formation show two types of cleavage in general: slaty cleavage (SI) and crenulation cleavage (5z). 5] cleavage is, however, well observable only in the notheastem (NE) part of study area, while overwhelmed by 52 cleavage in the southwestern (5W) part, indicating stronger later deformation in 5W part of the study area. This partitioning of the study area is corroborated by both IRM and AMS parameters: NE part of the study area is characterized by higher IRM intensity, higher bulk magnetic susceptibility, higher AM5 degree, and by oblate shape of magnetic susceptibility ellipsoid. Their values become drastically lowered toward southwest, and reach to a stable minimum in the whole 5W part of the study area. In addition, degree of both metamorphism and deformation tends to increase gradually from northeast toward southwest and also from northwest toward southeast in the study area. Based on the distribution pattern of the principal axes ( $k_1, k_2, k_3$ axes) of magnetic anisotropy ellipsoids revealed in the NE part of the study area, three episodes of deformation ( $D_1, D_2, D_3$ ) are recognized: D_1$ deformation produced $S_2$ cleavage with NE-5W trend, which is caused by a strong NW-SE tlattening of a coaxial pure shear. $D_2$ deformation produced 5z cleavage characterized by a non-coaxial deformation. It was caused by a ductile or semi-ductile thrusting toward NW and concurrent sinistral shearing along $S_2$ cleavage plane. Lastly, $D_3$ deformation produced tlexural folding of all previous structures with a nearly horizontal NE fold axis. Distribution pattern of the principal axes of magnetic anisotropy ellipsoid from the SW part of the study area, on the other hand, does not show any coherency among sites or samples. We interpret that this dispersed pattern of $k_1, k_2, k_3$ axes together with lower anisotropy strength indicates that magnetic fabrics in the SW part have been disturbed either by a superposition of strong deformation/metamorphism or by a kind of reciprocal strain due to an overlapping of $D_1$ and $D_2$ or by both processes.

• Women's Health Nursing
• /
• v.7 no.4
• /
• pp.518-535
• /
• 2001

Nursing practices should be based on the understanding of human beings. In order to understand human beings, it is important to study the lifestyles and thoughts of people in their natural environment. In this sense, the cultural aspects of a society need to be studied for a culture-bound nursing service. Child care, which is an important element of nursing, is also strongly influenced by the culture of a society. Therefore, a cultural study is necessary to understand the child-rearing practices of any society. The major purpose of this dissertation is to provide basic foundations for developing a culture-based theory for nursing intervention through studying traditional cultural elements of child care in Korean society. The study examined child-rearing practices in a small village on Koje Island in the southern part of Korea. It utilized ethnographic methodologies including participatory observations and in-depth interviews. The study participants were 9 Korean mothers living on Koje Island. The average age was 52. The data were collected between July in 1998 and December in 1999. The average number of interviews per person was 7-8, and the duration of each interview was approximately 2 hours. The data were analyzed using the Spradley Analytical Method. The following 9 major child-rearing aspects of mothers on Koje Island were discovered as a result of the study: 1. Firstly, mothers on Koje Island were mostly concerned about the "Old Birth Goddess' Curse", especially during their child's early years. This concern was evidenced by their careful behavior when their child was very young and by their praying to the Old Birth Goddess not to be jealous of their babies. 2. Secondly, they wished their children to live a different and better life than themselves. It was represented by their strong motivation toward their children's education as well as their expectation for their children's success. In traditional Korean culture, Korean people think that the rise and fall of the household depend on their offsprings. Therefore, Korean mothers wish their children attain to a higher level of social status through education. 3. Third, mothers are concerned about their children's righteousness. Mothers on Koje island expect their children to live with discretion, justice, strength, respect, harmony, and to do their best in life. 4. Next was an 'anticipation of their children's happy marriage'. The attributes of this category were an 'anxiety about their children's married life', and 'an expectation of a good spouse for their children'. Because Korean people believe that only a son can continue the bloodline of a family, especially Korean mothers have a great concern of the possibility of their daughters not having a son after marriage. Also they have different expectations toward their daughter-in-laws than son-in-laws. 5. Korean mothers also derived their satisfaction from their son. It was characterized by 'excessive affection toward their son', 'dependency on their son', and 'being afraid of their married daughter having a girl like themselves'. Korean society has been a patriarchy. Therefore, a son is beloved as someone who will take care of his old parents, be in charge of ancestral rites, and provide a daughter-in-law who can conceive a son. 6. The sixth category concerned 'the differences in their expectations for their children'. The attributes in this category were 'different expectations depending on their children's gender', 'different expectations depending on their children's ability', and a 'great sympathy toward children with low abilities'. Korean mothers expect their son to become better than their daughter. 7. The seventh category was related to their 'roles in child-caring practices'. Traditionally a child was raised in an extended family system in Korea So it was not the sole duty of a mother to bring up the child. Korean mothers used to receive much help rasing children from their in-laws, and family members. On the other hand, many children grew up by themselves, because their mothers were very busy taking care of housework. Furthermore, many children also grew up in poverty. 8. Mothers also had issues related to 'conflicts in child rearing'. They were characterized by 'lack of understanding', 'rudeness of children', and 'giving vent to one's anger'. 9. Finally, mothers regretted not doing their best in child-rearing practices. It was characterized by a 'bitter feeling of repentance', 'feeling irritated', and 'feeling of unsatisfaction'.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2018

