• 제목/요약/키워드: hand pattern prediction

검색결과 22건 처리시간 0.026초

보다 정확한 동적 상황인식 추천을 위해 정확 및 오류 패턴을 활용하여 순차적 매칭 성능이 개선된 상황 예측 방법 (Context Prediction Using Right and Wrong Patterns to Improve Sequential Matching Performance for More Accurate Dynamic Context-Aware Recommendation)

  • 권오병
    • Asia pacific journal of information systems
    • /
    • 제19권3호
    • /
    • pp.51-67
    • /
    • 2009
  • Developing an agile recommender system for nomadic users has been regarded as a promising application in mobile and ubiquitous settings. To increase the quality of personalized recommendation in terms of accuracy and elapsed time, estimating future context of the user in a correct way is highly crucial. Traditionally, time series analysis and Makovian process have been adopted for such forecasting. However, these methods are not adequate in predicting context data, only because most of context data are represented as nominal scale. To resolve these limitations, the alignment-prediction algorithm has been suggested for context prediction, especially for future context from the low-level context. Recently, an ontological approach has been proposed for guided context prediction without context history. However, due to variety of context information, acquiring sufficient context prediction knowledge a priori is not easy in most of service domains. Hence, the purpose of this paper is to propose a novel context prediction methodology, which does not require a priori knowledge, and to increase accuracy and decrease elapsed time for service response. To do so, we have newly developed pattern-based context prediction approach. First of ail, a set of individual rules is derived from each context attribute using context history. Then a pattern consisted of results from reasoning individual rules, is developed for pattern learning. If at least one context property matches, say R, then regard the pattern as right. If the pattern is new, add right pattern, set the value of mismatched properties = 0, freq = 1 and w(R, 1). Otherwise, increase the frequency of the matched right pattern by 1 and then set w(R,freq). After finishing training, if the frequency is greater than a threshold value, then save the right pattern in knowledge base. On the other hand, if at least one context property matches, say W, then regard the pattern as wrong. If the pattern is new, modify the result into wrong answer, add right pattern, and set frequency to 1 and w(W, 1). Or, increase the matched wrong pattern's frequency by 1 and then set w(W, freq). After finishing training, if the frequency value is greater than a threshold level, then save the wrong pattern on the knowledge basis. Then, context prediction is performed with combinatorial rules as follows: first, identify current context. Second, find matched patterns from right patterns. If there is no pattern matched, then find a matching pattern from wrong patterns. If a matching pattern is not found, then choose one context property whose predictability is higher than that of any other properties. To show the feasibility of the methodology proposed in this paper, we collected actual context history from the travelers who had visited the largest amusement park in Korea. As a result, 400 context records were collected in 2009. Then we randomly selected 70% of the records as training data. The rest were selected as testing data. To examine the performance of the methodology, prediction accuracy and elapsed time were chosen as measures. We compared the performance with case-based reasoning and voting methods. Through a simulation test, we conclude that our methodology is clearly better than CBR and voting methods in terms of accuracy and elapsed time. This shows that the methodology is relatively valid and scalable. As a second round of the experiment, we compared a full model to a partial model. A full model indicates that right and wrong patterns are used for reasoning the future context. On the other hand, a partial model means that the reasoning is performed only with right patterns, which is generally adopted in the legacy alignment-prediction method. It turned out that a full model is better than a partial model in terms of the accuracy while partial model is better when considering elapsed time. As a last experiment, we took into our consideration potential privacy problems that might arise among the users. To mediate such concern, we excluded such context properties as date of tour and user profiles such as gender and age. The outcome shows that preserving privacy is endurable. Contributions of this paper are as follows: First, academically, we have improved sequential matching methods to predict accuracy and service time by considering individual rules of each context property and learning from wrong patterns. Second, the proposed method is found to be quite effective for privacy preserving applications, which are frequently required by B2C context-aware services; the privacy preserving system applying the proposed method successfully can also decrease elapsed time. Hence, the method is very practical in establishing privacy preserving context-aware services. Our future research issues taking into account some limitations in this paper can be summarized as follows. First, user acceptance or usability will be tested with actual users in order to prove the value of the prototype system. Second, we will apply the proposed method to more general application domains as this paper focused on tourism in amusement park.

손가락 동작과 힘 추정 시스템 (Motion and Force Estimation System of Human Fingers)

  • 이동철;최영진
    • 제어로봇시스템학회논문지
    • /
    • 제17권10호
    • /
    • pp.1014-1020
    • /
    • 2011
  • This presents a motion and force estimation system of human fingers by using an Electromyography (EMG) sensor module and a data glove system to be proposed in this paper. Both EMG sensor module and data glove system are developed in such a way to minimize the number of hardware filters in acquiring the signals as well as to reduce their sizes for the wearable. Since the onset of EMG precedes the onset of actual finger movement by dozens to hundreds milliseconds, we show that it is possible to predict the pattern of finger movement before actual movement by using the suggested system. Also, we are to suggest how to estimate the grasping force of hand based on the relationship between RMS taken EMG signal and the applied load. Finally we show the effectiveness of the suggested estimation system through several experiments.

Mobility Prediction Algorithms Using User Traces in Wireless Networks

  • Luong, Chuyen;Do, Son;Park, Hyukro;Choi, Deokjai
    • 한국멀티미디어학회논문지
    • /
    • 제17권8호
    • /
    • pp.946-952
    • /
    • 2014
  • Mobility prediction is one of hot topics using location history information. It is useful for not only user-level applications such as people finder and recommendation sharing service but also for system-level applications such as hand-off management, resource allocation, and quality of service of wireless services. Most of current prediction techniques often use a set of significant locations without taking into account possible location information changes for prediction. Markov-based, LZ-based and Prediction by Pattern Matching techniques consider interesting locations to enhance the prediction accuracy, but they do not consider interesting location changes. In our paper, we propose an algorithm which integrates the changing or emerging new location information. This approach is based on Active LeZi algorithm, but both of new location and all possible location contexts will be updated in the tree with the fixed depth. Furthermore, the tree will also be updated even when there is no new location detected but the expected route is changed. We find that our algorithm is adaptive to predict next location. We evaluate our proposed system on a part of Dartmouth dataset consisting of 1026 users. An accuracy rate of more than 84% is achieved.

A Study of Ceramic Injection Molding of Watch Case Composed of $ZrO_2$ Powder

  • Kwak, T.S.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.505-506
    • /
    • 2006
  • This study is focused on the manufacturing technique of powder injection molding of watch case made from zirconia powder. A series of computer simulation processes were applied to the prediction of the flow pattern in the inside of the mould and defects as weld-line. The material properties of melted feedstock, including the PVT graph and thermal viscosity flowage properties were measured to obtain the input data to be used in a computer simulation. Also, a molding experiment was conducted and the results of the experiment showed a good agreement with the simulation results for flow pattern and weld line location. On the other hand, gravity and inertia effects have an influence on the velocity of the melt front because of the high density of ceramic powder particles during powder injection molding in comparison with polymer's injection molding process. In the experiment, the position of the melt front was compared with the upper gate and lower gate positions. The gravity and inertia effect could be confirmed in the experimental results.

  • PDF

우리나라 여름철 월별 기온 변동성과 유라시아 봄철 눈덮임 간의 상관성 분석 (Relationship Between Korean Monthly Temperature During Summer and Eurasian Snow Cover During Spring)