As part of a research dedicated to the field evaluation of the durability of concrete subjected to freezing-thawing, this study analyzes the relationship between the surface roughness and the relative dynamic elastic modulus through image analysis. Four mix compositions with water-to-binder ratios (W/B) of 40%, 50%, 60% and 70% and without AE agent were considered to provoke early freezing. The basic physical properties of the mixes including the relative dynamic elastic modulus and the compressive strength were first evaluated experimentally according to W/B. Then, tests were performed to measure the surface roughness followed by photographs and SEM image analysis. The measured surface roughness tended to increase with larger number of freezing-thawing cycles regardless of W/B. The relative dynamic elastic modulus appeared to increase gradually with the number of cycles for the relatively denser mixes with W/B of 40% and 50%. Besides, the surface roughness increased only at rupture for the mixes with W/B of 60% and 70%. Moreover, the analysis of the photographs of the surface of the mixes with W/B of 40% and 50% revealed that the degradation progressed gradually from the surface with the freezing-thawing cycles. However, for the mixes with W/B of 60% and 70%, apparent change of the surface remained very insignificant until rupture at which damage like cracking could be observed. Consequently, the analysis of surface photograph or the measurement of the surface roughness presented some limitation in assessing the degree of freezing-thawing-induced degradation in case of relatively porous specimens. On the other hand, the photograph and surface roughness appeared to be sufficient for assessing such degradation for the mixes with W/B of 40% and 50%. Accordingly, the image of the surface and the surface roughness are potentially applicable on site for the assessment of freezing-thawing damages in relatively dense mixes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.1
• /
• pp.27-35
• /
• 1986

In succession to the previous paper, the present study was directed to investigate the effect of keeping freshness of conger eel (Astroconger myriaster) and yellowtail (Seriola quinqueradiata) by partial freezing, and the changes in the physical properties of fish meat paste product prepared with the muscle of conger eel during storage were also examined. The results obtained are summarized as follows: The period of keeping freshness (days in which k value reaches $20\%$) of conger eel and yellowtail by partial freezing was 10 days and 6 days, respectively. VBN content in the conger eel muscle showed 39.5 mg/100g by icing for 15 days, and did not show a great change by partial freezing and freezing, while that of yellowtail muscle reached at 32 mg/100g by icing, 20 mg/100g by partial freezing and 18 mg/100g by freezing for 15 days. The lipids extracted from the muscles of both fishes by icing were remarkably oxidized than those by partial freezing. The myofibrillar protein in the conger eel muscle during storage for 9 days decreased $3\%,\;10%\;and\;11\%$ by icing, partial freezing and freezing, respectively, and that of yellowtail muscle did $16\%,\;10%\;and\;4\%$ by icing, partial freezing and freezing, respectively. On the other hand, the alkali-soluble protein in both fishes increased with storage time. Gel strength of fish meat paste product prepared with the muscle of conger eel decreased to $35\%$ by icing, $74\%$ by partial freezing and $76\%$ by freezing for 10 days compared to control, and the expressible water increased 1.6 times, 1.2 times and 1.1 times by icing, partial freezing and freezing, respectively, as much as that of control product.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.944-948
• /
• 1999

The morphological properties of four binary blends of polyethylene synthesized by metallocene catalyst(MCPE) and four polyolefins prepared by Ziegler-Natta catalyst have been investigated to interpret the effect of micro-molecular structure on the phase morphology and interfacial behavior; four binary blend systems studied are high density polyethylene(HDPE)-metallocene polyethylene (MCPE), polypropylene(PP)-MCPE, poly(propylene-co-ethylene) (CoPP)-MCPE, and poly(propylene-co-ethylene-co-1-butylene) (TerPP)-MCPE, and they are all phase separated. The HDPE-MCPE blend shows evenly growing homogeneous HDPE domain on the continuous MCPE phase, on the other hand, the rest of three blends show complex heterogeneous phase behavior. The PP-MCPE blend shows that PP and MCPE and completely phase separated and phase inversion takes place at 50% MCPE. The CoPP-MCPE and TerPP-MCPE show enhanced interface due to the same micro-molecular structure of ethylene, and phase inversion takes place at 40% MCPE. In particular, TerPP-MCPE blend shows improved phase morphology between interfaces, and this may be arisen from the comonomer contents in TerPP, which are 1-butene and ethylene having the same chemical structure as that of MCPE. The enhancement of the phase morphology in the TerPP-MCPE blend is correlated with the mechanical and morphological properties. Thus, although the four blend systems are phase separated, the phase morphology suggests that the order of interfacial adhesion strength be HDPE-MCPE > TerPP-MCPE > CoPP-MCPE > PP-MCPE and that micro-molecular structure between constituents be one of major factors giving enhanced interfacial adhesion.

• Journal of Fashion Business
• /
• v.1 no.1
• /
• pp.71-83
• /
• 1997

The purpose of this study is to analyze the present fashion phenomenon by considering the types of street fashion, the center of avant-grade modern fashion, that shows the origination background and special feature concretely. The times was defined through the 1980's from World War II that street style originated, so the range of study was the 1990's when the street style was influenced by that of the past and was revived. The ways of study were to analyze the records of ideology, art and music connected with the street style from World War II to the present when it has risen. The summary of result is as follows. (1) In the 1940's, Zooties was the jet of desire suppressed by African-Americans that couldn't receive favors socially and economically and Hipsters pursued reformative bebop that made up of soft Jazz. In the 1950's, Modernists were running after Cool Jazz to the minimum. In the 1970's, Funk appered in the sexual desire and erotic strength, and was surfaced from Negro Getto. In the 1980's B-boys & Flygirls showed the street style by the scribble art of slum in the New York. As mentioned above, In the 1990's, Acid Jazz influenced by the Jazz of Negro has been the fashion added to the tradition of musical form that come from eclecticism of Jazz tended Neo-Jazz. (2) In the 1940's, Western style dreamed the country life because of rapid urbanization. In the 1950's, Beat obtained the feeling of liberation from the dissolute life and activity. In the 1960's, Psychedelics showed the freedom affected by the Pop-art and Op-art, and Hippies pursued the true individuality as 'love & peace' life style and the return to nature. In the 1990's, Grunge look influenced by the above has been fashion that shows the practical use of second-hand clothing or patchwork contrary to elitism. (3) In the 1940's, Caribbean style appered in the typical textile color with the center of West Indies. In the 1960's, Rude boys showed the magnificence and difficulty of Jamaica, and Rastafarians had a tendency to come back to the ancient civilization of America. In the 1970's, Two-tone was the simple clothing for harmonizing among human races. In the 1990's, Jamaica look influenced by the above has been the Lege fashion introduced to a high fashion, appearing in the special bright color, applique, unique hair style, and so on. (4) In the 1950's, Sufers pursued natural rhythm, getting out of everything. In the 1970' s, Skaters enjoyed the speed on the paved road. In the 1980's, Casuals emphasized the spirit of cooperation of young-things. In the 1990's, Casual look Influenced by the above has been the fashion that forms the activity, function and strong spirit of cooperation by pursuing comfortable life and sports in the tension of life and variety of modern society. (5) It was hard for Bikers to adjust themselves in society after the war. In the 1950's, Coffee bar cowboys were the reckless running boys in the leather jacket. In the 1960's, Rockers created the group originality as disobedient outsiders and Greasers imitated Rolling Stones. In the 1980's, Punks resisted the viewpoint of the old generation in offensive fashion. In the 1990's, Cyberpunk influenced by the above has pursued the classless structure, electronic music and metallic clothing that forebodes gloomily as the computer generation of ultra-modern science times. Accordingly, in understanding a complex modern fashion phenomenon, it was analyzed that the street styles of the past, from World War II to the 1980's, were reflected in that of the 1990's dividing into the five types in a word, namely Acid Jazz, Grunge look, Jamaica look, Casual look and Cyberpunk.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.62-69
• /
• 2003

The aim of research is the evaluation of the $Cr^{6+}$ emission features of the liquid injection through emission experiments in varying conditions, based on a field-mixing ratio. The results showed that the content of $Cr^{6+}$ content in cement measured had an Ordinary Potland Cement (OPC) of 25.3 mg/kg, which constitute the largest portion among the other materials. Likewise, the emission experiment of homo-gel and sand-gel generally satisfied the standard of KSLT (Korea Standard Leaching Test) in waste of 1.5 mg/L, but in case of the standard of KSLT in soil the emission of OPC $Cr^{6+}$ of 4.85 mg/kg. These conditions is a little exceeded the criteria in the ‘Ga’ area in terms of Korea Soil Environmental Preservation Law. In addition, results generated by the mock-up injection facilities revealed that $Cr^{6+}$ emission increased as Water/Cement and injection pressure increased. At injection pressure higher than 4 kg/㎤, $Cr^{6+}$ emission exceeded the water preservation standard of 0.5 mg/L. Similarly, a pattern experiment of C $r^{6+}$ emission according to pH was conducted, in order to evaluate the $Cr^{6+}$ emission features of grout materials in leachate below pH 5 such as pH 4 acid rain or landfill. Results show that $Cr^{6+}$ emission dramatically increased in high acidic or basic state. It indicates that $Cr^{6+}$ emission will probably increase in an environment where grout materials are injected. On the other hand, concentration of leachate was determined in areas where grout materials are used. The results show that the concentration of emission in an ultra purity condition does not manifest intensity, and is affected in the OPC>MC>SC order. It means that the pollutants or $Cr^{6+}$ emission increases with decreasing concentration. As such, $Cr^{6+}$ emission will probably exceed the countermeasure criteria according to the types of gout materials. Similarly, high pressure or injection will cause increased $Cr^{6+}$ emission. Therefore, the selection of materials or mixing ratio should be considered in general as well as according to specific industries, based on the strength and pH of $Cr^{6+}$ emission.