  • 원유진;예상욱;임보영;김현경
    • 대기
    • /
    • 제27권1호
    • /
    • pp.55-65
    • /
    • 2017
  • This study investigates how Eurasian snow cover in spring (March and April) is associated with Korean temperature during summer (June-July-August). Two leading modes of Eurasian snow cover variability in spring for 1979~2015 are obtained by Empirical Orthogonal Function (EOF) analysis. The first EOF mode of Eurasian snow cover is characterized by a zonally elongated pattern over the whole Eurasian region and its principal component is more correlated with Korean temperature during June. On the other hand, the second EOF mode of Eurasian snow cover is characterized by an east-west dipole-like pattern, showing positive anomalies over eastern Eurasian region and negative anomalies over western Eurasian region. This dipole-like pattern is related with Korean temperature during August. The first leading mode of Eurasian snow cover is associated with anomalous high (low) pressure over Korea (Sea of Okhotsk) during June, which might be induced by much evaporation of soil moisture in Eurasia during March. On the other hand, the second mode of Eurasian snow cover is associated with a wave train resembling with Eurasian (EU)-like pattern in relation to the Atlantic sea surface temperature forcing, leading to the anomalous high pressure over Korea during August. Understanding these two leading modes of snow cover in Eurasian continent in spring may contribute to predict Korean summer temperature.

행동 패턴 기반 범죄 예측 모델 연구 (Crime prediction Model with Moving Behavior pattern)

  • 최종원;최지현;윤용익
    • 한국위성정보통신학회논문지
    • /
    • 제11권1호
    • /
    • pp.55-57
    • /
    • 2016
  • 본 논문에서는 CCTV 기반의 행동인식과 ConvexHull을 이용한 손의 패턴 인지를 통한 이상행동을 판단하는 알고리즘을 제시하고 있다. CCTV를 이용한 기존 범죄 예방에는 주로 얼굴 인식이 쓰인다. 이는 화면에 보이는 얼굴과 기존 범죄자와 수배자의 얼굴 정보를 대조하여 대상의 위험도를 판단하는 방식으로, 앞으로의 범죄행동 예측에는 어려움이 따른다. 따라서 보다 다양한 상황을 예측하기 위해 대상의 팔과 다리, 몸의 기울기 등의 움직임과 손의 패턴을 파악하여 이상행동을 판단한다. 몸의 움직임이 일반적인 행동을 벗어났다고 판단될 때 대상의 행동패턴을 파악하여 폭력과 납치 등의 행동패턴과 비교하여 범죄를 예측할 수 있다.

이동 멀티미디어 컴퓨팅 환경에서 사용자의 이동성 패턴을 이용한 호 수락 제어 메커니즘 (A Mechanism for Call Admission Control using User's Mobility Pattern in Mobile Multimedia Computin Environment)

  • 최창호;김성조
    • 한국정보과학회논문지:정보통신
    • /
    • 제29권1호
    • /
    • pp.1-14
    • /
    • 2002
  • 이동 컴퓨팅 환경에서 멀티미디어 트래픽 제공에 관련된 가장 중요한 이슈는 이동 호스트(클라이언트)에게 지속적인 QoS(Quality of Service)를 보장하는 것이다. 그러나, 핸드-오프를 초래하는 클라이언트의 이동성으로 인해 클라이언트와 네트워크간에 협상된 QoS가 보장되지 못할 수도 있다. 본 논문에서는 이동 컴퓨팅 환경에서 멀티미디어 트래픽에 대해 지속적인 QoS를 지원하기 위한 호 수락 제어 메커니즘을 제안한다. 각 셀은 핸드-오프 호를 위해 이웃 셀로부터 대역폭을 예약한다. 만약, 핸드-오프 호를 위해 필요 이상으로 대역폭이 예약된다면 신규 호의 블록킹 확률이 증가하므로, 핸드-오프 호를 위해 예약할 대역폭의 크기를 정확히 결정하는 것이 중요하다. 본 논문에서는 예약할 대역폭의 정확한 크기를 결정하고, 네트워크 상태에 다라 이 크기를 적응적으로 조정하기 위해 MPP(Mobility Pattern Profile)와 2-계층 셀 구조를 기반으로 한 적응적 대역폭 예약을 제안한다. 또한, MPP를 이용한 다음-셀 예측 기법과 적응적 대역폭 예약을 기반으로 한 호 수락 제어 메커니즘을 제안한다. 본 논문에서 제시된 호 수락 제어 메커니즘의 성능을 평가하기 위해, 신규 호 블록킹률, 핸드-오프 호 종료율, 대역폭 이용률을 측정하였다. 시뮬레이션 결과, 본 논문의 호 수락 제어 메커니즘의 성능이 NR-CAT1, FR-CAT1, AR-CAT1과 같은 기존의 메커니즘들보다 우수함을 알 수 있었다.

유동방향과 밀도이방성 분석을 위한 세라믹 분말사출성형 해석 (Simulation of Ceramic Powder Injection Molding Process to Clarify the Change of Sintering Shrinkage Depending on Flow Direction)

  • 곽태수;서원선
    • 한국세라믹학회지
    • /
    • 제46권3호
    • /
    • pp.229-233
    • /
    • 2009
  • This study has focused on manufacturing technique of powder injection molding of watch case made from zirconia powder. A series of computer simulation process was applied to prediction of the flow pattern in the inside of the mould to clarifying the change of sintering shrinkage depended on flow direction. The material properties of melted feedstock inclusive of the PVT graph and thermal viscosity flowage properties were measured for obtaining the input data in computer simulation. Also, molding experiment was conducted and the results of experiment showed that good agreement with simulation results for flow pattern and weld line location. On the other hand, gravity and inertia effect have an influence on velocity of melt front because of high density of ceramic powder particles in powder injection molding against the polymer injection molding process. In the experiment, the position of melt front was compared with upper gate and lower gate position. The gravity and inertia effect could be confirmed in the experimental results.

지르코니아$(ZrO_2)$ 분말을 이용한 시계케이스의 세라믹 사출성형 (Ceramic injection molding of the watch case composed by zirconia$(ZrO_2)$ powder)

  • 곽태수;신호용;임종인
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.275-278
    • /
    • 2005
  • This study has focused on manufacturing technique of powder injection molding of watch case which made from zirconia powder. A series of computer simulation process was applied to prediction of the flow pattern in the inside of the mould and defects as weld line. The material properties of melted feedstock inclusive of the PVT graph and thermal viscosity flowage properties were measured for obtaining the input data in computer simulation. Also, molding experiment was conducted and the results of experiment showed that good agreement with simulation results far flow pattern and weld line location. On the other hand, gravity and inertia effect have an influence on velocity of melt front because of high density of ceramic powder particles in powder injection molding against the polymer injection molding process. In the experiment, the position of melt front was compared with upper gate and lower gate position. The gravity and inertia effect could be confirmed in the experimental results.

  • PDF

자동기계학습 TPOT 기반 저수위 예측 정확도 향상을 위한 시계열 교차검증 기법 연구 (A Study on Time Series Cross-Validation Techniques for Enhancing the Accuracy of Reservoir Water Level Prediction Using Automated Machine Learning TPOT)

  • 배주현;박운지;이서로;박태선;박상빈;김종건;임경재
    • 한국농공학회논문집
    • /
    • 제66권1호
    • /
    • pp.1-13
    • /
    • 2024
  • This study assessed the efficacy of improving the accuracy of reservoir water level prediction models by employing automated machine learning models and efficient cross-validation methods for time-series data. Considering the inherent complexity and non-linearity of time-series data related to reservoir water levels, we proposed an optimized approach for model selection and training. The performance of twelve models was evaluated for the Obong Reservoir in Gangneung, Gangwon Province, using the TPOT (Tree-based Pipeline Optimization Tool) and four cross-validation methods, which led to the determination of the optimal pipeline model. The pipeline model consisting of Extra Tree, Stacking Ridge Regression, and Simple Ridge Regression showed outstanding predictive performance for both training and test data, with an R2 (Coefficient of determination) and NSE (Nash-Sutcliffe Efficiency) exceeding 0.93. On the other hand, for predictions of water levels 12 hours later, the pipeline model selected through time-series split cross-validation accurately captured the change pattern of time-series water level data during the test period, with an NSE exceeding 0.99. The methodology proposed in this study is expected to greatly contribute to the efficient generation of reservoir water level predictions in regions with high rainfall variability.